Enhanced Passivation Layer by Cr Diffusion of 301 Stainless Steel Facilitated by SMAT
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900125
Abstract: AISI 301 stainless steel (SS) is known for its high strength and hardness but tends to be less corrosion resistant for many applications. Several attempts have been made in the past to investigate its corrosion… read more here.
Keywords: passivation layer; stainless steel; corrosion; smat ... See more keywords
Fabrication of 17‐4PH Stainless Steel Foam by a Pressureless Powder Space Holder Technique
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202001202
Abstract: High compressive strength closed‐cell porous 17‐4PH precipitation hardening stainless steel with three different porosities (30%, 40%, and 50%, volume percent) was manufactured using a novel pressureless powder space holder method. The compressive strengths of the… read more here.
Keywords: pressureless powder; space holder; 4ph stainless; powder space ... See more keywords
Efficient Ablation, further GHz Burst Polishing, and Surface Texturing by Ultrafast Laser
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202302262
Abstract: A large variety of ultrafast laser‐matter interaction regimes and different processed surface finishing qualities of stainless steel can be achieved by varying the laser processing parameters. The optimization of the laser fluence to the most… read more here.
Keywords: laser; efficient ablation; surface; ghz burst ... See more keywords
Fabrication of Gradient Periodic Surface Structures on Stainless Steel Using Direct Laser Interference Patterning
Sign Up to like & getrecommendations! Published in 2024 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202400500
Abstract: In this work, the fabrication of gradient periodic line‐like structures with continuously changing spatial period on stainless steel by means of two‐beam direct laser interference patterning (DLIP) is studied. A 70 ps (picosecond [ps]) pulsed laser… read more here.
Keywords: laser; topography; fabrication gradient; gradient periodic ... See more keywords
Influence of Testing Temperature on the Mechanical Performance of Brazed Conventionally and Additively Manufactured 316L Stainless Steel Joints
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500323
Abstract: In this work, brazed joints between samples of 316L stainless steel (316LSS) are formed using the Ag155 brazing filler metal. As an additional aspect of the investigation, the joints combine stainless steel formed by conventional… read more here.
Keywords: temperature; 316l stainless; steel; stainless steel ... See more keywords
Stable Titania Nanostructures on Stainless Steel Coronary Stent Surface for Enhanced Corrosion Resistance and Endothelialization
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Healthcare Materials"
DOI: 10.1002/adhm.201601353
Abstract: Stainless steel (SS) coronary stents continue to present risk of in-stent restenosis that impact its long term safety and efficacy. The present work focuses on developing a drug-free and polymer-less surface on coronary stents by… read more here.
Keywords: steel coronary; titania; stainless steel; corrosion resistance ... See more keywords
Dense Silicon Nanowire Networks Grown on a Stainless Steel Fiber Cloth: A Flexible and Robust Anode for Lithium-ion Batteries.
Sign Up to like & getrecommendations! Published in 2021 at "Advanced materials"
DOI: 10.1002/adma.202105917
Abstract: Silicon nanowires (Si NWs) have great promise as an anode material for lithium-ion batteries (LIBs) due to their very high specific capacity. Achieving adequate mass loadings for binder-free Si NWs have been restricted by low… read more here.
Keywords: fiber cloth; stainless steel; anode; ion batteries ... See more keywords
Liquid‐Infused Slippery Stainless Steel Surface Prepared by Alcohol‐Assisted Femtosecond Laser Ablation
Sign Up to like & getrecommendations! Published in 2021 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.202001334
Abstract: Nepenthes‐inspired liquid‐infused slippery surface (LISS) attracts great attention because it can repel different kinds of liquid and shows great stability. However, the vast majority of LISSs are realized on polymer materials which limit the applications.… read more here.
Keywords: surface; femtosecond laser; alcohol assisted; assisted femtosecond ... See more keywords
Quantitative 3D Characterization for Kinetics of Corrosion Initiation and Propagation in Additively Manufactured Austenitic Stainless Steel
Sign Up to like & getrecommendations! Published in 2022 at "Advanced Science"
DOI: 10.1002/advs.202201162
Abstract: In situ X‐ray computed tomography (X‐ray CT) is used to investigate the effects of characteristic microstructural features on the pitting initiation and propagation in austenitic stainless steel specimens prepared with laser powder bed fusion (LPBF)… read more here.
Keywords: stainless steel; pit; corrosion; propagation ... See more keywords
Promoting Silk Fibroin Adhesion to Stainless Steel Surfaces by Interface Tailoring.
Sign Up to like & getrecommendations! Published in 2022 at "ChemPlusChem"
DOI: 10.1002/cplu.202200335
Abstract: Bonding dissimilar materials has been a persistent challenge for decades. This paper presents a method to modify a stainless steel surface (316 L), routinely used in medical applications to enable the significant adhesion of a biopolymer… read more here.
Keywords: adhesion; stainless steel; silk; silk fibroin ... See more keywords
Borohydride Hydrolysis Using a Mechanically and Chemically Stable Aluminium‐Stainless Steel Porous Monolith Catalyst Made by 3D Printing
Sign Up to like & getrecommendations! Published in 2024 at "Chemsuschem"
DOI: 10.1002/cssc.202401264
Abstract: Abstract The challenge of moving to a carbon‐free energy economy is highlighted in the context of technology and materials restrictions. Many technologies needed for the so‐called energy transition depend on critical metals such as platinum,… read more here.
Keywords: aluminium stainless; borohydride hydrolysis; catalyst; stainless steel ... See more keywords