Intelligent Solid Lubricant Materials with Failure Early-Warning Based on Triboluminescence
Sign Up to like & getrecommendations! Published in 2018 at "Tribology Letters"
DOI: 10.1007/s11249-018-1120-0
Abstract: In this work, triboluminescent powders (SrAl2O4: Eu2+, Dy3+) were composited with the typical graphite/epoxy solid lubricant materials, and the corresponding tribological properties and triboluminescent performance were investigated. The results suggest that the introduction of SrAl2O4:… read more here.
Keywords: lubricant materials; solid lubricant; triboluminescence; sral2o4 eu2 ... See more keywords
Mxene nanosheets as an emerging solid lubricant for machine elements – Towards increased energy efficiency and service life
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2020.146503
Abstract: Abstract Solid lubricants like carbon-based materials, transition metal dichalcogenide compounds, polymers and soft metals, each with their specific merits and limitations, pursue the goal of reducing friction and wear between two rubbing surfaces under substantially… read more here.
Keywords: mxene nanosheets; lubricant machine; solid lubricant; machine elements ... See more keywords
Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2021.117203
Abstract: Abstract The ability to axially inject liquid feedstock has encouraged the thermal spray research community to explore this concept to deposit coatings for various next generation functional applications. The current study explores the utilization of… read more here.
Keywords: solid lubricant; liquid; liquid feedstock; deposit ... See more keywords
Pencil sketch graphene films as solid lubricant on steel surface: Observation of transition to grapehene/amorphous carbon
Sign Up to like & getrecommendations! Published in 2018 at "Solid State Sciences"
DOI: 10.1016/j.solidstatesciences.2017.10.005
Abstract: Abstract During recent years, graphene as a solid lubrication material have been thoroughly studied under nano or micro scales, but rarely reported at industrial conditions. In present work, graphene films as solid lubricant were prepared… read more here.
Keywords: carbon; graphene films; graphene; solid lubricant ... See more keywords
Tribological properties of MoS2 nanosheets solid lubricant planted on TiO2 nanotube array bed
Sign Up to like & getrecommendations! Published in 2018 at "Tribology International"
DOI: 10.1016/j.triboint.2018.04.008
Abstract: Abstract Molybdenum disulfide (MoS2) is one of the most important solid lubricants used in titanium (Ti) to reduce the friction coefficient. The adherent capability between MoS2 and Ti determines its application. A layer of titanium… read more here.
Keywords: array; tribological properties; tribology; mos2 nanosheets ... See more keywords
Friend or Foe? Revising the Role of Oxygen in the Tribological Performance of Solid Lubricant MoS2
Sign Up to like & getrecommendations! Published in 2022 at "ACS Applied Materials & Interfaces"
DOI: 10.1021/acsami.2c15706
Abstract: Molybdenum disulfide (MoS2) is a solid lubricant used in various forms, such as a dry lubricant by itself or as a component of a more complex coating. In both these forms, the effect of oxygen… read more here.
Keywords: foe revising; solid lubricant; mos2; pure mos2 ... See more keywords
Preparation and tribological properties of multi-layer graphene/silicon dioxide composites-based solid lubricant coatings at elevated temperatures
Sign Up to like & getrecommendations! Published in 2023 at "Royal Society Open Science"
DOI: 10.1098/rsos.220740
Abstract: The solid lubricating coatings have an important role in hot metal forming. However, traditional lubricants cannot be applied to the harsh working conditions. In this investigation, the novel solid lubricant coatings including multi-layer graphene (MLG)/silicon… read more here.
Keywords: lubricant coatings; multi layer; layer graphene; solid lubricant ... See more keywords
Performance assessment of MQSL: Minimum quantity solid lubricant during turning of Inconel 718
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405415592128
Abstract: Abundant application of cutting fluids may increase production cost and cause environmental and health damages, particularly when not properly managed. Thus, alternative measures are needed to overcome the difficulties of using cutting fluids. If sustainable… read more here.
Keywords: turning inconel; inconel 718; minimum quantity; lubricant ... See more keywords
Performance evaluation of a tungsten carbide–based self-lubricant cutting tool
Sign Up to like & getrecommendations! Published in 2018 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405416681822
Abstract: Tungsten carbide cutting tools with and without solid lubricant (WC-10Co-5CaF2 and WC-10Co) were developed in-house via powder metallurgy. The developed cutting tools and a commercial WC-10Co cutting tool were used to machine cylindrical AISI 1020… read more here.
Keywords: tool; solid lubricant; lubricant 10co; cutting tool ... See more keywords
Analysis of electrostatic solid lubricant spray process parameters during turning Ti-6Al-4V alloy
Sign Up to like & getrecommendations! Published in 2020 at "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture"
DOI: 10.1177/0954405420918475
Abstract: Titanium alloys are considered as hard-to-cut material due to its relatively high resistance to corrosion, low thermal conductivity and high chemical reactivity. Effective penetration of sufficient amount of lubricant in the metalworking process is of… read more here.
Keywords: electrostatic charged; spray; charged solid; solid lubricant ... See more keywords
Influence of Solid Lubricant Addition on Friction and Wear Response of 3D Printed Polymer Composites
Sign Up to like & getrecommendations! Published in 2021 at "Polymers"
DOI: 10.3390/polym13172905
Abstract: In this study, acrylonitrile butadiene styrene (ABS) and graphite powder—a solid lubricant—were filled and characterized for friction and wear responses. The fused deposition modeling (FDM) technique was utilized to synthesize ABS–graphite composites. A twin-screw extrusion… read more here.
Keywords: addition; microscopy; friction; solid lubricant ... See more keywords