Use of X-ray Computed Tomography to Investigate Rolling Contact Cracks in Plasma Sprayed Fe–Cr–B–Si Coating
Sign Up to like & getrecommendations! Published in 2018 at "Tribology Letters"
DOI: 10.1007/s11249-018-1126-7
Abstract: Rolling contact fatigue (RCF) crack behavior within plasma sprayed coating is investigated. RCF experiments of coatings are conducted under rolling contact. Acoustic emission (AE) is used to monitor the on-line experimental process and detect the… read more here.
Keywords: ray computed; computed tomography; rolling contact; plasma sprayed ... See more keywords
Thermal-sprayed coating of optimally mixed ceramic powders on stainless steel with enhanced corrosion resistance
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Iron and Steel Research International"
DOI: 10.1007/s42243-018-0021-7
Abstract: Three different groups of ceramic powders for the thermal-sprayed coating were firstly prepared using sintering and ball milling. Then, these powders were separately deposited on three stainless steel substrates, followed by individual corrosion resistance examination.… read more here.
Keywords: thermal sprayed; sprayed coating; corrosion; corrosion resistance ... See more keywords
Microstructures, mechanical properties and corrosion resistance of sprayed Ca–P coating for micropatterning carbon/carbon substrate surface
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2019.11.233
Abstract: Abstract Carbon/carbon (C/C) surface micropatterning is a method of modifying the surface into the complete and regular geometry. In this work, we introduce a positive effect on bonding strength between sprayed Ca–P coating and surface… read more here.
Keywords: sprayed coating; corrosion resistance; surface; carbon ... See more keywords
Effect of the heating time on the preferred growth of hydroxyapatite crystal prepared by microwave-hydrothermal technique on the defective surface of sprayed coating
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.107205
Abstract: Abstract A calcium phosphate (Ca–P) coating is prepared on carbon/carbon (C/C) substrate by supersonic atmospheric plasma sprayed (SAPS) method. After that, microwave-hydrothermal (MH) method is used as the postprocessing method to lower surface defects for… read more here.
Keywords: time; growth; surface; sprayed coating ... See more keywords
Effects of laser remelting on microstructures and immersion corrosion performance of arc sprayed Al coating in 3.5% NaCl solution
Sign Up to like & getrecommendations! Published in 2018 at "Optics and Laser Technology"
DOI: 10.1016/j.optlastec.2017.09.013
Abstract: Abstract An arc sprayed aluminum (Al) coating on S355 steel was processed using a laser remelting (LR). The microstructures, chemical element composition, and phases of the obtained Al coating were analyzed using a field mission… read more here.
Keywords: immersion corrosion; laser remelting; sprayed coating; corrosion ... See more keywords
Microstructure evolution and properties of NiCrBSi thick coating remelted by gas tungsten arc
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.05.064
Abstract: Abstract The self-fluxing NiCrBSi coating with 800 μm thickness was prepared on the surface of AISI 1045 steel substrate by plasma spraying. Subsequently, the coating was remelted by gas tungsten arc (GTA) process. The microstructure and… read more here.
Keywords: microscopy; remelted coating; sprayed coating; thick coating ... See more keywords
Investigation of rolling/sliding contact fatigue behaviors of induction remelted Ni-based coating
Sign Up to like & getrecommendations! Published in 2019 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2019.04.089
Abstract: Abstract In the present work, Ni-based plasma sprayed coating was prepared on the surface of AISI 1045 steel and subsequently remelted by induction heating method. On base of this, the rolling/sliding contact fatigue behaviors of… read more here.
Keywords: contact; stress; rolling sliding; sprayed coating ... See more keywords
Microstructure and Wear Resistance of TIG Remelted NiCrBSi Thick Coatings
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Materials Science and Engineering"
DOI: 10.1155/2018/8979678
Abstract: The self-fluxing NiCrBSi coatings with 800 μm thickness were prepared on the surface of AISI1045 steel substrate by plasma spraying. And the remelted coating was obtained using by the tungsten inert gas (TIG) arc process. The… read more here.
Keywords: wear resistance; sprayed coating; remelted coating; tig remelted ... See more keywords
Effect of Laser Remelting of Fe-Based Thermally Sprayed Coating on AZ91 Magnesium Alloy on Its Structural and Tribological Properties
Sign Up to like & getrecommendations! Published in 2023 at "Coatings"
DOI: 10.3390/coatings13061033
Abstract: An Fe-based coating was thermally sprayed onto the surface of AZ91 magnesium alloy via the High-Velocity-Oxygen-Fuel (HVOF) method. The thermally sprayed coating with a thickness of 530 ± 25 µm and a porosity of 0.7… read more here.
Keywords: sprayed coating; laser remelting; az91 magnesium; magnesium alloy ... See more keywords