Effect of Cooling Rate on Precipitation Behavior of Al–7.65Zn–2.59Mg–1.95Cu Alloy with Minor Elements of Zr and Ti
Sign Up to like & getrecommendations! Published in 2019 at "Metals and Materials International"
DOI: 10.1007/s12540-019-00385-1
Abstract: Abstract We investigate the effect of cooling rate on the precipitation behavior during cooling from solution treatment temperature and post-aging of a high-strength Al–7.65Zn–2.59Mg–1.95Cu–0.11Zr–0.04Ti extruded alloy. Solution treatment at 450 °C caused the partial dissolution and… read more here.
Keywords: cooling rate; precipitation; effect cooling; solution treatment ... See more keywords
Microstructure and mechanical properties of 7A56 aluminum alloy after solution treatment
Sign Up to like & getrecommendations! Published in 2017 at "Rare Metals"
DOI: 10.1007/s12598-017-0985-7
Abstract: The effect of solution treatment on the microstructure and mechanical properties of a novel 7A56 aluminum alloy plate was investigated by optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD),… read more here.
Keywords: solution treatment; microscopy; microstructure mechanical; mechanical properties ... See more keywords
Control of Secondary Phases by Solution Treatment in a N-Alloyed High-Mn Cryogenic Steel
Sign Up to like & getrecommendations! Published in 2018 at "Acta Metallurgica Sinica (English Letters)"
DOI: 10.1007/s40195-018-0759-8
Abstract: The secondary phases of the steels have significant effects on the microstructure and mechanical properties, making controlling these secondary phases important. The control of MnS inclusions and AlN precipitates in a N-alloyed high-Mn twin-induced plastic… read more here.
Keywords: solution treatment; alloyed high; secondary phases; mns inclusions ... See more keywords
Effects of solution treatment and cold rolling on structure and tensile properties of hot-rolled Ti–7.5Mo alloy
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-019-00294-y
Abstract: The effects of solution treatment (ST) and cold rolling (CR) on structure and tensile properties of a heavily hot-rolled (HR) Ti–7.5Mo alloy were investigated. Experimental results indicated that, after HR with a one-pass 65% reduction… read more here.
Keywords: alloy; solution treatment; effects solution; tensile properties ... See more keywords
Improving bioactivity of inert bioceramics by a novel Mg-incorporated solution treatment
Sign Up to like & getrecommendations! Published in 2017 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2017.07.009
Abstract: Abstract Zirconia/alumina ceramics possess outstanding mechanical properties for dental and orthopedic applications, but due to their poor surface bioactivities they exhibit a weak bone-bonding ability. This work proposes an effective 30-min solution treatment which could… read more here.
Keywords: bioactivity; solution treatment; tzp; solution ... See more keywords
Effect of double stage solution treatment on the volume fraction of massive phase (αm) as a new method to obtain a fine lamellar α/β in Ti–6Al–4V alloy
Sign Up to like & getrecommendations! Published in 2019 at "Intermetallics"
DOI: 10.1016/j.intermet.2019.106581
Abstract: Abstract This study investigated the effect of double stage solution treatment (DSST) on the behavior of the massive phase (αm) transformation in a Ti–6Al–4V alloy. αm Phase transformation has been reported to occur by introducing… read more here.
Keywords: microscopy; effect double; solution treatment; fraction ... See more keywords
Texture and microstructure evolution of Incoloy 800H superalloy during hot rolling and solution treatment
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.12.174
Abstract: Abstract In this paper, we have implemented a specific hot rolling and solution treatments on Incoloy 800H to examine the evolution of texture and microstructure during this process. We also focused on the analysis of… read more here.
Keywords: solution treatment; hot rolling; solution; texture ... See more keywords
Effect of solution treatment on the texture and tensile properties of Mg2B2O5w/2024Al composite
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.01.080
Abstract: Abstract A 2024 aluminum matrix composite reinforced by Mg2B2O5 whiskers was fabricated by squeeze casting method. The effects of solution time on the texture and tensile properties are investigated. The results show that solution time… read more here.
Keywords: tensile properties; texture; texture tensile; solution treatment ... See more keywords
Solution treatment for enhanced hardness in Mo-modified Ti2AlNb-based alloys
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.07.149
Abstract: Abstract The present work investigates the change in the microstructure and the improvement in the microhardness in the Mo-modified Ti2AlNb alloys induced by solution treatment. Typical Widmanstatten O + B2 structure was observed in the alloys directly… read more here.
Keywords: modified ti2alnb; solution treatment; hardness; phase ... See more keywords
Effects of contact body temperature and holding time on the microstructure and mechanical properties of 7075 aluminum alloy in contact solid solution treatment
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153919
Abstract: Abstract Contact solid solution treatment (CST) of the 7075 aluminum alloy can significantly shorten the solution time, reduce energy consumption and improve production efficiency compared with traditional heating furnace solid solution treatment (FST). CST experiments… read more here.
Keywords: temperature; solution treatment; time; solution ... See more keywords
Effects of solution treatment on the microstructure and mechanical properties of naturally aged EN AW 2024 Al alloy sheet
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153943
Abstract: Abstract The solution experiments on cold rolled 2024 Al sheet with a 1070 Al coating were carried out at various temperatures and holding time. The effects of solution parameters on the microstructure evolution and mechanical… read more here.
Keywords: solution treatment; solution temperature; effects solution; sheet ... See more keywords