Articles with "steel composite" as a keyword



Photo by davidhellmann from unsplash

Shear behavior of a strain hardening cementitious composites (SHCC)-Grooved steel composite deck

Sign Up to like & get
recommendations!
Published in 2019 at "Composites Part B: Engineering"

DOI: 10.1016/j.compositesb.2018.10.025

Abstract: Abstract The deterioration and premature failure of an orthotropic steel deck pavement during its service period is a pressing issue. Strain hardening cementitious composites (SHCC) possess an extreme tensile ductility, in the range of 3%–5%… read more here.

Keywords: shcc grooved; steel; grooved steel; composite structure ... See more keywords
Photo from wikipedia

Numerical parametric study on ultimate load and ductility of concrete encased equal-leg angle steel composite columns

Sign Up to like & get
recommendations!
Published in 2019 at "Engineering Structures"

DOI: 10.1016/j.engstruct.2019.109679

Abstract: Abstract Steel-concrete composite high bridge pier has been applied increasingly in China and around the world. Most applied steel type in the composite piers are H-shaped steel and steel pipe, while seldom research or practice… read more here.

Keywords: equal leg; steel composite; angle steel; steel ... See more keywords
Photo from wikipedia

The flexural behavior of cold-formed steel composite beams

Sign Up to like & get
recommendations!
Published in 2020 at "Engineering Structures"

DOI: 10.1016/j.engstruct.2020.110819

Abstract: Abstract In this study, six full-scale specimens were tested to investigate the flexural behavior and capacity of cold-formed steel composite floors. Three different shear transfer mechanisms, i.e. slab-to-deck interfacial epoxy, screw, and Z-tab connector, were… read more here.

Keywords: steel; flexural behavior; steel composite; formed steel ... See more keywords
Photo from wikipedia

Numerical study on fire resistance of rectangular section stainless steel-concrete composite beam

Sign Up to like & get
recommendations!
Published in 2021 at "Fire Safety Journal"

DOI: 10.1016/j.firesaf.2021.103436

Abstract: Abstract To investigate the fire resistance of stainless steel-concrete composite beams (referred to as stainless steel composite beam), numerical simulations of rectangular section stainless steel composite beams under fire were carried out. The influences of… read more here.

Keywords: composite beam; stainless steel; steel; steel composite ... See more keywords
Photo from wikipedia

Full scale testing and development of wood-steel composite shear walls

Sign Up to like & get
recommendations!
Published in 2019 at "Structures"

DOI: 10.1016/j.istruc.2019.04.010

Abstract: Abstract Modern building designs often feature open floor plans and large shear wall openings, which can be difficult to achieve using light-frame construction. This study explores a new type of shear wall, called the Wood-Steel… read more here.

Keywords: steel; wood; wood steel; web plate ... See more keywords
Photo by majesticlukas from unsplash

Flexural behaviour of steel composite beams encased by engineered cementitious composites

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Constructional Steel Research"

DOI: 10.1016/j.jcsr.2018.01.004

Abstract: Abstract In this study, the flexural behaviour of a new form of Engineered Cementitious Composite (ECC) - Light Weight Concrete (LWC) encased steel composite beams is studied. Four simply supported ECC-LWC encased steel composite beams… read more here.

Keywords: strength; ecc; steel composite; composite beams ... See more keywords
Photo from wikipedia

Partial shear connection in light steel composite beams

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Constructional Steel Research"

DOI: 10.1016/j.jcsr.2018.11.005

Abstract: Abstract A new form of light steel composite beam has been developed that uses C sections acting in tension with shear connectors in the form of screws or bolts or perforations in the web of… read more here.

Keywords: shear connection; steel; light steel; partial shear ... See more keywords
Photo by riccardo__oliva from unsplash

New developments in steel and composite bridges

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Constructional Steel Research"

DOI: 10.1016/j.jcsr.2020.106277

Abstract: Abstract Innovations are often initiated by bridge design. In this paper out of the large variety of new solutions and developments in bridge design, the focus is on three different subjects: Especially composite constructions made… read more here.

Keywords: developments steel; composite bridges; steel composite; steel ... See more keywords
Photo from wikipedia

Fabrication of a 2-layer laminated steel composite by friction stir additive manufacturing

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of Manufacturing Processes"

DOI: 10.1016/j.jmapro.2020.01.031

Abstract: Abstract Laminated composites are a kind of material composed of different material layers that are broadly used in various industries. In the present research, the friction stir welding was employed to fabricate a 2-layer composite… read more here.

Keywords: layer; friction stir; steel composite; laminated steel ... See more keywords
Photo from wikipedia

Microstructure and wear performance of arc-sprayed Al/316L stainless-steel composite coating

Sign Up to like & get
recommendations!
Published in 2019 at "Surface and Coatings Technology"

DOI: 10.1016/j.surfcoat.2019.06.006

Abstract: Abstract To improve the wear resistance of aluminium alloys, an Al/316L stainless-steel composite coating was successfully prepared on an aluminium alloy surface by two-channel-synchronization wire feeding arc spraying technology. The composite coating has a ductile… read more here.

Keywords: steel; stainless steel; 316l stainless; composite coating ... See more keywords
Photo from wikipedia

Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting

Sign Up to like & get
recommendations!
Published in 2020 at "Tribology International"

DOI: 10.1016/j.triboint.2020.106525

Abstract: Abstract Numerous reports have elucidated that synthesis of graphene (Gr)-reinforced metal matrix composites is difficult by conventional manufacturing techniques because Gr exhibits a large surface area as well as high tendency to agglomerate. Consequently, herein,… read more here.

Keywords: stainless; graphene reinforced; steel composite; stainless steel ... See more keywords