Microalloyed Steels Laminated Composites Processed by the High‐Strain Rate Compression Tests
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201800098
Abstract: Multilayered metal‐to‐metal (MM) composites have been gathering much interest in the last decades because of its extraordinary mechanical properties. In the present study, the microstructural changes and mechanical behavior of two grades of microalloyed steels,… read more here.
Keywords: compression; microalloyed steels; strain; strain rate ... See more keywords
Effects of Strain Rate on Low‐Cycle Fatigue Behaviors of Fe–22Mn–0.6C TWIP Steel
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201801042
Abstract: The influence of strain rate on low‐cycle fatigue (LCF) behavior of Fe–22Mn–0.6C twinning‐induced plasticity (TWIP) steel is investigated by conducting LCF tests. The LCF tests are performed at a strain amplitude of 0–1.4% with strain… read more here.
Keywords: strain rate; fatigue; twip steel; strain ... See more keywords
Evolution of Twin Boundaries and Contribution to Dynamic Recrystallization and Grain Growth of Inconel 625
Sign Up to like & getrecommendations! Published in 2019 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201900426
Abstract: Dynamic recrystallization (DRX) and grain growth behaviors of Inconel 625 alloy are investigated via hot compression test in the temperature range of 900-1200 degrees C and strain rate range of 0.01-10 s(-1). The electron backscatter… read more here.
Keywords: inconel 625; temperature; strain rate; grain growth ... See more keywords
Superplastic Properties and Deformation Mechanisms of Ti60 Titanium Alloy under Coupled Temperature and Strain Rate Conditions
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500606
Abstract: High‐temperature tensile tests and electron backscatter diffraction analysis are employed to investigate the hot deformation behavior and microstructural evolution of Ti60 titanium alloy under 940–1000 °C and strain rates of 5 ×10−4 s−1 × 10−2/s. First, a record‐breaking superplastic elongation… read more here.
Keywords: strain; ti60 titanium; strain rate; titanium alloy ... See more keywords
Machine Learning‐Based Prediction of High‐Strain‐Rate Response in Additively Manufactured Lattice Structures Using Split Hopkinson Pressure Bar Experiments
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202501406
Abstract: This study explores the predictive modeling of high‐strain‐rate mechanical behavior of additively manufactured lattice structures using machine learning (ML) and deep learning frameworks. Body‐centered‐cubic, gyroid, and honeycomb lattice architectures are fabricated using laser powder bed… read more here.
Keywords: strain; strain rate; high strain; pressure bar ... See more keywords
Mechanical properties of biaxially strained poly(l-lactide) tubes: Strain rate and temperature dependence
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45192
Abstract: Poly(l-lactide) (PLLA) is a bioabsorbable polymer with high stiffness and strength compared to the other commercially available bioabsorbable polymers. The properties of PLLA can be improved by straining, causing deformation-mediated molecular orientation. PLLA tubes were… read more here.
Keywords: strain; strain rate; mechanical properties; rate temperature ... See more keywords
Study on influence of additive and host ions on deformation characteristics of alkali halide crystals by strain‐rate cycling tests during the Blaha effect
Sign Up to like & getrecommendations! Published in 2017 at "Crystal Research and Technology"
DOI: 10.1002/crat.201600290
Abstract: Strain-rate cycling tests associated with ultrasonic oscillation were carried out between the strain rates (e) of 1.1×10−5 s−1 and 5.6×10−5 s−1 for NaBr:Li+ or K+ single crystals from 77 K up to the room temperature. Superposition… read more here.
Keywords: deformation; strain rate; rate; cycling tests ... See more keywords
Strain and strain rate echocardiography variables in adult Wilson's disease patients: A speckle tracking echocardiography study
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Clinical Ultrasound"
DOI: 10.1002/jcu.22849
Abstract: Although the hepatic and neurological consequences of Wilson's disease (WD) have been investigated in detail, its cardiac involvement remains little studied. Our aim was to investigate potential cardiac differences in strain (ST) and strain rate… read more here.
Keywords: wilson disease; strain rate; strain strain; echocardiography ... See more keywords
Relationship of changes in strain rate indices estimated from velocity‐encoded MR imaging to loss of muscle force following disuse atrophy
Sign Up to like & getrecommendations! Published in 2018 at "Magnetic Resonance in Medicine"
DOI: 10.1002/mrm.26759
Abstract: This study explores changes in strain rate (SR) (rate of regional deformation) parameters extracted from velocity‐encoded MRI and their relationship to muscle force loss following 4‐week unilateral lower limb suspension in healthy humans. read more here.
Keywords: changes strain; strain rate; rate; muscle force ... See more keywords
Impact of strain rate on mechanical properties of polylatic acid fabricated by fusion deposition modeling
Sign Up to like & getrecommendations! Published in 2024 at "Polymers for Advanced Technologies"
DOI: 10.1002/pat.6335
Abstract: The primary objective of this research is to investigate the impact of strain rate on the mechanical properties of polylactic acid (PLA) fabricated through fused deposition modeling. PLA material was fabricated in a grid pattern… read more here.
Keywords: speed min; strain rate; rate mechanical; min ... See more keywords
Establishment of strain rate‐dependent intrinsic models for short‐cut carbon fiber/nitrile composites in different pyrolysis states
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28343
Abstract: Flexible nozzle extension technology has been extensively researched throughout the world, but traditional materials cannot meet the growing demands in harsh environments. Short‐cut carbon fiber‐reinforced nitrile rubber (CF/NBR) composites, which are similar to the phenolic… read more here.
Keywords: carbon fiber; strain rate; carbon; cut carbon ... See more keywords