AMFNet: aggregated multi-level feature interaction fusion network for defect detection on steel surfaces
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Intelligent Manufacturing"
DOI: 10.1007/s10845-025-02613-5
Abstract: Current models for detecting defects on steel surfaces struggle to fully utilize potential positional and semantic information. Usually, these models merely combine high-level and low-level features in a straightforward manner, leading to an increase in… read more here.
Keywords: level; aggregated multi; feature; steel surfaces ... See more keywords
Wettability control of modified stainless steel surfaces for oxide catalyst carrier slurry coating
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Industrial and Engineering Chemistry"
DOI: 10.1016/j.jiec.2020.08.017
Abstract: Abstract Micrometer sized FeAl particles were added on 304 stainless steel surfaces to prepare rough surfaces with irregular patterns to make the surface super hydrophilic in order to effectively coat catalyst carrier alumina slurry on… read more here.
Keywords: steel surfaces; stainless steel; catalyst carrier; slurry ... See more keywords
Durable Near-Zero Wear Behavior Achieved by Polymer-Based Protic Ionic Liquids on Engineering Steel Surfaces.
Sign Up to like & getrecommendations! Published in 2025 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.5c11623
Abstract: Near-zero wear on engineering steel surfaces is a promising solution to extend the service life of mechanical equipment. However, most existing strategies offer only limited low wear under particular conditions and friction pairs. To address… read more here.
Keywords: steel; zero wear; engineering steel; polymer based ... See more keywords
Mechanochemistry of Zinc Dialkyldithiophosphate on Steel Surfaces under Elastohydrodynamic Lubrication Conditions.
Sign Up to like & getrecommendations! Published in 2020 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.9b20059
Abstract: Zinc dialkyldithiophosphate (ZDDP) is added to engine lubricants to reduce wear and ensure reliable operation. ZDDP reacts under rubbing conditions to form protective zinc/iron phosphate tribofilms on steel surfaces. Recently, it has been demonstrated that… read more here.
Keywords: steel surfaces; zinc dialkyldithiophosphate; stress; zddp ... See more keywords
Macroscale Superlubricity Induced by MXene/MoS2 Nanocomposites on Rough Steel Surfaces under High Contact Stresses.
Sign Up to like & getrecommendations! Published in 2023 at "ACS nano"
DOI: 10.1021/acsnano.2c09640
Abstract: Toward the goal of achieving superlubricity, or near-zero friction, in industrially relevant material systems, solution-processed multilayer Ti3C2Tx-MoS2 blends are spray-coated onto rough 52100-grade steel surfaces as a solid lubricant. The tribological performance was assessed in… read more here.
Keywords: steel surfaces; microscopy; mos2; mos2 nanocomposites ... See more keywords
A technical feasibility study evaluating sustainable enzyme‐based cleaning‐in‐place (CIP) for removal of milk deposits formed on stainless steel surfaces during cheesemilk pasteurisation
Sign Up to like & getrecommendations! Published in 2025 at "International Journal of Dairy Technology"
DOI: 10.1111/1471-0307.70071
Abstract: Cleaning‐in‐place (CIP) is the most common method of cleaning in dairy processing, predominantly using sodium hydroxide (caustic) based nonbiodegradable detergents frequently followed by nitric acid to remove milk residues deposited during heating at high temperatures.… read more here.
Keywords: milk; cip; feasibility; stainless steel ... See more keywords
Evaluation of Magnetron Sputtered TiAlSiN-Based Thin Films as Protective Coatings for Tool Steel Surfaces
Sign Up to like & getrecommendations! Published in 2024 at "Coatings"
DOI: 10.3390/coatings14091184
Abstract: Steel surface protection with hard coatings is essential in metalworking, yet developing high-performance coatings is challenging. TiAlSiN coatings grown on various substrates using commercial targets have been extensively studied, but consistent data on their properties… read more here.
Keywords: coatings tool; tool steel; steel; magnetron ... See more keywords
Static and Dynamic Friction of Pure and Friction-Modified PA6 Polymers in Contact with Steel Surfaces: Influence of Surface Roughness and Environmental Conditions
Sign Up to like & getrecommendations! Published in 2019 at "Lubricants"
DOI: 10.3390/lubricants7020017
Abstract: In the present study, PA6 polymers with and without solid lubricant inclusions were investigated against S1100QL steel surfaces that had different surface roughness values—a very high surface roughness (Rz ≈ 40 µm) and a low… read more here.
Keywords: friction; surface roughness; steel surfaces; pa6 polymers ... See more keywords
Femtosecond Laser Fabrication of Stable Hydrophilic and Anti-Corrosive Steel Surfaces
Sign Up to like & getrecommendations! Published in 2019 at "Materials"
DOI: 10.3390/ma12203428
Abstract: We report on a novel single-step method to develop steel surfaces with permanent highly hydrophilic and anti-corrosive properties, without employing any chemical coating. It is based on the femtosecond (fs) laser processing in a saturated… read more here.
Keywords: anti corrosive; laser; steel surfaces; femtosecond laser ... See more keywords
Ultrasound Corrosion Mapping on Hot Stainless Steel Surfaces
Sign Up to like & getrecommendations! Published in 2024 at "Metals"
DOI: 10.3390/met14121425
Abstract: This study investigates the application of Phased Array Corrosion Mapping (PACM) as a non-destructive testing (NDT) method for detecting and monitoring corrosion growth on hot stainless steel (SS) surfaces, specifically focusing on SS 304 and… read more here.
Keywords: hot stainless; corrosion mapping; corrosion; stainless steel ... See more keywords
Electrochemical Study of the Effect of Zinc Baths with Additives on Steel Surfaces Coating by Electroplating
Sign Up to like & getrecommendations! Published in 2024 at "Portugaliae Electrochimica Acta"
DOI: 10.4152/pea.2024420402
Abstract: This work presents a set of electrochemical techniques applied to investigate the effect of Zn baths with additives on steel surfaces coating by EP. The form and intensity of the reduction in I were analyzed… read more here.
Keywords: baths additives; effect; surfaces coating; additives steel ... See more keywords