Development of 1 kW‐class Ammonia‐fueled Solid Oxide Fuel Cell Stack
Sign Up to like & getrecommendations! Published in 2020 at "Fuel Cells"
DOI: 10.1002/fuce.201900131
Abstract: Power generation performance and long‐term durability of ammonia‐fueled solid oxide fuel cell (SOFC) systems are investigated with SOFC stacks consisting of 30 planar anode‐supported cells. SOFC systems with three different operation modes are employed: direct… read more here.
Keywords: ammonia cracker; ammonia; performance; fuel ... See more keywords
Numerical Modeling of RBMK-1000 Graphite Stack Distortion
Sign Up to like & getrecommendations! Published in 2018 at "Atomic Energy"
DOI: 10.1007/s10512-018-0349-x
Abstract: Engineering and detailed three-dimensional models of the RBMK-1000 graphite stack for modeling of its distortions caused by the appearance of longitudinal cracks in the blocks owing to the nonuniformity of the temperature and fluence distributions… read more here.
Keywords: rbmk 1000; 1000 graphite; stack; graphite stack ... See more keywords
Research on Intelligent Detection of Command Level Stack Pollution for Binary Program Analysis
Sign Up to like & getrecommendations! Published in 2020 at "Mobile Networks and Applications"
DOI: 10.1007/s11036-019-01507-0
Abstract: How to efficiently and reasonably analyze binary programs has always been the primary issue in the field of software security. As for the stack, the current technology has begun to show limitations on various conditions.… read more here.
Keywords: research; stack; analysis; level ... See more keywords
Simulation of two types fuel cell stack models to investigate the relationship between air flow distribution and structure
Sign Up to like & getrecommendations! Published in 2019 at "Ionics"
DOI: 10.1007/s11581-019-03059-5
Abstract: For solid oxide fuel cell (SOFC) stacks, it is generally agreed that the distribution qualities of the fuel and air flows would determine the temperature and pressure distribution within the stack. The flow distribution within… read more here.
Keywords: fuel cell; stack; flow distribution; structure ... See more keywords
Microstructural Characterization of Multilayer Metal Stack on InGaAs/InP Contact
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-020-08226-3
Abstract: Al/InGaAs, Al/Ti/InGaAs, and Al/Ni/InGaAs contacts were prepared by conducting rapid thermal annealing at different temperatures, and the interfacial reaction was characterized using x-ray diffraction, atomic force microscopy, and transmission electron microscopy. The specific contact resistivity… read more here.
Keywords: stack; microscopy; ingaas; metal ... See more keywords
Probing Temperature Inside Planar SOFC Short Stack, Modules, and Stack Series
Sign Up to like & getrecommendations! Published in 2017 at "JOM"
DOI: 10.1007/s11837-016-2155-z
Abstract: Probing temperature inside a solid oxide fuel cell (SOFC) stack lies at the heart of the development of high-performance and stable SOFC systems. In this article, we report our recent work on the direct measurements… read more here.
Keywords: cell stack; stack series; temperature; stack ... See more keywords
A method to study the intake consistency of the dual-stack polymer electrolyte membrane fuel cell system under dynamic operating conditions
Sign Up to like & getrecommendations! Published in 2018 at "Applied Energy"
DOI: 10.1016/j.apenergy.2018.09.184
Abstract: Abstract The Polymer Electrolyte Membrane Fuel Cell (PEMFC) system is considered as one of the most potential power plant on vehicle. However, the efficiency of the high power fuel cell stack has restricted the high… read more here.
Keywords: fuel cell; system; stack; fuel ... See more keywords
Standby thermal model of a vanadium redox flow battery stack with crossover and shunt-current effects
Sign Up to like & getrecommendations! Published in 2019 at "Applied Energy"
DOI: 10.1016/j.apenergy.2019.02.067
Abstract: Abstract This paper presents an original model capable of simulating the thermal behavior of a vanadium redox flow battery stack in standby condition, i.e. without power and reactant flow, where the temperature distribution in the… read more here.
Keywords: flow battery; stack; model; redox flow ... See more keywords
Effect of clamping pressure on liquid-cooled PEMFC stack performance considering inhomogeneous gas diffusion layer compression
Sign Up to like & getrecommendations! Published in 2020 at "Applied Energy"
DOI: 10.1016/j.apenergy.2019.114073
Abstract: Abstract Gas diffusion layer (GDL) is a critical component of fuel cells, since it directly determines the transfer rate of mass, charge and heat that in turn affects the cell performance and stability. Within a… read more here.
Keywords: compression; clamping pressure; stack; performance ... See more keywords
Reversible solid-oxide cell stack based power-to-x-to-power systems: Economic potential evaluated via plant capital-cost target
Sign Up to like & getrecommendations! Published in 2021 at "Applied Energy"
DOI: 10.1016/j.apenergy.2021.116700
Abstract: Abstract Electrical energy storage systems are indispensable for the electrical grid with high penetration renewables. Reversible solid-oxide cell stack based power-to-x-to-power systems, which can switch between power generation and power storage, can achieve a high… read more here.
Keywords: stack; power; target; cell ... See more keywords
Modelling of local mechanical failures in solid oxide cell stacks
Sign Up to like & getrecommendations! Published in 2021 at "Applied Energy"
DOI: 10.1016/j.apenergy.2021.116901
Abstract: Abstract Solid oxide cells can deliver highly efficient energy conversions between electricity and fuels/chemicals. A central challenge of upscaling solid oxide cells is the probability of failure of the brittle ceramic components. The failures of… read more here.
Keywords: oxide cell; mechanical failures; stack; cell stacks ... See more keywords