Finite element simulation of a highly sensitive SH-SAW delay line sensor with SiO$$_{2}$$2 micro-ridges
Sign Up to like & getrecommendations! Published in 2018 at "Microsystem Technologies"
DOI: 10.1007/s00542-018-3772-y
Abstract: The paper presents 3D finite element simulation of an SH-SAW delay line sensor to investigate coupled resonance with SiO$$_{2}$$2 micro-ridges designed along the wave propagation direction on a 36$$^{\circ }$$∘-YX LiTaO$$_{3}$$3 substrate. Time response simulation is… read more here.
Keywords: finite element; element simulation; mass; micro ... See more keywords
Single-walled carbon nanotube as conductive additive for SiO/C composite electrodes in pouch-type lithium-ion batteries
Sign Up to like & getrecommendations! Published in 2019 at "Ionics"
DOI: 10.1007/s11581-019-03391-w
Abstract: SiO/C is believed to be one of the most promising anode material for lithium-ion batteries due to the low operation potential and superior theoretical capacity. However, the substantial volume change during cycling process limits its… read more here.
Keywords: swcnt; ion; ion batteries; sio ... See more keywords
Effects of the Emulsion Composition on the Physical Properties and Oxidative Stability of Sacha Inchi (Plukenetia volubilis L.) Oil Microcapsules Produced by Spray Drying
Sign Up to like & getrecommendations! Published in 2017 at "Food and Bioprocess Technology"
DOI: 10.1007/s11947-017-1906-3
Abstract: Sacha Inchi (Plukenetia volubilis L.) oil (SIO) is one of the vegetable oils with the highest content of polyunsaturated fatty acids (about 50% α-linolenic acid, and 35% linoleic acid), thus being prone to oxidation. The… read more here.
Keywords: sacha inchi; spray drying; physical properties; sio ... See more keywords
Sonar inspired optimization (SIO) in engineering applications
Sign Up to like & getrecommendations! Published in 2020 at "Evolving Systems"
DOI: 10.1007/s12530-018-9250-z
Abstract: Recently, a new Nature Inspired Intelligent scheme has been proposed and presented, named Sonar Inspired Optimization (SIO). This algorithm is inspired by the SONAR mechanism, which is used by Warships to detect targets and avoid… read more here.
Keywords: engineering applications; inspired optimization; sio; optimization sio ... See more keywords
Bimetallic oriented catalytic fast pyrolysis of lignin research based on PY-GC/MS
Sign Up to like & getrecommendations! Published in 2019 at "Biomass Conversion and Biorefinery"
DOI: 10.1007/s13399-019-00464-8
Abstract: In this work, catalytic pyrolysis of alkaline lignin over mono- (Fe-Al 2 O 3 -SiO 2 and Mo-Al 2 O 3 -SiO 2 ) and due-metal (Fe-Mo-Al 2 O 3 -SiO 2 ) was studied.… read more here.
Keywords: lignin; pyrolysis; sio; catalytic fast ... See more keywords
Hydrodeoxygenation of lignin-derived phenoic compounds to hydrocarbon fuel over supported Ni-based catalysts
Sign Up to like & getrecommendations! Published in 2017 at "Applied Energy"
DOI: 10.1016/j.apenergy.2017.08.078
Abstract: Abstract Ni-based catalysts supported on γ-Al 2 O 3 and SiO 2 were prepared by impregnation. Catalyst characterization was performed using XRD, NH 3 -TPD, H 2 -TPR and chemisorption. Effects of supports on catalytic… read more here.
Keywords: sio; reaction; phenolic compounds; based catalysts ... See more keywords
Studies of the confinement at laser-induced backside dry etching using infrared nanosecond laser pulses
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.08.099
Abstract: Abstract In the present study, laser-induced backside etching of SiO 2 at an interface to an organic material using laser pulses with a wavelength of λ = 1064 nm and a pulse length of τ = 7 ns have been performed… read more here.
Keywords: induced backside; laser; surface; laser pulses ... See more keywords
Multi-channel and porous SiO@N-doped C rods as anodes for high-performance lithium-ion batteries
Sign Up to like & getrecommendations! Published in 2018 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.12.184
Abstract: Abstract To improve the cycling stability and rate capability of SiO electrodes, multi-channel and porous SiO@N-doped C (mp-SiO@N-doped C) rods are fabricated by the combination of electrospinning and heat treatment with the assistance of poly(methyl… read more here.
Keywords: doped rods; multi channel; channel porous; sio ... See more keywords
Core/shell structured sSiO2/mSiO2 composite particles: The effect of the core size on oxide chemical mechanical polishing
Sign Up to like & getrecommendations! Published in 2018 at "Advanced Powder Technology"
DOI: 10.1016/j.apt.2017.09.020
Abstract: Abstract In a typical chemical mechanical polishing (CMP) process, the type, morphology, structure, mechanical, and surface characteristics of abrasive particles play an important role in influencing the material removal process. The novel abrasive particles with… read more here.
Keywords: microscopy; core size; composite particles; shell ... See more keywords
Scalable synthesis of the lithium silicate-based high-temperature CO2 sorbent from inexpensive raw material vermiculite
Sign Up to like & getrecommendations! Published in 2018 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2018.05.113
Abstract: Abstract A novel Li 4 SiO 4 -based high-temperature CO 2 sorbent was prepared directly from the expanded vermiculite (EXVMT) for the first time. Due to the separating effect by the existing impurity phases in… read more here.
Keywords: based high; sorbent; high temperature; sorption ... See more keywords
Sol-gel process and high-temperature property of SiO2/ZrO2-SiO2 composites
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2016.10.020
Abstract: Abstract SiO 2 /ZrO 2 -SiO 2 composites were fabricated by the sol-gel process, and their high-temperature flexural properties were explored. The oxidation behavior at 1200 °C and 1500 °C was also investigated. At high temperature, the… read more here.
Keywords: sio2; high temperature; gel process; sio ... See more keywords