In Situ Formation of Bismuth‐Based Perovskite Heterostructures for High‐Performance Cocatalyst‐Free Photocatalytic Hydrogen Evolution
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202006919
Abstract: Solar‐to‐fuel conversion with organic–inorganic hybrid halide perovskites has attracted growing attention as a result of their excellent optoelectronic properties as well as the low temperature of the solution based fabrication process. However, the most comprehensively… read more here.
Keywords: bismuth based; hydrogen; formation bismuth; situ formation ... See more keywords
Long‐Life Lithium‐Metal All‐Solid‐State Batteries and Stable Li Plating Enabled by In Situ Formation of Li3PS4 in the SEI Layer
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Materials"
DOI: 10.1002/adma.202203281
Abstract: An ultrastable and kinetically favorable interface is constructed between sulfide–poly(ethylene oxide) (PEO) composite solid electrolytes (CSEs) and lithium metal, via in situ formation of a solid electrolyte interphase (SEI) layer containing Li3PS4. A specially designed… read more here.
Keywords: situ formation; sei layer; layer; lithium metal ... See more keywords
Facile in situ formation of high conductive Ag and CuxOy composite films: a role of aqueous spray combustion
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-00565-6
Abstract: In the present contribution, in situ formation of low-temperature high conductive composite films composed of pure silver and oxides of copper (CuxOy where, x = y = 1 for CuO and x = 2, y = 1 for Cu2O), are presented through spray… read more here.
Keywords: cuxoy; spray combustion; combustion; situ formation ... See more keywords
(Sb2O3/Sb2O5)-doped SnO2–Co3O4–Cr2O3 varistors: The Sb2O4 in-situ formation and its influence over the electrical and microstructural properties
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.08.120
Abstract: Abstract The present study aimed to systematically study the transitions and consequential effects of antimony oxide (Sb2O3 or Sb2O5) additions over the properties of a SnO2-based varistor system. High energy ball-milling and conventional sintering were… read more here.
Keywords: situ formation; co3o4 cr2o3; sb2o5; sb2o3 sb2o5 ... See more keywords
Superlubricity achieved with TiN coatings via the in situ formation of a carbon-based film at the sliding interfaces
Sign Up to like & getrecommendations! Published in 2021 at "Ceramics International"
DOI: 10.1016/j.ceramint.2021.08.229
Abstract: Abstract This work aimed to develop an efficient lubricant for physical vapor-deposited TiN coatings on steel by adding cyclopropane-carboxylic acid (CPCa) to PAO4 base oil to enhance boundary lubrication. Results showed that an ultralow coefficient… read more here.
Keywords: carbon based; situ formation; tin coatings; formation carbon ... See more keywords
In situ formation of low interstitials Ti-TiC composites by gas-solid reaction
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.07.344
Abstract: Abstract In this work, in situ formation of low interstitials Ti-TiC composites with a high relative density has been fabricated by the combination of TiH2-CH4 reaction and vacuum pressure-less sintering. During the gas-solid reaction, TiH2… read more here.
Keywords: tic composites; situ formation; formation low; low interstitials ... See more keywords
In situ formation of surface sulfide species and its role in enhancing the photocatalytic and photoelectrochemical properties of wide bandgap ZrO2
Sign Up to like & getrecommendations! Published in 2017 at "Molecular Catalysis"
DOI: 10.1016/j.mcat.2017.03.031
Abstract: Abstract Development of visible light active photocatalysts for hydrogen generation from water is important for the effective utilization of solar energy. In this paper, we demonstrate visible light photocatalytic activity (>410 nm) for wide bandgap ZrO2… read more here.
Keywords: formation surface; bandgap zro2; situ formation; wide bandgap ... See more keywords
In situ formation of Ag/Au nanorods as a platform to design a non-aggregation colorimetric assay for uric acid detection in biological fluids
Sign Up to like & getrecommendations! Published in 2020 at "Microchemical Journal"
DOI: 10.1016/j.microc.2020.104642
Abstract: Abstract Herein, we report on a sensitive probe for colorimetric detection of uric acid based on the formation of Ag shell on Au nanorods (Ag/AuNRs) in the presence of uric acid. Uric acid can reduce… read more here.
Keywords: acid detection; uric acid; acid; situ formation ... See more keywords
In Situ Formation of Li2SiO3-Li-NaCl Interface on Si and Its Effect on Hydrogen Evolution.
Sign Up to like & getrecommendations! Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c23285
Abstract: Silicon has emerged as a competitive candidate for hydrolytic hydrogen production due to its high theoretical hydrogen yield, low cost, and on-demand availability. However, the hydrolysis reaction is extremely restrained by passivated SiO2, including the… read more here.
Keywords: situ formation; hydrogen production; li2sio3 nacl; hydrogen ... See more keywords
Conductive and Tough Hydrogels Based on Biopolymer Molecular Templates for Controlling in Situ Formation of Polypyrrole Nanorods.
Sign Up to like & getrecommendations! Published in 2018 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.8b10280
Abstract: Conductive hydrogels (CHs) have gained significant attention for their wide applications in biomedical engineering owing to their structural similarity to soft tissues. However, designing CHs that combine biocompatibility with good mechanical and electrical properties is… read more here.
Keywords: biopolymer molecular; templates controlling; situ formation; hydrogel ... See more keywords
In Situ Formation of a Stable Interface in Solid-State Batteries
Sign Up to like & getrecommendations! Published in 2019 at "ACS Energy Letters"
DOI: 10.1021/acsenergylett.9b00857
Abstract: Solid polymer electrolytes (SPEs) are considered as promising candidates for solid-state batteries. SPEs with a conventional solution casting technique have serious side reactions during charging b... read more here.
Keywords: state batteries; formation stable; situ formation; stable interface ... See more keywords