Articles with "sidewall" as a keyword



Large eddy simulations fire modeling of JIS A 1310 façade calibration test with respect to sidewall

Sign Up to like & get
recommendations!
Published in 2024 at "Fire and Materials"

DOI: 10.1002/fam.3192

Abstract: The full‐scale façade standard test is widely employed as a comprehensive method to assess the façade fire spread. Within this approach, the calibration test without combustible façade decouples the intricate interaction between gas‐phase combustion and… read more here.

Keywords: large eddy; ade; sidewall; test ... See more keywords
Photo from wikipedia

Dynamic analysis of flexural vibration mode of an atomic force microscope cantilever with a sidewall probe in liquid

Sign Up to like & get
recommendations!
Published in 2020 at "Microscopy Research and Technique"

DOI: 10.1002/jemt.23636

Abstract: In this paper, dynamic behavior and the resonance frequencies of flexural vibration modes of an atomic force microscope cantilever with sidewall probe immersed in liquid to surface stiffness variations have been investigated and a closed‐form… read more here.

Keywords: cantilever; microscope cantilever; flexural vibration; sidewall ... See more keywords

Fixture Locating Modelling and Optimization Research of Aluminum Alloy Sidewall in a High-Speed Train Body

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Shanghai Jiaotong University (science)"

DOI: 10.1007/s12204-020-2212-1

Abstract: The high-speed train body is welded with aluminum alloy assemblies or parts. Due to the material properties, the welding deformation is much significant. In order to control the welding deformation, this paper takes the sidewall… read more here.

Keywords: speed train; sidewall; fixture locating; fixture ... See more keywords
Photo from wikipedia

Investigations on burr formation mechanisms in micro milling of high-aspect-ratio titanium alloy ti-6al-4 v structures

Sign Up to like & get
recommendations!
Published in 2020 at "International Journal of Mechanical Sciences"

DOI: 10.1016/j.ijmecsci.2020.105884

Abstract: Abstract Micro-scale features with high aspect ratios are used extensively in aerospace parts and biomedical implants. However, burrs produced during the micro-milling process seriously affect surface quality and performance of high aspect ratio structures. In… read more here.

Keywords: aspect ratio; sidewall; ratio; high aspect ... See more keywords

Investigation of sidewall damage induced by reactive ion etching on AlGaInP MESA for micro-LED application

Sign Up to like & get
recommendations!
Published in 2021 at "Journal of Luminescence"

DOI: 10.1016/j.jlumin.2021.117937

Abstract: Abstract Previous reports have studied the impact of sidewall defects on AlGaInP micro light emitting diode (μLED) only by Current-Voltage-Luminescence (I-V-L) measurements. In this work, we propose an alternative approach to investigate these defects directly… read more here.

Keywords: sidewall; reactive ion; ion etching; ion ... See more keywords

Effect of tool sidewall thickness on groove profile in JECM

Sign Up to like & get
recommendations!
Published in 2025 at "Materials and Manufacturing Processes"

DOI: 10.1080/10426914.2025.2476447

Abstract: ABSTRACT Jet electrochemical milling (JECM) is valued for minimizing material hardness effects, eliminating cutting forces, preventing recasting layers, and achieving high-quality surfaces, making it widely used in industry. While previous studies focus on tool electrodes’… read more here.

Keywords: jecm; sidewall thickness; tool; effect tool ... See more keywords

Comparative analysis of microstructure, electrical and optical performance in sidewall etching process for GaN-based green micro-LED

Sign Up to like & get
recommendations!
Published in 2024 at "Journal of Physics D: Applied Physics"

DOI: 10.1088/1361-6463/ad55f9

Abstract: Micro-LEDs show the size-dependent external quantum efficiency (EQE) reduction problem, mainly owing to increased non-radiative recombination loss at the sidewall for smaller chip size. In this work, the evolution of microstructure, surface potential and optical… read more here.

Keywords: optical performance; micro; sidewall; green micro ... See more keywords

Smooth and Vertical Sidewall Formation for AlGaN-Based Electronic and Optoelectronic Devices

Sign Up to like & get
recommendations!
Published in 2024 at "ECS Journal of Solid State Science and Technology"

DOI: 10.1149/2162-8777/ad6f43

Abstract: We report a two-step etching process involving inductively coupled plasma (ICP) etching followed by wet chemical etching to achieve smooth and vertical sidewalls, being beneficial for AlGaN-based electronic and optoelectronic devices. The influence of ICP… read more here.

Keywords: based electronic; sidewall; electronic optoelectronic; algan based ... See more keywords

Development of planar rigid-elastic coupling tyre model with analytical multi-stiffness sidewall

Sign Up to like & get
recommendations!
Published in 2019 at "Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics"

DOI: 10.1177/1464419318764745

Abstract: In this study, combining the membrane feature with inflation pressure and the structural deformation caused by sidewall curvature, rigid-elastic coupling tyre model with analytical multi-stiffness sidewall is proposed for a heavy-loaded radial tyre with a… read more here.

Keywords: stiffness; sidewall; multi stiffness; tyre ... See more keywords

Investigation and direct observation of sidewall leakage current of InGaN-Based green micro-light-emitting diodes.

Sign Up to like & get
recommendations!
Published in 2022 at "Optics express"

DOI: 10.1364/oe.459877

Abstract: Electrical and optical characteristics of InGaN-based green micro-light-emitting diodes (µLEDs) with different active areas are investigated; results are as follows. Reverse and forward leakage currents of µLED increase as emission area is reduced owing to… read more here.

Keywords: based green; ingan based; light emitting; sidewall ... See more keywords

Controlling the sidewall verticality of a CVD diamond in Gaussian laser grooving.

Sign Up to like & get
recommendations!
Published in 2022 at "Optics express"

DOI: 10.1364/oe.470128

Abstract: For the specific energy distribution of Gaussian laser, the obtained grooves always fall short in the sidewall verticality. To overcome this problem, the improvement of sidewall inclination in laser grooving of a CVD diamond is… read more here.

Keywords: sidewall verticality; gaussian laser; laser; cvd diamond ... See more keywords