Simple, low‐cost fabrication of semi‐circular channel using the surface tension of solder paste and its application to microfluidic valves
Sign Up to like & getrecommendations! Published in 2018 at "ELECTROPHORESIS"
DOI: 10.1002/elps.201800064
Abstract: This work presents a simple, low‐cost method to fabricate semi‐circular channels using solder paste, which can amalgamate the cooper surface to form a half‐cylinder mold using the surface tension of Sn–Pd alloy (the main component… read more here.
Keywords: simple low; solder paste; surface; semi circular ... See more keywords
A simple and low-cost electrochemical immunosensor for ultrasensitive determination of calreticulin biomarker in human serum.
Sign Up to like & getrecommendations! Published in 2022 at "Macromolecular bioscience"
DOI: 10.1002/mabi.202200390
Abstract: An early on time detection of breast cancer significantly affects the treatment process and outcome. Herein, a new label-free impedimetric biosensor is developed to determine the lowest change in the level of calreticulin (CALR), which… read more here.
Keywords: calreticulin; immunosensor; biomarker; calr ... See more keywords
Simple, Low-Cost and Reliable Device for Vacuum-Assisted Headspace Solid-Phase Microextraction of Volatile and Semivolatile Compounds from Complex Solid Samples
Sign Up to like & getrecommendations! Published in 2017 at "Chromatographia"
DOI: 10.1007/s10337-017-3422-z
Abstract: A new simple, low-cost, reliable vacuum-assisted headspace solid-phase microextraction (VA-HS-SPME) device was fabricated and evaluated considering the strengths and weaknesses of previously reported systems. The device can be applied for analysis of solid and liquid… read more here.
Keywords: cost reliable; cost; low cost; vacuum ... See more keywords
Construction of simple and low-cost acceptors for efficient non-fullerene organic solar cells
Sign Up to like & getrecommendations! Published in 2021 at "Organic Electronics"
DOI: 10.1016/j.orgel.2020.106026
Abstract: Abstract The flexibility in structural design of organic semiconductors endows organic solar cells (OSCs) not only great function-tunabilities, but also high potential toward practical application. In this work, four simple and low-cost non-fullerene acceptors with… read more here.
Keywords: organic solar; non fullerene; low cost; simple low ... See more keywords
Simple, Low-Dose, Durable, and Carbon-Nanotube-Based Floating Solar Still for Efficient Desalination and Purification
Sign Up to like & getrecommendations! Published in 2019 at "ACS Sustainable Chemistry & Engineering"
DOI: 10.1021/acssuschemeng.8b05036
Abstract: A simple, low-dose, durable, and carbon nanotube-based floating solar still (CNTs-FSS) has been prepared for seawater desalination based on interfacial solar heating. The CNTs-FSS is composed of a ... read more here.
Keywords: carbon nanotube; simple low; low dose; nanotube based ... See more keywords
Steam condensing flow in cascade turbine blades and nozzles using simple low dissipation upwind scheme
Sign Up to like & getrecommendations! Published in 2025 at "Physics of Fluids"
DOI: 10.1063/5.0263978
Abstract: In various engineering applications, the phase change from steam to water droplet during rapid expansion under supersonic flow conditions is inevitable. The occurrence of condensation waves due to the latent heat released during phase change… read more here.
Keywords: steam; simple low; low dissipation; dissipation ... See more keywords
A Simple, Low-Cost and Efficient Gait Analyzer for Wearable Healthcare Applications
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Sensors Journal"
DOI: 10.1109/jsen.2018.2885207
Abstract: The aging population is projected to rise significantly due to continuous improvements in healthcare, personal and environmental hygiene, nutrition, and education. This large aging demographic may cause adverse socio-economic impacts in terms of the costs… read more here.
Keywords: low cost; simple low; gait; gait analyzer ... See more keywords
Simple and Low-Cost Dual-Band Printed Microwave Absorber for 2.4- and 5-GHz-Band Applications
Sign Up to like & getrecommendations! Published in 2017 at "Frequenz"
DOI: 10.1515/freq-2016-0252
Abstract: Abstract In this research, a dual-band thin printed-circuit-board (PCB) microwave absorber has been proposed for applications in 2.4 and 5 GHz frequency bands. Each unit cell of the absorber consists of a square ring and a… read more here.
Keywords: cost dual; dual band; band; microwave absorber ... See more keywords
A simple, low-cost 3D printed adaptor for endoillumination in intraocular surgery.
Sign Up to like & getrecommendations! Published in 2022 at "International journal of ophthalmology"
DOI: 10.18240/ijo.2022.07.24
Abstract: Joint Shantou International Eye Center, Shantou University and the Chinese University of Hong Kong, Shantou 515041, Guangdong Province, China Co-first authors: Xu-Long Liao and Pei-Min Lin Correspondence to: Hao-Yu Chen. Joint Shantou International Eye Center,… read more here.
Keywords: university; printed adaptor; low cost; simple low ... See more keywords