Advances in Materials Science and Engineering: Prediction of AISI 304 Stainless Steel Pipe Deformation by FEM Simulation
Sign Up to like & getrecommendations! Published in 2019 at "Metallurgist"
DOI: 10.1007/s11015-019-00851-6
Abstract: The high quality standards required for metal forming call for compliance tests aimed to guarantee that such standards are met. Such tests often imply a waste of time and of economic resources. In particular, when… read more here.
Keywords: stainless steel; fem; stainless; steel pipe ... See more keywords
Experiences in Drivability Analysis, Testing of Open-Ended Steel Pipe Piles and Drilled Shafts at Dahej LNG Project, India
Sign Up to like & getrecommendations! Published in 2020 at "Indian Geotechnical Journal"
DOI: 10.1007/s40098-020-00449-9
Abstract: APDPPL has constructed a coal terminal at Dahej, India. The 670-m off-shore jetty head is connected to land with 1170-m pile-supported trestle followed by 1200-m rubble mounted bund. The original plan was to construct the… read more here.
Keywords: pipe piles; analysis; dahej; steel ... See more keywords
The fabrication of Fe-W-mullite-based composite coatings inside a steel pipe by centrifugal-SHS process
Sign Up to like & getrecommendations! Published in 2017 at "Journal of the Australian Ceramic Society"
DOI: 10.1007/s41779-017-0043-9
Abstract: Fe-W-mullite-based composite coatings were prepared on the inner-surface steel pipe from two reactions of Fe(Mn)WO4-Fe2O3-Al-Si and Fe(Mn)WO4-Fe2O3-B2O3-Al-Si mixture powder by centrifugal-SHS process. Standard Gibbs energy minimization method was used to compute the adiabatic temperature (Tad)… read more here.
Keywords: centrifugal shs; mullite based; based composite; composite coatings ... See more keywords
Calculation method for the axial load-bearing capacity of steel pipe-to-sleeve grouted connections
Sign Up to like & getrecommendations! Published in 2022 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.125621
Abstract: Abstract The existing axial load-bearing capacity calculation method for the steel pipe-to-sleeve grouted connections is introduced. It is proposed that by considering the tensile strain of a grouting material along the inner cyclic direction of… read more here.
Keywords: load bearing; sleeve grouted; pipe sleeve; bearing capacity ... See more keywords
Design of steel pipe-jacking based on buckling analysis by finite strip method
Sign Up to like & getrecommendations! Published in 2017 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2016.11.016
Abstract: Abstract In practice, the steel pipe-jacking can be regarded as a thin-walled cylindrical shell mainly subjected to jacking force in the axial direction and surrounded by the soil which is usually simplified and modeled as… read more here.
Keywords: strip method; finite strip; pipe jacking; steel ... See more keywords
Probabilistic fire demand model for steel pipe-racks exposed to localised fires
Sign Up to like & getrecommendations! Published in 2021 at "Engineering Structures"
DOI: 10.1016/j.engstruct.2020.111310
Abstract: Abstract This paper proposes a new method to build a probabilistic fire demand model (PFDM) to investigate the structural behaviour of a steel pipe-rack located within an industrial installation and exposed to a localised fire.… read more here.
Keywords: model; fire; demand; steel pipe ... See more keywords
Analytical investigation of rectangular steel pipe shear connector
Sign Up to like & getrecommendations! Published in 2021 at "Structures"
DOI: 10.1016/j.istruc.2020.12.019
Abstract: Abstract Rectangular steel pipe (RSP) which is a new kind of connector in a composite slab of steel–concrete has been proposed. Research on the shear properties of RSPs is limited, but such data are needed… read more here.
Keywords: shear capacity; rectangular steel; steel; connector ... See more keywords
Analysis on shaft resistance of the steel pipe prebored and precast piles based on field load-transfer curves and finite element method
Sign Up to like & getrecommendations! Published in 2020 at "Soils and Foundations"
DOI: 10.1016/j.sandf.2020.03.011
Abstract: Abstract Shaft resistance is the major source of bearing capacity and has a critical effect on settlement of prebored and precast pile (PPP). In this paper, the load-transfer behavior and shaft resistance of steel pipe… read more here.
Keywords: shaft; steel pipe; load transfer;
Failure criteria of a carbon steel pipe elbow for low-cycle fatigue using the damage index
Sign Up to like & getrecommendations! Published in 2020 at "Thin-walled Structures"
DOI: 10.1016/j.tws.2020.106800
Abstract: Abstract A seismic isolation system installed in a nuclear power plant will respond to the load caused by an earthquake. As a result, a larger displacement may occur in the presence of the system, compared… read more here.
Keywords: pipe elbow; carbon steel; failure criteria; using damage ... See more keywords
Field Tests on Axial Behavior of Grouted Steel Pipe Micropiles in Marine Soft Clay
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Geomechanics"
DOI: 10.1061/(asce)gm.1943-5622.0001656
Abstract: Abstract This paper presents full-scale field tests of grouted steel pipe micropile embedded in marine soft clay under compressive and tensile loads. The load-displacement responses, axial forces, ... read more here.
Keywords: marine soft; soft clay; grouted steel; steel pipe ... See more keywords
Localized Corrosion Occurrence in Low-Carbon Steel Pipe Caused by Microstructural Inhomogeneity
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15051870
Abstract: In this study, the cause of failure of a low-carbon steel pipe meeting standard KS D 3562 (ASTM A135), in a district heating system was investigated. After 6 years of operation, the pipe failed prematurely… read more here.
Keywords: steel pipe; pipe; localized corrosion; low carbon ... See more keywords