Fabrication of 17‐4PH Stainless Steel Foam by a Pressureless Powder Space Holder Technique
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202001202
Abstract: High compressive strength closed‐cell porous 17‐4PH precipitation hardening stainless steel with three different porosities (30%, 40%, and 50%, volume percent) was manufactured using a novel pressureless powder space holder method. The compressive strengths of the… read more here.
Keywords: pressureless powder; space holder; 4ph stainless; powder space ... See more keywords
Experimental modelling of copper foams processed through powder metallurgy route using a compressible space holder material
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Porous Materials"
DOI: 10.1007/s10934-017-0398-x
Abstract: The present work is focused on the processing of open cellular copper foams through space holder technique without the use of binders. In this work, moderate pressures were used during the cold compaction of the… read more here.
Keywords: space holder; metallurgy; holder material; copper foams ... See more keywords
Young's modulus estimation for CNT reinforced metallic foams obtained using different space holder particles
Sign Up to like & getrecommendations! Published in 2017 at "Composite Structures"
DOI: 10.1016/j.compstruct.2017.02.017
Abstract: Abstract In this work Finite Element Analysis (FEA) was used in order to estimate the effect of the pore size and the volume fraction of carbon nanotubes (CNT) used as reinforcement, for Al-12%Si foams with… read more here.
Keywords: different space; reinforced metallic; holder particles; metallic foams ... See more keywords
On the synthesis of nanostructured akermanite scaffolds via space holder method: The effect of the spacer size on the porosity and mechanical properties.
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2017.01.002
Abstract: In the present study, for the first time, the space holder method was used to prepare akermanite scaffolds with high porous structures, high interconnectivity, and high compressive strength, while the role of different spacer sizes… read more here.
Keywords: holder method; spacer; size; space holder ... See more keywords
Microstructure and compressive deformation behavior of SS foam made through evaporation of urea as space holder
Sign Up to like & getrecommendations! Published in 2019 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2018.11.040
Abstract: Abstract Open cell 316L stainless steel foam (SSF) of varying porosities have been developed through powder metallurgy route using evaporative spherical urea particles (UP) as a space holder. Stainless steel powders (SSP) were cold compacted… read more here.
Keywords: compressive deformation; deformation; foam; space holder ... See more keywords
Effect of particle shape on microstructure and compressive response of 316L SS foam by space holder technique
Sign Up to like & getrecommendations! Published in 2021 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2021.124924
Abstract: Abstract 316 L stainless steel (SS) foams with varying porosities have been developed through PM route using irregular and spherical particles shaped SS powder using urea as space holder. The effect of SS particle shape on… read more here.
Keywords: shape microstructure; particle shape; effect particle; particle ... See more keywords
In vivo analysis of bone-tissue interface in medical grade titanium and porous titanium with and without cenosphere as space holder
Sign Up to like & getrecommendations! Published in 2020 at "Materialia"
DOI: 10.1016/j.mtla.2020.100623
Abstract: Abstract The present study aims at understanding the in vivo behavior of titanium (Ti) foam (with and without addition of cenosphere as space holder) developed by powder metallurgy route which follows compaction at an applied… read more here.
Keywords: medical grade; cenosphere space; tissue; bone ... See more keywords
Fabrication of highly porous TiAl 3 intermetallics using titanium hydride as a reactant in the thermal explosion reaction
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Research"
DOI: 10.1557/jmr.2018.293
Abstract: Porous TiAl3 intermetallics were synthesized by the thermal explosion (TE) reaction from TiH2–75 at.% Al elemental powders combining with carbamide as the space holder. The results showed that the space holder particles were removed completely… read more here.
Keywords: fabrication highly; explosion reaction; reaction; space holder ... See more keywords
Manufacturing hydroxyapatite scaffold from snapper scales with green phenolic granules as the space holder material.
Sign Up to like & getrecommendations! Published in 2022 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.2139/ssrn.4208687
Abstract: Hydroxyapatite (HA) scaffold was made using the powder metallurgy with an use of a space holder method with a pore-forming agent from green phenolic (GP) granules. The novelty of this study was the use of… read more here.
Keywords: microscopy; phenolic granules; hydroxyapatite scaffold; green phenolic ... See more keywords