Recent Progress on Spray Pyrolysis for High Performance Electrode Materials in Lithium and Sodium Rechargeable Batteries
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Energy Materials"
DOI: 10.1002/aenm.201601578
Abstract: Advanced electrode materials have been intensively explored for next-generation lithium-ion batteries (LIBs), and great progresses have been achieved for many potential candidates at the lab-scale. To realize the commercialization of these materials, industrially-viable synthetic approaches… read more here.
Keywords: recent progress; spray pyrolysis; electrode materials; electrode ... See more keywords
Molecular Precursors for Tailoring Humidity Tolerance of Nanoscale Hopcalite Catalysts Via Flame Spray Pyrolysis
Sign Up to like & getrecommendations! Published in 2019 at "ChemCatChem"
DOI: 10.1002/cctc.201900990
Abstract: A systematic investigation of copper‐ and manganese‐carboxylate precursors derived from various organic acids (arylcarboxylate, alkylcarboxyate) and their transformation into copper manganese nanoparticles via flame spray pyrolysis (FSP) reveals significant impact on their physical and catalytic… read more here.
Keywords: flame spray; via flame; copper manganese; spray pyrolysis ... See more keywords
Photochromic Response and Steady‐State Photoconductivity of Fibrous‐Reticulated α‐MoO3 Thin Films Prepared by Modified Spray Pyrolysis Technique
Sign Up to like & getrecommendations! Published in 2019 at "Crystal Research and Technology"
DOI: 10.1002/crat.201900122
Abstract: A modified spray pyrolysis technique is used for preparing α‐MoO3 thin films after subsequent heat treatment at a relatively low temperature. The spray parameters are selected through a wide variety of elaboration conditions for best… read more here.
Keywords: moo3; thin films; film; pyrolysis technique ... See more keywords
Carrier concentration of calcium zinc oxide with different calcium contents deposited through spray pyrolysis
Sign Up to like & getrecommendations! Published in 2018 at "Microsystem Technologies"
DOI: 10.1007/s00542-018-3749-x
Abstract: Calcium zinc oxide (CaZnO) films were prepared via spray pyrolysis deposition at 300 °C with zinc acetate and calcium acetate precursors of various calcium/zinc atomic ratios (CZ) in an aqueous solution. The surface morphology and crystalline… read more here.
Keywords: spray pyrolysis; zinc; zinc oxide; calcium ... See more keywords
Highly transparent and conductive indium-doped zinc oxide films deposited at low substrate temperature by spray pyrolysis from water-based solutions
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1084-8
Abstract: In this paper, indium-doped zinc oxide (IZO) films were grown by spray pyrolysis, using zinc acetate and indium acetylacetonate precursors. The focus was on developing a solution recipe based on water as solvent, with only… read more here.
Keywords: spray pyrolysis; indium doped; substrate temperature; zinc oxide ... See more keywords
Synthesis and characterization of carbon-modified Li2MnP2O7/C composites prepared by spray pyrolysis
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science"
DOI: 10.1007/s10853-018-2219-2
Abstract: Pure crystalline Li2MnP2O7/C composite was prepared by spray pyrolysis (SP) followed by annealing (AN) process. Citric acid (CA) was added into the precursor solution as a carbon source to enhance the electrochemical property. The physical… read more here.
Keywords: carbon; spray pyrolysis; prepared spray; process ... See more keywords
Effect of thiourea concentration on the growth and properties of Cu$$_{3}$$3SnS$$_{4}$$4 thin films prepared by spray pyrolysis
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-016-5880-8
Abstract: Abstract$$\hbox {Cu}_{3}\hbox {SnS}_{4}$$Cu3SnS4 thin films were deposited onto soda-lime glass substrates held at $$360\,^{\circ }$$360∘C using spray pyrolysis technique. The influence of thiourea concentration on the growth and properties of these films is studied by… read more here.
Keywords: thiourea concentration; thin films; spray pyrolysis; concentration growth ... See more keywords
Laser processing of copper sulfide thin film prepared by spray pyrolysis
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-016-6310-7
Abstract: Copper sulfide (Cu2S) thin films were deposited by spray pyrolysis technique on glass substrate at 370 °C from aqueous solutions of copper chloride dehydrate (CuCl2.2H2O) and thiourea (SC(NH2)2). The sprayed film was blackish brown in color,… read more here.
Keywords: copper sulfide; copper; film; spray pyrolysis ... See more keywords
Properties of nickel doped In2S3 thin films deposited by spray pyrolysis technique
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8099-4
Abstract: In this work, nickel (Ni) doped indium sulfide (In2S3) films have been prepared by the spray pyrolysis (CSP) technique on glass substrates at 350 °C. The Ni doping level was changed with Ni:In (0, 2 and… read more here.
Keywords: technique; thin films; spray pyrolysis; in2s3 thin ... See more keywords
Physical properties evaluation of nebulized spray pyrolysis prepared Nd doped ZnO thin films for opto-electronic applications
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01039-z
Abstract: Thin films of neodymium (Nd) doped zinc oxide (NZO) were coated onto glass substrates at 400 °C by nebulized spray pyrolysis using different doping weight percentage (wt%) of Nd. The prepared films were exhibited in hexagonal… read more here.
Keywords: thin films; spray pyrolysis; physical properties; properties evaluation ... See more keywords
AZO transparent electrodes grown in situ during the deposition of zinc acetate dihydrate onto aluminum thin film by spray pyrolysis
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01713-2
Abstract: Zinc acetate dihydrate solution was deposited onto glass and a thin layer of aluminum (10 nm), by spray pyrolysis at 450 °C, growing zinc oxide (ZnO) thin films. The ZnO formation occurs differently on aluminum… read more here.
Keywords: spray pyrolysis; zinc; zno; transparent ... See more keywords