High Strength and High Toughness Electrospun Multifibrillar Yarns with Highly Aligned Hierarchy Intended as Anisotropic Extracellular Matrix.
Sign Up to like & getrecommendations! Published in 2022 at "Macromolecular bioscience"
DOI: 10.1002/mabi.202200291
Abstract: Electrospun nanofibers can be effectively used as a surrogate for extracellular matrices (ECMs). However, in the context of cellular mechanobiology, their mechanical performances could be enhanced by using nanofibrous materials with a high level of… read more here.
Keywords: high toughness; highly aligned; electrospun multifibrillar; multifibrillar yarns ... See more keywords
Matrix design of light weight, high strength, high ductility ECC
Sign Up to like & getrecommendations! Published in 2019 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2019.03.159
Abstract: Abstract In the past decade, the research on high strength, high ductility engineered cementitious composites (HSHD-ECC) has drawn much attention worldwide. However, due to the high matrix toughness associated with HSHD-ECC, saturated multiple cracking phenomena… read more here.
Keywords: hshd ecc; strength; high ductility; high strength ... See more keywords
Enhancing yield strength of high nitrogen austenitic stainless steel
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Constructional Steel Research"
DOI: 10.1016/j.jcsr.2021.106927
Abstract: Abstract Increasing the yield strength of high nitrogen austenitic stainless steel is important both scientifically and commercially. In this work, 18Mn18Cr0.6 N steel was cold rolled and annealed at 800 °C. the microstructure was investigated using electron… read more here.
Keywords: strength; microscopy; steel; strength high ... See more keywords
Development of a high strength and high ductility near β-Ti alloy with twinning induced plasticity effect
Sign Up to like & getrecommendations! Published in 2018 at "Scripta Materialia"
DOI: 10.1016/j.scriptamat.2018.07.012
Abstract: Abstract A multi-alloyed near β-Ti alloy Ti-6Cr-4Mo-2Al-2Sn-1Zr (Ti-64221) with high strength and high ductility was designed utilizing the d-electron theory combined with molybdenum equivalence approaches. Mechanical properties and microstructural evolution of the β-solution treated alloy… read more here.
Keywords: strength; high strength; near alloy; high ductility ... See more keywords
Effect of cryorolling on microstructure and property of high strength and high conductivity Cu−0.5wt.%Cr alloy
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(20)65393-6
Abstract: Abstract Cu−0.5wt.%Cr alloy with high strength and high conductivity was processed by cryorolling (CR) and room temperature rolling (RTR), respectively. The microstructure, mechanical property and electrical conductivity of Cu−0.5Cr alloy after CR/RTR and aging treatment… read more here.
Keywords: high strength; alloy; conductivity; property ... See more keywords
Graphene Interlocking Carbon Nanotubes for High-Strength and High-Conductivity Fibers.
Sign Up to like & getrecommendations! Published in 2023 at "ACS applied materials & interfaces"
DOI: 10.1021/acsami.2c21518
Abstract: Carbon nanotubes (CNTs) are promising building blocks for the fabrication of novel fibers with structural and functional properties. However, the mechanical and electrical performances of carbon nanotube fibers (CNTFs) are far lower than the intrinsic… read more here.
Keywords: carbon; carbon nanotubes; conductivity; strength high ... See more keywords
Identifying models of dielectric breakdown strength from high-throughput data via genetic programming
Sign Up to like & getrecommendations! Published in 2017 at "Scientific Reports"
DOI: 10.1038/s41598-017-17535-3
Abstract: The identification of models capable of rapidly predicting material properties enables rapid screening of large numbers of materials and facilitates the design of new materials. One of the leading challenges for computational researchers is determining… read more here.
Keywords: models dielectric; genetic programming; breakdown strength; dielectric breakdown ... See more keywords
Out-Plane Elastic-Plastic Buckling Strength of High-Strength Steel Arches
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Structural Engineering"
DOI: 10.1061/(asce)st.1943-541x.0002051
Abstract: AbstractLittle research has been reported for the out-plane elastic-plastic buckling strength of high-strength steel (HSS) arches and no adequate code provisions are available for their strength de... read more here.
Keywords: strength; strength high; plane elastic; plastic buckling ... See more keywords
Limpet teeth microstructure unites auxeticity with extreme strength and high stiffness.
Sign Up to like & getrecommendations! Published in 2022 at "Science advances"
DOI: 10.1126/sciadv.add4644
Abstract: Materials displaying negative Poisson's ratio, referred to as auxeticity, have been found in nature and created in engineering through various structural mechanisms. However, uniting auxeticity with high strength and high stiffness has been challenging. Here,… read more here.
Keywords: limpet teeth; microstructure; strength high; high stiffness ... See more keywords
Comparative effectiveness and safety of low-strength and high-strength direct oral anticoagulants compared with warfarin: a sequential cohort study
Sign Up to like & getrecommendations! Published in 2019 at "BMJ Open"
DOI: 10.1136/bmjopen-2018-026486
Abstract: Objectives The aim of this study was to compare effectiveness and safety of low-strength and high-strength direct oral anticoagulants (DOACs) with warfarin in the Australian Veteran population. Design Sequential cohort study using inverse probability of… read more here.
Keywords: strength; high strength; risk; low strength ... See more keywords
Luminescent Ionogels with Excellent Transparency, High Mechanical Strength, and High Conductivity
Sign Up to like & getrecommendations! Published in 2020 at "Nanomaterials"
DOI: 10.3390/nano10122521
Abstract: The paper describes a new kind of ionogel with both good mechanical strength and high conductivity synthesized by confining the ionic liquid (IL) 1-butyl-3-methylimidazolium bis(trifluoromethane sulfonyl)imide ([Bmim][NTf2]) within an organic–inorganic hybrid host. The organic–inorganic host… read more here.
Keywords: strength; ionogel; high conductivity; mechanical strength ... See more keywords