Dense Silicon Nanowire Networks Grown on a Stainless Steel Fiber Cloth: A Flexible and Robust Anode for Lithium-ion Batteries.
Sign Up to like & getrecommendations! Published in 2021 at "Advanced materials"
DOI: 10.1002/adma.202105917
Abstract: Silicon nanowires (Si NWs) have great promise as an anode material for lithium-ion batteries (LIBs) due to their very high specific capacity. Achieving adequate mass loadings for binder-free Si NWs have been restricted by low… read more here.
Keywords: fiber cloth; stainless steel; anode; ion batteries ... See more keywords
Study on Coupling of Glass Powder and Steel Fiber as Silica Fume Replacement in Ultra-High Performance Concrete: Concrete Sleeper Admixture Case Study
Sign Up to like & getrecommendations! Published in 2020 at "KSCE Journal of Civil Engineering"
DOI: 10.1007/s12205-020-0832-5
Abstract: To investigate the substitution of silica fume (SF) with the coupling of glass powder (GP) and steel fiber (STF), a concrete sleeper admixture (CSA) contains SF is considered as the reference concrete admixture. The use… read more here.
Keywords: silica fume; admixture; study; glass powder ... See more keywords
Impedance-based structural health monitoring applied to steel fiber-reinforced concrete structures
Sign Up to like & getrecommendations! Published in 2020 at "Journal of the Brazilian Society of Mechanical Sciences and Engineering"
DOI: 10.1007/s40430-020-02458-4
Abstract: The goal of the present contribution is to test the effectiveness of an impedance-based structural health monitoring (ISHM) methodology to detect damage in steel fiber-reinforced concrete structures. For this aim, a piezoceramic sensor coated with… read more here.
Keywords: health monitoring; fiber reinforced; impedance; reinforced concrete ... See more keywords
The effect of fiber orientation on the post-cracking behavior of steel fiber reinforced concrete under bending and uniaxial tensile tests
Sign Up to like & getrecommendations! Published in 2018 at "Cement and Concrete Composites"
DOI: 10.1016/j.cemconcomp.2018.07.012
Abstract: Abstract The present paper deals with an experimental study on the post-cracking tensile behavior of Steel Fiber Reinforced Concrete (SFRC). In this regard, a broad experimental campaign based on Uniaxial Tensile Tests (UTTs) on notched… read more here.
Keywords: post cracking; fiber reinforced; behavior steel; post ... See more keywords
Assessment of steel fiber corrosion in self-healed ultra-high-performance fiber-reinforced concrete and its effect on tensile performance
Sign Up to like & getrecommendations! Published in 2020 at "Cement and Concrete Research"
DOI: 10.1016/j.cemconres.2020.106091
Abstract: Abstract This study evaluated steel fiber corrosion and tensile behaviors of plain and self-healed ultra-high-performance fiber-reinforced concrete (UHPFRC) exposed to 3.5% sodium chloride (NaCl) solution. The degree of steel fiber corrosion was quantitatively evaluated via… read more here.
Keywords: fiber; fiber corrosion; steel fiber; performance ... See more keywords
Synergistic effect of hybrid stainless steel fiber and carbon nanotube on mechanical properties and electromagnetic interference shielding of polypropylene nanocomposites
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.02.044
Abstract: Abstract This study provides critical insight into the design of nanocomposites and presents both enhanced mechanical and electromagnetic interference (EMI) shielding performance. Polypropylene nanocomposites reinforced with carbon nanotube (CNT) alone, stainless steel fiber (SSF) alone,… read more here.
Keywords: steel fiber; filler; polypropylene nanocomposites; stainless steel ... See more keywords
Combined effects of steel fiber and coarse aggregate size on the compressive and flexural toughness of high-strength concrete
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2017.11.009
Abstract: This paper investigates the effects of steel fiber content and coarse aggregate size on the mechanical properties of high-strength concrete with a specified compressive strength value of 60 MPa. The paper also explores the correlation… read more here.
Keywords: strength; high strength; aggregate; compressive flexural ... See more keywords
The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling
Sign Up to like & getrecommendations! Published in 2018 at "Composite Structures"
DOI: 10.1016/j.compstruct.2018.08.066
Abstract: Abstract This paper deals with the interfacial bonding performance of the steel fiber in the steel-polypropylene hybrid fiber reinforced cementitious composite. 42 groups of straight and hooked-end steel fiber specimens are investigated by the single-sided… read more here.
Keywords: fiber; end steel; steel fiber; hybrid fiber ... See more keywords
Study on mechanical properties of steel fiber reinforced nano-concrete (SFRNC) after elevated temperature
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.113941
Abstract: Abstract This paper presented 180 specimens to investigate mechanical properties of steel fiber reinforced Nano-concrete (SFRNC) after elevated temperature through the method of compression test, splitting tension test and flexure test. The test parameters effects… read more here.
Keywords: strength; steel fiber; elevated temperature; nano concrete ... See more keywords
An improved calibration method of the K&C model for modeling steel-fiber reinforced concrete
Sign Up to like & getrecommendations! Published in 2021 at "Composite Structures"
DOI: 10.1016/j.compstruct.2021.114010
Abstract: Abstract The K&C material model, one of the widely used concrete models implemented in LS-DYNA for blast or impact analysis, is modified to improve its numerical accuracy for steel-fiber reinforced concrete (SFRC). Many input parameters… read more here.
Keywords: steel fiber; fiber reinforced; calibration method; method ... See more keywords
Investigation on flexural toughness evaluation method of steel fiber reinforced lightweight aggregate concrete
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2016.11.101
Abstract: Abstract The main purpose of this paper was to investigate the influence of steel fiber (SF) content on the flexural properties of steel fiber reinforced lightweight aggregate concrete (SFLWC) and propose a suitable method for… read more here.
Keywords: fiber reinforced; method; fiber; lightweight aggregate ... See more keywords