Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Acta Geotechnica"
DOI: 10.1007/s11440-017-0529-1
Abstract: Abstract The results of a series of laboratory tests on unimproved and cement-improved specimens of two clays are presented, and the ability of a bounding surface elastoplastic constitutive model to predict the observed behavior is…
read more here.
Keywords:
cement;
cement improved;
strain behavior;
stress strain ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "International Journal of Environmental Science and Technology"
DOI: 10.1007/s13762-018-2106-z
Abstract: Mechanical behavior of municipal solid waste (MSW) is of great importance due to many landfill slide failures in recent decades. MSW is the major structural element in landfill which is more complicated than soil owing…
read more here.
Keywords:
msw;
landfill;
strain behavior;
stress strain ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.04.126
Abstract: Abstract Polyvinyl alcohol (PVA) fiber is limitedly investigated in the concrete containing large size coarse aggregates. Correspondingly, there is limited literature available related to the modeling of its mechanical properties. This paper suggests a model…
read more here.
Keywords:
pva;
stress strain;
model;
stress ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.123718
Abstract: Abstract Recent advances in concrete technology and construction have promoted an increasing utilization of concrete in fatigue-critical structures, such as wind turbine towers. While research into concrete fatigue is not a new topic and has…
read more here.
Keywords:
concrete fatigue;
fatigue;
fatigue loading;
strain ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.157855
Abstract: Abstract This study dealt with discovering the optimal conditions of the twist extrusion parameters for producing materials possess enhanced strain behavior with the least amount of extrusion load. It was found that the twist angle…
read more here.
Keywords:
angle;
strain behavior;
process;
twist extrusion ... See more keywords
Photo from archive.org
Sign Up to like & get
recommendations!
0
Published in 2017 at "Polymer"
DOI: 10.1016/j.polymer.2017.08.065
Abstract: Abstract This work addresses the large strain behaviors of thermoplastic polyurethanes (TPUs) spanning a range of fractions of hard and soft contents in both experiment and theoretical modeling. The key mechanical features involve a combination…
read more here.
Keywords:
modeling;
deformation;
mechanisms thermoplastic;
strain behavior ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Results in Physics"
DOI: 10.1016/j.rinp.2018.06.023
Abstract: Abstract The stress-strain behavior of ferrite and austenite in a commercial 2205 duplex stainless steel was investigated by using nanoindentation test and microstructure-based finite element method (FEM). Results showed that the optimum load range for…
read more here.
Keywords:
ferrite austenite;
behavior ferrite;
stress;
strain behavior ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Journal of Structural Engineering"
DOI: 10.1061/(asce)st.1943-541x.0002120
Abstract: AbstractReliable material stress-strain relationship is the cornerstone of any analysis process. Unlike reinforced concrete, limited studies focused on the stress-strain behavior of confined reinfo...
read more here.
Keywords:
behavior shaped;
shaped confined;
masonry;
strain behavior ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of biomechanical engineering"
DOI: 10.1115/1.4037071
Abstract: Computational modeling is critical to medical device development and has grown in its utility for predicting device performance. Additionally, there is an increasing trend to use absorbable polymers for the manufacturing of medical devices. However,…
read more here.
Keywords:
poly lactide;
model;
strain behavior;
plla ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2022 at "Materials"
DOI: 10.3390/ma15030730
Abstract: Due to the rapid increase in population, the use of automobile vehicles increases day by day, which causes a considerable increase in the waste tires produced worldwide. Research studies are in progress to utilize scrap…
read more here.
Keywords:
stress strain;
strain behavior;
strain;
concrete ... See more keywords