An Experimental Study of Rolled Friction-Stir-Welded Aluminum 6061-T6 Joints Subjected to Static and Fatigue Loading Conditions
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-04949-w
Abstract: The present study attempts to examine monotonic and fatigue response of friction-stir-welded (FSW) Al 6061-T6 joints. Surface-rolling techniques of in situ and sequential were adapted to evaluate the influence of generated surface deformation on static… read more here.
Keywords: stir welded; fatigue; static fatigue; friction stir ... See more keywords
Microstructure and mechanical properties evaluation of friction stir welded boron steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Mechanical Science and Technology"
DOI: 10.1007/s12206-020-0422-y
Abstract: The microstructure and mechanical properties of friction stir welded boron steel in butt joint configuration are experimentally studied. Two different friction stir welding (FSW) parameter combinations are used to successfully fabricate butt joints. Microstructural analysis… read more here.
Keywords: stir welded; microstructure mechanical; friction stir; stir ... See more keywords
Optimization of WEDM Process Parameters for Machining of Friction-Stir-Welded 5754 Aluminum Alloy Using Box–Behnken Design of RSM
Sign Up to like & getrecommendations! Published in 2018 at "Arabian Journal for Science and Engineering"
DOI: 10.1007/s13369-018-3238-7
Abstract: In the present study, the effect of wire electrical discharge machining (WEDM) process parameters such a pulse on time, pulse off time and peak current on the machining characteristics such as material removal rate, kerf… read more here.
Keywords: stir welded; friction stir; process parameters; wedm process ... See more keywords
Heterogeneous local straining behavior under monotonic and cyclic loadings in a friction stir welded aluminum alloy
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Fatigue"
DOI: 10.1016/j.ijfatigue.2019.03.037
Abstract: Abstract Local strain evolution under monotonic and fatigue loadings was investigated in a friction stir welded (FSWed) Al-Mg-Sc alloy. The microstructure of the weld exhibited strong heterogeneity. Digital image correlation (DIC) technique was employed to… read more here.
Keywords: fatigue; local straining; friction stir; straining behavior ... See more keywords
Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2017.06.002
Abstract: Abstract In the present work, aluminum tailor friction stir welded blanks (TFSWBs) of dissimilar grade and gauge combinations were fabricated successfully with optimized parameters. The tensile tests of TFSWBs were conducted perpendicular to the weld… read more here.
Keywords: die; stir welded; modified conical; friction stir ... See more keywords
Effect of welding parameters and B4C contents on the microstructure and mechanical properties of friction stir welded B4C/6061Al joints
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Processing Technology"
DOI: 10.1016/j.jmatprotec.2017.08.028
Abstract: Abstract Annealed 2.8 mm thick B 4 C/6061Al composite sheets with various B 4 C particle contents (15, 20, 25, 30 wt%) were friction stir welded (FSW) at a tool rotation rate of 1000 rpm and traverse speeds… read more here.
Keywords: stir welded; effect welding; friction stir; mechanical properties ... See more keywords
Microstructure and mechanical properties’ modification of low-temperature friction stir welded non-combustive Mg-9A1-1Zn-1Ca alloy joint
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Research and Technology"
DOI: 10.1016/j.jmrt.2019.07.056
Abstract: Abstract Friction-stir-welded (FSW) Mg alloys usually exhibit an undesirable combination of strength and ductility compared to the base material, posing disadvantages to practical engineering applications. In this work, low-temperature FSW was applied on a non-combustive… read more here.
Keywords: combustive 9a1; friction stir; low temperature; 9a1 1zn ... See more keywords
Utilization of Random Vector Functional Link integrated with Marine Predators Algorithm for tensile behavior prediction of dissimilar friction stir welded aluminum alloy joints
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.08.022
Abstract: Abstract Friction stir welding (FSW) method becomes an effective technique for welding dissimilar alloys such as AA2024 and AA5083 as the conventional fusion welding methods are not very suitable for welding the dissimilar alloysand cause… read more here.
Keywords: tensile behavior; aluminum alloy; stir welded; friction stir ... See more keywords
Microstructural variation through weld thickness and mechanical properties of peened friction stir welded 6061 aluminum alloy joints
Sign Up to like & getrecommendations! Published in 2017 at "Materials Characterization"
DOI: 10.1016/j.matchar.2017.02.011
Abstract: Abstract The current study examined the effect of microstructure variation on the development of mechanical properties in friction stir welded joints of 6061-T6 aluminum alloy, which were subsequently processed by shot peening (SP). Following to… read more here.
Keywords: variation; aluminum alloy; stir welded; friction stir ... See more keywords
Microbiologically influenced corrosion behavior of friction stir welded S32654 super austenitic stainless steel in the presence of Acidithiobacillus caldus SM-1 biofilm
Sign Up to like & getrecommendations! Published in 2020 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2020.101491
Abstract: Abstract The microbiologically influenced corrosion (MIC) susceptibility of friction stir welded (FSW) S32654 super austenitic stainless steel (SASS) in the presence of acid producing bacterium Acidithiobacillus caldus SM-1 was investigated by surface analysis techniques and… read more here.
Keywords: stir welded; caldus; influenced corrosion; friction stir ... See more keywords
Corrosion characteristics and wear performance of cold sprayed coatings of reinforced Al deposited onto friction stir welded AA2024-T3 joints
Sign Up to like & getrecommendations! Published in 2018 at "Surface and Coatings Technology"
DOI: 10.1016/j.surfcoat.2018.06.058
Abstract: Abstract A pure Al coating and Al based composite coating reinforced with 20 vol% Al2O3 particles were deposited onto a friction stir welded AA2024-T3 joint substrate. The effects of hard Al2O3 particles on the coating microstructure,… read more here.
Keywords: pure coating; corrosion; stir welded; friction stir ... See more keywords