Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2020 at "Advanced Functional Materials"
DOI: 10.1002/adfm.202002433
Abstract: Here, we present an approach to incorporate graphene nanosheets into a silicone rubber matrix via solid stabilization of oil-in-water emulsions. These emulsions can be cured into discrete, graphenecoated silicone balls or continuous, elastomeric films by…
read more here.
Keywords:
silicone;
gauges enabled;
strain;
ultrasensitive strain ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "Microsystem Technologies"
DOI: 10.1007/s00542-016-3048-3
Abstract: AbstractCompliant micro-positioning platforms are necessary for highly precise applications. Measurements of the displacement and reinforcements of the stiffness are two major concerns of any compliant micro-positioning platform. This paper proposes a compliant micro-positioning platform (CMPP)…
read more here.
Keywords:
viscoelastic damper;
platform;
micro positioning;
strain gauges ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2019 at "Experimental Techniques"
DOI: 10.1007/s40799-019-00312-4
Abstract: This paper presents a new approach validated experimentally to reconstruct with strain gauges the deformed shape of a straight beam with circular cross section. It is based on a novel beam-specific strain gauge model that…
read more here.
Keywords:
strain gauges;
gauge model;
shape;
beam ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
1
Published in 2018 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.8b12057
Abstract: In this study, we developed a novel and efficient process for the fabrication of resistive strain gauges for healthcare-related applications. First, 1,9-nonanedithiol cross-linked gold nanoparticle (GNP) films were prepared via layer-by-layer (LbL) spin-coating and subsequently…
read more here.
Keywords:
linked gold;
contact printing;
cross linked;
strain ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2018 at "AIP Advances"
DOI: 10.1063/1.5033365
Abstract: A cantilever-based microring laser structure was proposed for easily integrating III-V active layer into mechanically stretchable substrates. Local strain gauges were demonstrated by embedding cantilever-based microring lasers in a deformable polymer substrate. The characterizations of…
read more here.
Keywords:
microring lasers;
cantilever based;
local strain;
based microring ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "2D Materials"
DOI: 10.1088/2053-1583/ab33a1
Abstract: Robust strain gauges are fabricated by growing PtSe2 layers directly on top of flexible polyimide foils. These PtSe2 layers are grown by low-temperature, thermally-assisted conversion of predeposited Pt layers. Under applied flexure the PtSe2 layers…
read more here.
Keywords:
ptse2 layers;
directly polymer;
grown directly;
strain gauges ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2017 at "IEEE Sensors Journal"
DOI: 10.1109/jsen.2017.2666784
Abstract: Myoelectric prosthesis is an electronic device designed to mimic human anatomy and to replace a missing body part for an amputee. Today some prostheses can provide the users with several degrees of freedom. But the…
read more here.
Keywords:
movement;
matrix;
bracelet;
strain gauge ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Sensors and Materials"
DOI: 10.18494/sam.2018.1946
Abstract: A parallel testing method has been proposed with integrated strain gauges based on the piezoresistive effect to shorten the testing time for investigating tensile-mode fatigue characteristics of single-crystal silicon (SCS). The method allows a high…
read more here.
Keywords:
parallel tensile;
single crystal;
crystal silicon;
strain gauges ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2019 at "Coatings"
DOI: 10.3390/coatings9070417
Abstract: Niobium-containing diamond-like carbon films (a-C:H:Nb) were deposited in a hybrid plasma-enhanced chemical vapor deposition (PECVD) and direct-current magnetron sputtering (DCMS) process, using a niobium target in an argon/acetylene atmosphere on industrial polyimide foil, spin-coated polyimide…
read more here.
Keywords:
containing dlc;
strain gauges;
coatings various;
dlc coatings ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2019 at "Materials"
DOI: 10.3390/ma12172730
Abstract: This paper focuses on the experimental determination of the shrinkage process in Self-Compacting High-Performance Concrete (SCC HPC) exposed to dry air and autogenous conditions. Special molds with dimensions of 100 mm × 60 mm ×…
read more here.
Keywords:
measurement;
shrinkage;
performance concrete;
high performance ... See more keywords
Photo from wikipedia
Sign Up to like & get
recommendations!
0
Published in 2018 at "Micromachines"
DOI: 10.3390/mi10010018
Abstract: The anatomy of a tooth was the inspiration for this tactile sensor study. The sensor consisted of a pole that was fixed in the middle of an acrylic base using a viscoelastic silicone elastomer. Four…
read more here.
Keywords:
detection;
tactile sensor;
resistance change;
sensor ... See more keywords