The effect of sintering temperature and time on the growth of single crystals of 0.75 (Na0.5Bi0.5)TiO3–0.25 SrTiO3 by solid state crystal growth
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Electroceramics"
DOI: 10.1007/s10832-018-0111-8
Abstract: Materials in the (Na0.5Bi0.5)TiO3–SrTiO3 system are of interest for use as lead-free piezoelectric actuators due to high electric-field induced strains. Piezoelectric properties may be further improved by growing single crystals but as yet work on… read more here.
Keywords: crystal growth; seed; sintering temperature; single crystals ... See more keywords
Sintering effect on varistor properties and degradation behavior of ZVMB varistor ceramics
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-7632-9
Abstract: ZnO–V2O5–Mn3O4–Bi2O3 (ZVMB) varistor ceramics were sintered at a low temperature range of 800–875 °C, and the microstructure, electrical properties, dielectric characteristics, and DC-accelerated aging behavior were systematically investigated. Analysis of the microstructure indicated that the average… read more here.
Keywords: zvmb varistor; varistor ceramics; sintering temperature; varistor ... See more keywords
Low-temperature fabrication for transparency Mg doping Li7La3Zr2O12 solid state electrolyte
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8062-4
Abstract: Li7La3Zr2O12 (LLZO), which is one of the most promising solid electrolytes, has received great attention toward development of all solid-state lithium ion batteries in recently years due to its high lithium ion conductivity and relative… read more here.
Keywords: solid state; temperature; sintering temperature; lithium ... See more keywords
Effect of sintering temperature on the photoluminescence properties of red-emitting color conversion glass
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8115-8
Abstract: The red-emitting color conversion glasses were prepared by cosintering borosilicate glass frits and CaAlSiN3:Eu2+ phosphors at various temperatures in the 600–800 °C range. The effect of sintering temperature on the photoluminescence (PL) and excitation (PLE) of… read more here.
Keywords: color conversion; glass; sintering temperature;
Role of sintering temperature on microstructure and nonlinear electrical properties of 0.1 mol.% Nb2O5 added ZnO–V2O5 varistor ceramics
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-00857-5
Abstract: The effect of sintering temperature on the microstructure, density and nonlinear electrical properties of 0.1 mol% Nb2O5 added ZnO–V2O5 varistor ceramics had been investigated. Density measurement, scanning electron microscopy (SEM), X-ray diffraction (XRD) pattern analysis characterized… read more here.
Keywords: properties mol; temperature microstructure; sintering temperature; nonlinear electrical ... See more keywords
Preparation and characterization of Zn-modified CaBi4Ti4O15 piezoelectric ceramics with lower sintering temperature
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-03415-6
Abstract: The Ca0.85(LiCe)0.075Bi4Ti4−xZnxO15 ceramics are prepared via solid‐state reaction method with lower sintering temperature. The influence of lower sintering temperatures (Ts) on structural and electrical properties is investigated. The repressed volatilization of Bi3+ reduces the impurity… read more here.
Keywords: modified cabi4ti4o15; temperature; sintering temperature; lower sintering ... See more keywords
Enhanced electrical properties of lead-free (Ba1−xCax)(Ti0.94Zr0.01Sn0.05)O3 piezoelectric ceramics by optimizing phase ratio and sintering temperature
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-020-04681-0
Abstract: It is challenging for material chemists to develop lead-free ceramics due to the toxicity of lead for human health and environment. (Ba, Ca)(Ti, Zr)O3 and (Ba, Ca)(Ti, Sn)O3 lead-free piezoelectric ceramics have attracted much attention… read more here.
Keywords: phase; lead free; sintering temperature; piezoelectric ceramics ... See more keywords
Influence of sintering parameters on structural, dielectric and piezoelectric properties of Ca, La and Sr-doped PZT (PCLSZT) electroceramics
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-021-06354-y
Abstract: The effects of both sintering temperature and soaking time on structural, dielectric and piezoelectric properties of CaCO3-doped lead lanthanum strontium zirconia titanate (PLSZT) system have been studied. CaCO3 was mixed with PLSZT according to stoichiometric… read more here.
Keywords: structural dielectric; temperature; piezoelectric properties; sintering temperature ... See more keywords
Effect of Sintering Temperature on the Superconductivity of Bi2Se3/FeSe0.5Te0.5Composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Superconductivity and Novel Magnetism"
DOI: 10.1007/s10948-020-05425-1
Abstract: As a promising topological superconductor, Fe(Se0.5Te0.5) recently attracts interest from researchers, while Bi2Se3 has been considered one of the most important topological insulator materials. Therefore the Bi2Se3/FeSe0.5Te0.5 bulk composite could be interesting in demonstrating novel… read more here.
Keywords: temperature; effect sintering; sintering temperature; fese0 5te0 ... See more keywords
Modifications in structural, optical and electrical properties of nanocrystalline CdO: role of sintering temperature
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-018-4876-7
Abstract: AbstractPresent report deals with the synthesis of nanocrystalline cadmium oxide (CdO) using low-cost acetate precursor based modified sol–gel technique. Final product was sintered at different temperatures and studied for their structural, optical and electrical properties.… read more here.
Keywords: structural optical; nanocrystalline cdo; temperature; sintering temperature ... See more keywords
Effects of sintering temperature on mechanical properties of alumina fiber reinforced alumina matrix composites
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Sol-Gel Science and Technology"
DOI: 10.1007/s10971-019-05192-z
Abstract: In this study, the continuous alumina fibers reinforced alumina matrix (Al 2 O 3 /Al 2 O 3 ) composites were fabricated through sol–gel method at a sintering temperature range of 900–1400 °C, and their mechanical… read more here.
Keywords: reinforced alumina; temperature; sintering temperature; alumina matrix ... See more keywords