Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy
Sign Up to like & getrecommendations! Published in 2020 at "Acta Materialia"
DOI: 10.1016/j.actamat.2019.11.056
Abstract: Abstract Deformation mechanisms of a friction stir processed Fe40Mn20Co20Cr15Si5 transformative high entropy alloy using three different process parameters were studied to explain the microstructural dependence of tensile response in these specimens. The relative strain hardening… read more here.
Keywords: stir processed; deformation; deformation mechanisms; friction stir ... See more keywords
Passive and electrochemical response of friction stir processed pure Titanium
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2017.02.095
Abstract: Abstract In the present work, the effects of multi-pass friction stir processing on the passive behavior and electrochemical response of pure Titanium in a phosphate buffer solution (pH = 10.69) were studied. Microstructures of treated and untreated… read more here.
Keywords: friction; pure titanium; friction stir; electrochemical response ... See more keywords
Microstructure and mechanical properties of friction stir processed Al−Mg2Si alloys
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65384-5
Abstract: Abstract The microstructure and mechanical properties of friction stir processed Al−Mg2Si alloys were studied by TEM and EBSD. The results showed that an increase in the tool rotation speed (300−700 r/min) led to a decrease… read more here.
Keywords: properties friction; microstructure mechanical; friction stir; mechanical properties ... See more keywords
Evaluating the microstructure and mechanical properties of friction stir processed Al–Si alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materials Science and Technology"
DOI: 10.1080/02670836.2019.1612577
Abstract: ABSTRACT In this study, mechanical behaviour and microstructural evolution in friction stir processing (FSP) of casting hypereutectic A390 aluminium alloy have been investigated. The mechanical behaviour of FSP samples was investigated by measuring the strain… read more here.
Keywords: evaluating microstructure; properties friction; microstructure mechanical; friction stir ... See more keywords
Tribological behaviour of recursive friction stir processed AA7075
Sign Up to like & getrecommendations! Published in 2020 at "Industrial Lubrication and Tribology"
DOI: 10.1108/ilt-02-2020-0070
Abstract: This study aims to investigate and present the tribological behaviour of recursively friction stir processed 7075 aluminium alloy.,In this work, aluminium 7075 alloy is friction stir processed recursively by varying the tool rotational speed, traverse… read more here.
Keywords: recursive friction; friction; friction stir; tribological behaviour ... See more keywords
Microstructure of In-Situ Friction Stir Processed Al-Cu Transition Zone
Sign Up to like & getrecommendations! Published in 2020 at "Metals"
DOI: 10.3390/met10060818
Abstract: The majority of literature sources dedicated to dissimilar Al-Cu friction stir welding testifies to the formation of intermetallic compounds (IMC) according to diffusion-controlled reactions, i.e., without liquation on the Al/Cu interfaces. Fewer sources report on… read more here.
Keywords: zone; situ friction; friction; friction stir ... See more keywords
Effect of Initial Microstructure on Grain Refinement and Enhanced Low Temperature Superplaticity in Friction Stir Processed Ti-6Al-4V Alloy
Sign Up to like & getrecommendations! Published in 2018 at "Defect and Diffusion Forum"
DOI: 10.4028/www.scientific.net/ddf.385.189
Abstract: Ti-6Al-4V alloy sheet with two kinds of initial microstructure (base material (BM) and heat-treated material) was subjected to friction stir processing (FSP). These two kinds of friction stir processed (FSPed) materials show similar characteristics that… read more here.
Keywords: initial microstructure; friction stir; 6al alloy; material ... See more keywords
Tribological, structural and mechanical characteristics of friction stir processed aluminium-based matrix composites reinforced with stainless steel micro-particles
Sign Up to like & getrecommendations! Published in 2020 at "Engineering Solid Mechanics"
DOI: 10.5267/j.esm.2019.12.001
Abstract: Article history: Received 15 October 2019 Accepted 19 December 2019 read more here.
Keywords: characteristics friction; friction stir; tribological structural; structural mechanical ... See more keywords