SLA-Printed BaTiO3–Reinforced Bio-Nanocomposites: Influence of Printing Parameters on Mechanical, Dielectric, and Thermal Properties
Sign Up to like & getrecommendations! Published in 2025 at "ACS Omega"
DOI: 10.1021/acsomega.5c08292
Abstract: The development of biocompatible nanocomposites with enhanced dielectric behavior has gained significant importance in medical electronics, particularly for high-frequency applications. This study presents the fabrication of barium titanate (BaTiO3)-reinforced nanocomposites using a photopolymer bioresin and… read more here.
Keywords: printed batio3; reinforced bio; batio3; batio3 reinforced ... See more keywords
SLA-Printed 3-D Waveguide Paths for E-Band Using Electroless Silver Plating
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Components, Packaging and Manufacturing Technology"
DOI: 10.1109/tcpmt.2019.2927671
Abstract: This paper proposes a fabrication approach for 3-D printed waveguide paths based on a combination of an optimized electroless silver plating process with a waveguide-specific design rule for general metal plating by introducing large-scale non-radiating… read more here.
Keywords: waveguide paths; sla printed; printed waveguide; electroless silver ... See more keywords
Enhancing stiffness and strength in SLA-printed photopolymer composites through UV post-curing and thermal annealing
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Reinforced Plastics and Composites"
DOI: 10.1177/07316844251372320
Abstract: This study examines the influence of printing parameters and post-processing on the mechanical performance of SLA-printed acrylate-based materials. Specimens were fabricated at two printing speeds (100 mm/s, 130 mm/s) and three layer thicknesses (0.05–0.15 mm), followed by UV… read more here.
Keywords: thermal annealing; curing thermal; post curing; sla printed ... See more keywords
Characterization and Comparative Analysis of Mechanical Parameters of FDM- and SLA-Printed ABS Materials
Sign Up to like & getrecommendations! Published in 2024 at "Applied Sciences"
DOI: 10.3390/app14020649
Abstract: This research paper provides an in-depth examination of the mechanical characteristics of 3D-printed specimens made from acrylonitrile butadiene styrene (ABS) and resins akin to ABS, with a focus on two widely used 3D printing methodologies:… read more here.
Keywords: sla printed; printed specimens; infill density; density ... See more keywords
Identification of the Influence of IPA Rinsing Times on Surface Roughness of SLA-Printed Parts Made of Different Materials
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18092082
Abstract: This study investigates the influence of isopropyl alcohol (IPA) washing time on the surface roughness of stereolithography (SLA)-printed parts fabricated using the Formlabs Form 3B+ printer. Three photopolymer resins provided by the manufacturer were evaluated:… read more here.
Keywords: surface roughness; influence; surface; sla printed ... See more keywords
Effects of Cement Shade, Cementation, and Thermocycling on the Color Parameters and the Final Color of the SLA-Printed Photopolymer Resins
Sign Up to like & getrecommendations! Published in 2025 at "Polymers"
DOI: 10.3390/polym17233127
Abstract: This study investigated the effects of resin cement shade and thermocycling on the color parameters and final appearance of SLA-printed photopolymer resins. Specimens with a thickness of 1 mm were fabricated and categorized into eight… read more here.
Keywords: thermocycling color; cement shade; sla printed; color ... See more keywords
Characterization of SLA-printed ceramic composites for dental restorations
Sign Up to like & getrecommendations! Published in 2024 at "Lithuanian Journal of Physics"
DOI: 10.3952/physics.2024.64.3.5
Abstract: This study introduces a novel ceramic-composite resin specifically developed for stereolithography (SLA) 3D printing, aimed at enhancing dental restorations. The integration of advanced digital technologies in dentistry has shifted traditional methods towards more precise and… read more here.
Keywords: ceramic composite; characterization sla; composite resin; sla printed ... See more keywords