Electronically Conductive Hydrogels by in Situ Polymerization of a Water‐Soluble EDOT‐Derived Monomer
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202200280
Abstract: Electronically conductive hydrogels have gained popularity in bioelectronic interfaces because their mechanical properties are similar to biological tissues, potentially preventing scaring in implanted electronics. Hydrogels have low elastic moduli, due to their high water content,… read more here.
Keywords: situ polymerization; polymerization water; electronically conductive; conductive hydrogels ... See more keywords
LiDFOB Initiated In Situ Polymerization of Novel Eutectic Solution Enables Room‐Temperature Solid Lithium Metal Batteries
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Science"
DOI: 10.1002/advs.202003370
Abstract: Abstract It is demonstrated that a novel eutectic solution including 1,3,5‐trioxane (TXE) and succinonitrile (SN) can be converted into solid‐state polymer electrolyte (SPE) via in situ polymerization triggered by lithium difluoro(oxalato)borate (LiDFOB). It is worth… read more here.
Keywords: metal; situ polymerization; metal batteries; room temperature ... See more keywords
Unsaturated polyester/montmorillonite nanocomposites with improved mechanical and thermal properties fabricated by in situ polymerization
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45251
Abstract: Although organically modified montmorillonite (OMMT) has been incorporated into unsaturated polyester (UP) resin to enhance properties, the aggregation often leads to defects which directly affect the properties of nanocomposites. In this work, OMMT slurry modified… read more here.
Keywords: thermal properties; nanocomposites improved; situ polymerization; unsaturated polyester ... See more keywords
Preparation and characterization of graphene reinforced PA6 fiber
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45834
Abstract: Here, we report the successful preparation of PA6/GO composite fibers through in situ polymerization and the melting spinning method. The results suggest that graphene has induced only minor changes on the relative viscosity yet exhibits… read more here.
Keywords: graphene oxide; graphene; pa6 graphene; situ polymerization ... See more keywords
Synthesis of graphene oxide–epoxy resin encapsulated urea–formaldehyde microcapsule by in situ polymerization process
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Composites"
DOI: 10.1002/pc.23979
Abstract: A new type of microcapsule has been prepared with urea–formaldehyde (UF) as shell material and graphene oxide (GO)–epoxy resin with acetone as standard solvent between them as the core material. In situ polymerization procedure was… read more here.
Keywords: graphene oxide; urea formaldehyde; epoxy resin; oxide epoxy ... See more keywords
Morphological Transformation and In Situ Polymerization of Caspase-3 Responsive Diacetylene-Containing Lipidated Peptide Amphiphile for Self-Amplified Cooperative Antitumor Therapy.
Sign Up to like & getrecommendations! Published in 2022 at "Small"
DOI: 10.1002/smll.202204759
Abstract: In order to artificially regulate cell behaviors, intracellular polymerization as an emerging chemical technique has attracted much attention. Yet, it is still a challenge to achieve effective intracellular polymerization to conquer tumors in the complex… read more here.
Keywords: self amplified; situ polymerization; caspase; transformation ... See more keywords
Fabrication of ultrastiff and strong hydrogels by in situ polymerization in layered cellulose nanofibers
Sign Up to like & getrecommendations! Published in 2019 at "Cellulose"
DOI: 10.1007/s10570-019-02822-1
Abstract: Integrating high stiffness, strength, and toughness on par with those of soft tissues into synthetic hydrogels is extremely challenging. We have proposed a method to overcome this problem: in situ polymerization of a polymer matrix… read more here.
Keywords: cellulose nanofibers; situ polymerization; layered cellulose; fabrication ultrastiff ... See more keywords
In-situ polymerization of polyurethane/aniline oligomer functionalized graphene oxide composite coatings with enhanced mechanical, tribological and corrosion protection properties
Sign Up to like & getrecommendations! Published in 2021 at "Chemical Engineering Journal"
DOI: 10.1016/j.cej.2021.130006
Abstract: Abstract Aniline oligomer-functionalized graphene oxide (AOFG) and reduced graphene oxide (AOFrG) were prepared via a liquid-phase chemical modification route and incorporated into the polyurethane (PU) by an in-situ polymerization to obtain both wear-resistant and anticorrosive… read more here.
Keywords: aniline oligomer; oligomer functionalized; graphene oxide; functionalized graphene ... See more keywords
Fabrication of polymethyl methacrylate composites with silanized boron nitride by in-situ polymerization for high thermal conductivity
Sign Up to like & getrecommendations! Published in 2019 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.01.021
Abstract: Abstract Heat management is considered to be a critical issue for the efficient integration of electronic devices, and the demand for materials with high thermal conductivity is increasing. Therefore, various thermally conductive fillers have been… read more here.
Keywords: high thermal; boron nitride; thermal conductivity; polymethyl methacrylate ... See more keywords
Biobased thermoplastic elastomer with seamless 3D-Printability and superior mechanical properties empowered by in-situ polymerization in the presence of nanocellulose
Sign Up to like & getrecommendations! Published in 2020 at "Composites Science and Technology"
DOI: 10.1016/j.compscitech.2019.107885
Abstract: Abstract A biobased and biocompatible thermoplastic elastomer (TPE) with superior 3D printability was demonstrated with great potential for customized manufacturing technologies and fabrication of biointegrated devices. The inherent structural and stereochemical disadvantages of biobased monomers,… read more here.
Keywords: printability; situ polymerization; polymerization presence; thermoplastic elastomer ... See more keywords
Reversible photochromic energy storage polyurea microcapsules via in-situ polymerization
Sign Up to like & getrecommendations! Published in 2020 at "Energy"
DOI: 10.1016/j.energy.2020.119630
Abstract: Abstract In this study, reversible photochromic polyurea (PU) microcapsules had been innovatively designed and prepared by in-situ polymerization successfully, which exhibited good latent heat storage and release properties. For the microcapsules, butyl stearate containing photochromic… read more here.
Keywords: storage; reversible photochromic; energy storage; polyurea microcapsules ... See more keywords