Molecular dynamics simulation and experimental study of the bonding properties of polymer binders in 3D powder printed hydroxyapatite bioceramic bone scaffolds
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.07.082
Abstract: Abstract Binder properties are a key factor affecting the quality of bone scaffolds produced using 3D powder printing. In this research, molecular dynamics simulation (MD) and experimental methods were applied to study the cohesive energy… read more here.
Keywords: molecular dynamics; bone scaffolds; polymer binders; simulation experimental ... See more keywords
Numerical simulation and experimental investigation on tribological performance of micro-dimples textured surface under hydrodynamic lubrication
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Mechanical Sciences"
DOI: 10.1016/j.ijmecsci.2019.105095
Abstract: Abstract Aiming at establishing an effective and efficient optimization method of texture parameters to further enhance the tribological performance of mechanical equipment, numerical simulation and experimental studies were undertaken to assess the tribological performance of… read more here.
Keywords: textured surface; numerical simulation; tribological performance; simulation experimental ... See more keywords
Numerical simulation and experimental validation of electromagnetic properties for Al-MWCNT-Fe2O3 hybrid nano-composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.10.010
Abstract: Abstract In this paper, an attempt was made to simulate the electromagnetic properties of various combinations of aluminum - multiwalled carbon nanotube - ferric oxide hybrid composite. The properties such as the magnetic flux density,… read more here.
Keywords: numerical simulation; validation electromagnetic; experimental validation; electromagnetic properties ... See more keywords
Numerical simulation and experimental investigation of tailored hot stamping of boron steel by partial heating
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.07.025
Abstract: Abstract For the purpose of manufacturing the automotive body structure parts with tailored properties, the hot stamping process with partial heating was experimentally and numerically investigated. In this study, the deformation behaviors of the steel… read more here.
Keywords: steel; partial heating; simulation experimental; hot stamping ... See more keywords
Simulation and experimental study of FBG-based magnetic field sensors with Terfenol-D composites in different geometric shapes
Sign Up to like & getrecommendations! Published in 2021 at "Measurement"
DOI: 10.1016/j.measurement.2020.108893
Abstract: Abstract In this paper, we report a study on optical sensors based on fiber Bragg gratings (FBG) and magnetostrictive composites of Terfenol–D applied to magnetic field measurement. The study consisted in determining the sensor's sensitivity… read more here.
Keywords: experimental study; field; simulation experimental; sensitivity ... See more keywords
Silicon distribution in SAPO-11 molecular sieves: Simulation and experimental adsorption study
Sign Up to like & getrecommendations! Published in 2020 at "Microporous and Mesoporous Materials"
DOI: 10.1016/j.micromeso.2019.109906
Abstract: Abstract A method for investigation of the Si distribution in the SAPO-11 structure based on the aggregate of simulation and experimental adsorption methods is suggested. Twelve possible configurations of the silicon location in the SAPO-11… read more here.
Keywords: adsorption; sapo; experimental adsorption; distribution sapo ... See more keywords
Virtual Simulation and Experimental Verification for 3D-printed Robot Manipulators
Sign Up to like & getrecommendations! Published in 2020 at "Robotica"
DOI: 10.1017/s0263574720000417
Abstract: SUMMARY The objective of this work is to construct a robot that is based on 3D printing to meet the low-cost and light structures. The Computer-aided-design model is used with LabVIEW to simulate the given… read more here.
Keywords: printed robot; verification printed; experimental verification; robot manipulators ... See more keywords
Simulation and experimental illustration of vibration at load rejection in a continuously overloaded large hydrogenerator
Sign Up to like & getrecommendations! Published in 2020 at "Iet Renewable Power Generation"
DOI: 10.1049/iet-rpg.2019.0847
Abstract: Large hydro generators are usually overloaded at various situations such as the period when excess water is available and when excess inflow is to be discharged. The period may have extended to many weeks under… read more here.
Keywords: load rejection; vibration; experimental illustration; simulation experimental ... See more keywords
Simulation and Experimental Study of a Synthetic Jet Valveless Pump
Sign Up to like & getrecommendations! Published in 2020 at "IEEE/ASME Transactions on Mechatronics"
DOI: 10.1109/tmech.2019.2960332
Abstract: A valveless microfluidic pump using a lead zirconate titanate (PZT) diaphragm actuated synthetic jet is developed and fabricated. For this present design, a valveless pump structure is developed in which the pump chamber is sealed… read more here.
Keywords: synthetic jet; valveless pump; simulation experimental; pump ... See more keywords
Simulation and experimental investigation of cross-phase modulation effect on 5G fronthaul wavelengths
Sign Up to like & getrecommendations! Published in 2021 at "Optical Engineering"
DOI: 10.1117/1.oe.60.4.046105
Abstract: Abstract. Dense wavelength-division multiplexing is conceived as an appropriate solution for the 5G fronthaul system to cope with the rapidly increasing demand for bandwidth. While the cross-phase modulation (XPM) would appear when the signals are… read more here.
Keywords: fronthaul wavelengths; cross phase; phase modulation; effect fronthaul ... See more keywords
Simulation and Experimental Investigation of Pulsed Eddy Current Technique for Defect Evaluation
Sign Up to like & getrecommendations! Published in 2018 at "Indonesian Journal of Electrical Engineering and Informatics"
DOI: 10.11591/ijeei.v6i3.503
Abstract: Pulsed eddy current (PEC) is an advanced Non-Destructive Testing (NDT) technique that uses transient waveform for their coil excitation. It has the advantage of gathering different depth information in a single excitation process, thus provide… read more here.
Keywords: technique; evaluation; eddy current; simulation ... See more keywords