Tribological Performance of Molybdenum Stellite Alloys under Dry-Sliding Wear
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04650-y
Abstract: Elements tungsten and molybdenum are the key constituents of Stellite alloys as solutes to strengthen the solid solution matrix. Meanwhile, they also promote formation of W-rich and Mo-rich carbides when present in large quantities in… read more here.
Keywords: dry sliding; stellite alloys; molybdenum stellite; sliding wear ... See more keywords
Probability of Formation of Wear Debris during Initial Running-In Period of Sliding Wear of Al-Si (LM13)-10 wt.% Fly Ash Composites
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05211-z
Abstract: In this paper, the effect of sliding distance on dry sliding wear behavior of LM 13 alloy reinforced with 10 wt.% fine fly ash particles was studied with special reference to the probability of formation… read more here.
Keywords: formation wear; wear debris; formation; sliding wear ... See more keywords
Effect of Mechanical Milling on the Mechanical, Dry Sliding Wear, and Impact Response of Sintered Nickel Based Superalloy
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05256-0
Abstract: In this study, effect of mechanical milling on the mechanical, dry sliding wear and impact response of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta superalloy has been investigated. Two nickel-based superalloy were sintered, firstly in their as-received elemental… read more here.
Keywords: response; dry sliding; effect mechanical; impact response ... See more keywords
Microstructure and Sliding Wear Behaviors of Plasma-Sprayed Fe-Based Amorphous Coatings in 3.5 wt.% NaCl Solution
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00866-0
Abstract: This paper explored the evolutions of microstructure, fracture toughness and sliding wear behaviors in 3.5 wt.% NaCl solution of Fe43Cr16Mo16(C, B, P)25 amorphous coatings prepared by air plasma spraying process with various powers. The results showed… read more here.
Keywords: amorphous coatings; wear behaviors; sliding wear; nacl solution ... See more keywords
Influence of B4C on Dry Sliding Wear Behavior of B4C/Al–Mg–Si Composites Synthesized via Powder Metallurgy Route
Sign Up to like & getrecommendations! Published in 2020 at "Metals and Materials International"
DOI: 10.1007/s12540-020-00814-6
Abstract: The aim of this work is to fabricate aluminum, boron carbide (B4C) based aluminum matrix composites (AMCs) using easy and cost effective powder metallurgy (P/M) route. Here, Al–Mg–Si composites having different weight fractions of B4C… read more here.
Keywords: dry sliding; b4c; powder metallurgy; metallurgy ... See more keywords
Reciprocating sliding wear properties of sintered Al-B4C composites
Sign Up to like & getrecommendations! Published in 2022 at "International Journal of Minerals, Metallurgy and Materials"
DOI: 10.1007/s12613-020-2243-5
Abstract: The fabrication of boron carbide reinforced aluminum matrix composites (Al-B4C) with various contents of B4C (1wt%, 6wt%, 15wt%, and 30wt%) was performed by powder metallurgy, and the influence of the content of B4C on their… read more here.
Keywords: sliding wear; reciprocating sliding; b4c composites; wear properties ... See more keywords
Optimization Study on Sliding Wear Characteristics and Heat-Treatment Conditions of Different Grades of Ferritic Ductile Cast Iron
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-01947-3
Abstract: The present work reports an experimental investigation on influence of microstructures on dry sliding wear performance of different grades of ferritic ductile iron. Ductile cast iron samples of ferritic grade have been subjected to different… read more here.
Keywords: different grades; heat treatment; sliding wear; iron ... See more keywords
Characterization, Prediction, and Optimization of Dry Sliding Wear Behaviour of Al6061/WC Composites
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-020-02107-3
Abstract: This investigation deals with an experimental analysis done on dry sliding wear behaviour of aluminium matrix composites reinforced with WC (tungsten carbide) particles. The composites were processed through powder metallurgy (P/M) technique with the addition… read more here.
Keywords: dry sliding; sliding wear; optimization; wear behaviour ... See more keywords
Dry Sliding Wear Behaviour of T6-Aluminium Alloy Composites Compared with Existing Aircraft Brake Pads
Sign Up to like & getrecommendations! Published in 2021 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-021-05770-w
Abstract: Current research investigates the effect of casehardening, plasma nitriding and T6 heat treatment condition on the dry sliding behaviour of microwave-assisted T6-AA2900-α-Al2O3composite material against aircraft disc material. Composite samples without post-treatment were also considered for… read more here.
Keywords: aircraft brake; dry sliding; aircraft; wear behaviour ... See more keywords
Prediction of Dry Sliding Wear Response of AlMg1SiCu/Silicon Carbide/Molybdenum Disulphide Hybrid Composites Using Adaptive Neuro-Fuzzy Inference System (ANFIS) and Response Surface Methodology (RSM)
Sign Up to like & getrecommendations! Published in 2021 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-021-05820-3
Abstract: In this research work, an effort was made to predict the dry sliding wear response of AlMg1SiCu alloy hybrid composites which were reinforced with 10% Silicon carbide particles (SiC) together with weight fractions of 3,… read more here.
Keywords: methodology; response; dry sliding; surface ... See more keywords
Optimisation of Dry Sliding Wear Parameters of Squeeze Cast AA336 Aluminium Alloy: Copper-Coated Steel Wire-Reinforced Composites by Response Surface Methodology
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Metalcasting"
DOI: 10.1007/s40962-018-0258-8
Abstract: AbstractCopper-coated steel wires (5 numbers) were uniformly reinforced in AA336 aluminium alloy using squeeze casting process. Microstructure of castings was examined, and dry sliding wear test was performed by considering the factors viz., load (10–50 N),… read more here.
Keywords: methodology; dry sliding; surface; sliding wear ... See more keywords