Biodegradation of naphthenic acids: identification of Rhodococcus opacus R7 genes as molecular markers for environmental monitoring and their application in slurry microcosms
Sign Up to like & getrecommendations! Published in 2020 at "Applied Microbiology and Biotechnology"
DOI: 10.1007/s00253-020-10378-5
Abstract: Nowadays, the increase of the unconventional oil deposit exploitation and the amount of oil sands process-affected waters (OSPW) in tailing ponds emerges the importance of developing bio-monitoring strategies for the restoration of these habitats. The… read more here.
Keywords: bio monitoring; rhodococcus opacus; naphthenic acids; gene ... See more keywords
Recovery of silicon powder from kerf loss slurry waste using superconducting high gradient magnetic separation technology
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Material Cycles and Waste Management"
DOI: 10.1007/s10163-017-0656-7
Abstract: A major challenge in recycling of silicon powder from kerf loss slurry waste is the complete removal of metal particles. The traditional acid leaching method is costly and not green. In this paper, a novel… read more here.
Keywords: slurry waste; magnetic separation; loss slurry; kerf loss ... See more keywords
High-Temperature Slurry System for Dry Hot Rock
Sign Up to like & getrecommendations! Published in 2017 at "Chemistry and Technology of Fuels and Oils"
DOI: 10.1007/s10553-017-0766-x
Abstract: Dry hot rock (DHR) is a kind of rock without water or steam lying 2-6 km underground with a temperature of 150-650°C. Domestic DHR at 3.5-7.5 km depth had a temperature of 150-250°C with a… read more here.
Keywords: dry hot; hot rock; temperature; rock ... See more keywords
Tribological Behavior of Aluminum Slurry Coating on 300M Steel
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2820-6
Abstract: Al slurry coatings, an alternative of Cd coating to protect against corrosion in the aerospace industry, are currently being explored to satisfy the stringent technology and safety requirements for aeronautical applications. The results of salt… read more here.
Keywords: layer slurry; slurry coatings; slurry coating; two layer ... See more keywords
Solar photocatalytic decolorization of synthetic dye solution using pilot scale slurry type falling film reactor
Sign Up to like & getrecommendations! Published in 2017 at "Korean Journal of Chemical Engineering"
DOI: 10.1007/s11814-017-0204-0
Abstract: Ag deposited TiO2 was prepared by simple chemical reduction method and its photocatalytic efficiency was evaluated for the decolorization of methylene blue dye using pilot scale slurry type falling film reactors (FFR) under sunlight. The… read more here.
Keywords: using pilot; pilot scale; deposited tio2; dye ... See more keywords
Investigations on CO2 hydrate slurry for transportation in carbon capture and storage
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-019-0947-0
Abstract: The flow characteristics of CO2 hydrate in the presence of Tween 80 in a scaled-up test facility were investigated in order to further elucidate the potential of CO2 hydrate slurry transportation in carbon capture and… read more here.
Keywords: co2 hydrate; hydrate slurry; slurry; slurry transportation ... See more keywords
Flow field characteristics of an agitator system of a large diameter slurry-water shield machine
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-021-0315-8
Abstract: A numerical model was established for calculation in this study on the basis of the standard k-epsilon turbulence model and the discrete phase model of the Euler-Lagrange equation. Results of the particle image velocimetry experiment… read more here.
Keywords: field characteristics; field; slurry; flow field ... See more keywords
Characteristic of SiC Slurry in Ultra Precision Lapping of Sapphire Substrates
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Precision Engineering and Manufacturing"
DOI: 10.1007/s12541-021-00521-1
Abstract: A method is proposed in this paper to prepare a SiC slurry with SiC particles selected by an ultrasonic-assisted elutriation method to reduce substrate surface damage caused by abrasive particles during lapping. Sapphire substrate lapping… read more here.
Keywords: slurry; sapphire substrates; lapping sapphire; sic slurry ... See more keywords
A Study of Solidification During Ice Slurry Generation in an Inclined Rectangular Cavity
Sign Up to like & getrecommendations! Published in 2018 at "Transactions of the Indian Institute of Metals"
DOI: 10.1007/s12666-018-1417-6
Abstract: The solidification process involved in ice slurry generation is accompanied by multiphase convection of liquid and solid phases. In this article, ice slurry generation in an inclined rectangular cavity has been investigated numerically and experimentally.… read more here.
Keywords: ice slurry; slurry; solidification; slurry generation ... See more keywords
Diffusion mechanism and sensitivity analysis of slurry while grouting in fractured aquifer with horizontal injection hole
Sign Up to like & getrecommendations! Published in 2020 at "Carbonates and Evaporites"
DOI: 10.1007/s13146-020-00587-4
Abstract: Investigating the diffusion law of slurry while grouting in fractured aquifer is of great significance to the safety in coal mining. In this paper, we comprehensively studied the slurry diffusion in the fractured aquifer, which… read more here.
Keywords: fractured aquifer; diffusion; distance; slurry grouting ... See more keywords
Advanced comminution modelling: Part 2 - Mills
Sign Up to like & getrecommendations! Published in 2020 at "Applied Mathematical Modelling"
DOI: 10.1016/j.apm.2020.06.048
Abstract: Abstract This second part paper explores rock breakage mechanisms, the life cycle of rocks in mills and the strong influence of end walls on charge motion within mills. We present recent advances in particle-based modelling… read more here.
Keywords: part; modelled using; mill modelled; mill ... See more keywords