Abrasive-Erosive Wear of Thermally Sprayed Coatings from Experimental and Commercial Cr3C2-Based Powders
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-017-0638-2
Abstract: In this paper, high-velocity oxy-fuel sprayed coatings from experimental Cr3C2-Ni powder produced by mechanically activated thermal synthesis and disintegrator milling are compared with coatings from commercial Cr3C2-NiCr powder under room- and elevated-temperature abrasive-erosive wear (AEW)… read more here.
Keywords: temperature; coatings experimental; wear; commercial cr3c2 ... See more keywords
Application of Acoustic Emission Technology for Quantitative Characterization of Plasma-Sprayed Coatings Subjected to Bending Fatigue Tests
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-018-0750-y
Abstract: Plasma-sprayed coatings are widely used in industry, e.g., in applications subject to high wear and corrosion damage, or requiring thermal insulation. However, the failure behavior of such coatings has a great influence on the service… read more here.
Keywords: plasma; acoustic emission; plasma sprayed; bending fatigue ... See more keywords
Parametric Analysis and Modeling for the Porosity Prediction in Suspension Plasma-Sprayed Coatings
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Thermal Spray Technology"
DOI: 10.1007/s11666-019-00966-x
Abstract: The porous architecture of suspension plasma-sprayed coatings has a significant influence on the coating performances and thus should be properly designed for the intended applications. In this study, YSZ coatings were manufactured by suspension plasma… read more here.
Keywords: porosity; plasma sprayed; suspension; sprayed coatings ... See more keywords
Passivation of Al2O3-based refractories by air-plasma-sprayed coatings of Y2O3 to suppress reaction with gaseous Cs
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2017.08.117
Abstract: Abstract A simple way to use a commercial Al 2 O 3 -based refractory in a sintering furnace was developed for the head-end system in pyroprocessing. The key was to suppress the intrinsic chemical reactivity… read more here.
Keywords: refractories air; air plasma; plasma sprayed; sprayed coatings ... See more keywords
Thermally sprayed Al/Mo coatings on industrial steel E335 and effects on electrochemical parameters in simulated acid rain
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2016.12.095
Abstract: Abstract Thermal spraying was used to achieve bilayer Al/Mo coatings on E335 steel. The microstructure and chemical composition of the coatings were examined by SEM-EDS and XRD. The corrosion behaviours of bare and Al/Mo coated… read more here.
Keywords: coatings industrial; industrial steel; sprayed coatings; thermally sprayed ... See more keywords
Flame-sprayed Zn-Al coatings on ABS without chemical surface preparation
Sign Up to like & getrecommendations! Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.128574
Abstract: Abstract Metallization of polymeric materials is a process that manages to combine the properties of polymers and metals, to expand its range of applications. In this research, the deposition of a Zn-Al alloy on a… read more here.
Keywords: flame sprayed; chemical surface; sprayed coatings; surface preparation ... See more keywords
Structure and properties of detonation gun sprayed coatings from the synthesized FeAlSi/Al2O3 powder
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.08.063
Abstract: Abstract Structure and properties of detonation gun sprayed (DS) coatings from the synthesized FeAlSi/Al2O3 powder have been investigated. The powder was manufactured through a mechanically assisted self-propagating high-temperature synthesis route. A small addition of nanosized… read more here.
Keywords: al2o3 powder; powder; fealsi al2o3; sprayed coatings ... See more keywords
Wear of grinding rotors with thermally-sprayed coatings in a high-speed mill
Sign Up to like & getrecommendations! Published in 2018 at "Wear"
DOI: 10.1016/j.wear.2018.05.016
Abstract: Abstract In this paper, the erosion behavior of three types of protective thermally-sprayed coatings and non-coated substrate steel was investigated under semi-industrial test conditions using a laboratory high-speed pin mill DESI-11. The grinding in the… read more here.
Keywords: grinding rotors; sprayed coatings; thermally sprayed; coatings high ... See more keywords
Titanium Plasma-Sprayed Coatings on Polymers for Hard Tissue Applications
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma11122536
Abstract: The paper presents the results of titanium plasma spraying (TPS) on polymer substrates. Polyethylene (PE300), polyamide PA6, and fiber glass-reinforced polyamide (PA6.6-GF30) were used as substrates. The PE300 and PA6.6-GF30 substrates exhibited appropriate behavior during… read more here.
Keywords: coatings polymers; titanium plasma; plasma sprayed; sprayed coatings ... See more keywords