Sintering process simulation of a solid oxide fuel cell anode and its predicted thermophysical properties
Sign Up to like & getrecommendations! Published in 2017 at "Applied Thermal Engineering"
DOI: 10.1016/j.applthermaleng.2017.06.061
Abstract: Abstract Complex porous structure and properties of a solid oxide fuel cell (SOFC) anode significantly affect the SOFC performance. In this study, the sintering process of the typical NiO-YSZ anode is simulated by a coarse-grained… read more here.
Keywords: anode; solid oxide; oxide fuel; sintering process ... See more keywords
Fabrication of double-decker zircon aggregates by granulation and influence of TiO2 on the sintering process
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.10.053
Abstract: Abstract In this study, four zircon granules are prepared by using granulation method and using TiO2 and sodium carboxymethyl cellulose (CMC) as a sintering additive and binder, respectively. Then, the effects of TiO2 addition on… read more here.
Keywords: tio2; fabrication double; zircon; pore size ... See more keywords
Influence of sintering process and interfacial bonding mechanism on the mechanical properties of MgO–C refractories
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.03.263
Abstract: Abstract Two kinds of MgO–C refractories were separately prepared by carbon-embedded method and high-temperature nitridation. The phase compositions, microstructures and physical properties of heat-treated samples were investigated. Specially, the relationship between interface bonding and physical… read more here.
Keywords: influence sintering; process interfacial; mgo refractories; mechanical properties ... See more keywords
Microstructural evolution and phase transition mechanism of Ti(C,N)-based cermets during vacuum sintering process
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.11.155
Abstract: Abstract Ti(C,N)-based cermets were fabricated using section vacuum sintering. The density and shrinkage ratio of sintered samples were recorded and analyzed. Phase transition, microstructure and interface behaviors of cermets were examined by transmission electron microscope,… read more here.
Keywords: phase transition; phase; sintering process; core ... See more keywords
Phase microstructure and morphology evolution of MgO-PSZ ceramics during the microwave sintering process
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.02.159
Abstract: Abstract In the present study, controllable microwave sintering was applied to prepare partially stabilised zirconia ceramics with enhanced phase composition and a more uniform structure. To reveal the phase interface properties and structural changes of… read more here.
Keywords: mgo psz; sintering process; ceramics microwave; psz ceramics ... See more keywords
Influence of Li2MoO4 and polytetrafluoroethylene addition on the cold sintering process and dielectric properties of BaBiLiTeO6 ceramics
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.07.255
Abstract: Abstract Composites of BaBiLiTeO6 (BBLTO) - Li2MoO4 (LMO) and BaBiLiTeO6 - polytetrafluoroethylene (PTFE) were fabricated using cold sintering process and their microwave dielectric properties were investigated for the first time. Phase purity and reactivity of… read more here.
Keywords: sintering process; dielectric; dielectric properties; cold sintering ... See more keywords
Trends in air pollutant emissions from the sintering process of the iron and steel industry in the Fenwei Plain and surrounding regions in China, 2014-2017.
Sign Up to like & getrecommendations! Published in 2021 at "Chemosphere"
DOI: 10.1016/j.chemosphere.2021.132917
Abstract: China is the largest iron and steel producer and consumer in the world. The iron and steel manufacture, especially the sintering process, is energy-intensive, and contributes substantially to air pollutant emissions in China. Compared with… read more here.
Keywords: iron steel; sintering process; air pollutant; emission ... See more keywords
Synergistic outstanding strengthening behavior of graphene/copper nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107235
Abstract: Abstract Graphene reinforced copper matrix (graphene/Cu) nanocomposite powders are fabricated by the molecular-level mixing process and consolidated by spark plasma sintering and pressureless sintering process followed by hot isostatic pressing for the full densification. The… read more here.
Keywords: graphene; graphene matrix; sintering process; copper ... See more keywords
Hybrid Prediction Model of Carbon Efficiency for Sintering Process
Sign Up to like & getrecommendations! Published in 2017 at "IFAC-PapersOnLine"
DOI: 10.1016/j.ifacol.2017.08.1282
Abstract: Abstract Sintering process is the second most energy-consuming process in ironmarking. The main source of energy consumption is the consumption of carbon. It is significant to predict the carbon efficiency to reduce the energy consumption.… read more here.
Keywords: model; carbon efficiency; carbon; sintering process ... See more keywords
Improved dielectric and piezoelectric properties of K/Na excessed (Na,K)NbO3 lead-free ceramics by the two step sintering process
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.12.267
Abstract: Abstract The Na 0.5 K 0.5 NbO 3 (NKN) ceramics with K/Na excess dopants were prepared by employing the two-step sintering process. The K/Na excessed NKN ceramics were researched by varying the sintering temperature, in… read more here.
Keywords: piezoelectric properties; sintering process; step sintering; two step ... See more keywords
Modeling and evaluation of sintered microstructure and its properties for rSOFC fuel electrodes by coarse-grained molecular dynamics
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.161977
Abstract: Abstract Degradation is one of the major issues affecting rSOFC (reversible solid oxide fuel cell) performance in both fuel cell and electrolysis mode operation. Defect and even damage appeared on electrode microstructure may be associated… read more here.
Keywords: fuel electrodes; molecular dynamics; rsofc fuel; fuel ... See more keywords