Influence of reinforcement mesh configuration for improvement of concrete durability
Sign Up to like & getrecommendations! Published in 2017 at "China Ocean Engineering"
DOI: 10.1007/s13344-017-0067-5
Abstract: Steel bar in concrete structures under harsh environmental conditions, such as chlorine corrosion, seriously affects its service life. Bidirectional electromigration rehabilitation (BIEM) is a new method of repair technology for reinforced concrete structures in such… read more here.
Keywords: steel mesh; chloride ions; corrosion; biem ... See more keywords
Construction of superhydrophobic copper film on stainless steel mesh by a simple liquid phase chemical reduction for efficient oil/water separation
Sign Up to like & getrecommendations! Published in 2019 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.05.045
Abstract: Abstract Herein, we present a simple, easily operated, and inexpensive approach to fabricate superhydrophobic and superoleophilic stainless steel mesh via in-situ growth of copper (Cu) nanoparticles and the hydrophobic modification. The obtained meshes exhibit favorable… read more here.
Keywords: water; stainless steel; water separation; oil ... See more keywords
Studies on a new stainless steel mesh dynamic membrane for wastewater treatment.
Sign Up to like & getrecommendations! Published in 2019 at "Bioresource technology"
DOI: 10.1016/j.biortech.2019.122405
Abstract: In this study an innovative dynamic membrane bioreactor (DMBR) was implemented from a stainless-steel mesh filter, which was used as a support material, and activated sludge used as an adsorption and filtration interface containing particulate… read more here.
Keywords: treatment; steel mesh; stainless steel; activated sludge ... See more keywords
Uniform and stable electrophoretic deposition of graphene oxide on steel mesh: Low temperature thermal treatment for switching from superhydrophilicity to superhydrophobicity
Sign Up to like & getrecommendations! Published in 2019 at "Colloids and Surfaces A: Physicochemical and Engineering Aspects"
DOI: 10.1016/j.colsurfa.2019.05.085
Abstract: Abstract In this work, graphene oxide (GO) is deposited on steel mesh by anodic electrophoretic deposition (EPD) and then is reduced by low temperature thermal annealing. Morphology of the samples is characterized by scanning electron… read more here.
Keywords: steel; electrophoretic deposition; graphene oxide; steel mesh ... See more keywords
Durability of plain concrete prism strengthened with galvanized steel mesh and CFRP laminates under harsh environmental conditions
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.122904
Abstract: Abstract This paper investigates the bond durability of recently developed galvanized steel mesh (GSM) strengthening systems compared to the carbon fiber-reinforced polymer (CFRP) composites under severe environments. Plain concrete prisms notched at the mid-span and… read more here.
Keywords: durability; 730 days; steel mesh; plain concrete ... See more keywords
Binder-free immobilization of TiO2 photocatalyst on steel mesh via electrospraying and hot-pressing and its application for organic micropollutant removal and disinfection.
Sign Up to like & getrecommendations! Published in 2018 at "Journal of hazardous materials"
DOI: 10.1016/j.jhazmat.2018.07.100
Abstract: An immobilized photocatalyst was prepared by thermally treating TiO2-coated steel mesh (TiO2-IS) in a laboratory hot-press with no binder. TiO2 coating was performed by electrospraying a 1 mg/mL methanol dispersion of Evonik P25 powder. The thermal… read more here.
Keywords: tio2; binder free; disinfection; steel mesh ... See more keywords
Crystalline TiO2 supported on stainless steel mesh deposited in a one step process via pulsed DC magnetron sputtering for wastewater treatment applications
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.03.101
Abstract: Abstract TiO2 thin films were deposited on woven stainless-steel mesh by pulsed DC magnetron sputtering, at room temperature without substrate bias or annealing. Woven stainless-steel mesh is inexpensive, flexible, semi-transparent and has a high surface… read more here.
Keywords: tio2; pulsed magnetron; stainless steel; steel mesh ... See more keywords
Electrochemical performance of nanosheet-like- and nanoparticle-structured cobalt oxyhydroxide grown on stainless steel mesh substrate
Sign Up to like & getrecommendations! Published in 2020 at "Materials Letters"
DOI: 10.1016/j.matlet.2020.128293
Abstract: Abstract Hierarchical cobalt oxyhydroxide (CoOOH) nanostructures were directly grown on flexible stainless steel (SS) mesh substrates via a cost-effective, facile chemical solution method. The nanostructures were grown at 90 °C with different time intervals, and their… read more here.
Keywords: mesh substrate; cobalt oxyhydroxide; steel mesh; stainless steel ... See more keywords
Gate-Embedding Strategy for Pore Size Manipulation on Stainless Steel Mesh: Toward Highly Efficient Water-in-Oil Nanoemulsions Separation
Sign Up to like & getrecommendations! Published in 2019 at "Industrial & Engineering Chemistry Research"
DOI: 10.1021/acs.iecr.9b03263
Abstract: Separation of water-in-oil nanoemulsions is of great significance but difficult. In this work, using a facile brush-painting method, a paste containing PDMS, graphite, TiO2 and ethyl cellulose was coated on a low-mesh-number stainless steel mesh,… read more here.
Keywords: stainless steel; separation; oil nanoemulsions; steel mesh ... See more keywords
Full near-ultraviolet response photoelectrochemical ultraviolet detector based on TiO2 nanocrystalline coated stainless steel mesh photoanode
Sign Up to like & getrecommendations! Published in 2021 at "Nanotechnology"
DOI: 10.1088/1361-6528/ac1b57
Abstract: In order to solve the ‘ultraviolet (UV) filtering problem’ caused by traditional sandwich-type structure in photoelectrochemical (PEC) UV detector, we design a special electrode based on stainless steel mesh, which integrates the light absorption layer… read more here.
Keywords: response; steel mesh; detector; stainless steel ... See more keywords
Underwater superoleophobic stainless steel mesh fabricated by laser cladding a copper foil for oil–water separation
Sign Up to like & getrecommendations! Published in 2018 at "Materials Research Express"
DOI: 10.1088/2053-1591/aac200
Abstract: A simple and inexpensive one-step laser cladding method is reported to make the stainless steel mesh underwater superoleophobic. The micro/nanoscale morphologies were created via cladding a copper foil onto the stainless steel mesh using the… read more here.
Keywords: steel mesh; laser cladding; stainless steel; underwater superoleophobic ... See more keywords