Study on the microstructure and properties of low-Ag Sn–0.3Ag–0.7Cu–0.5Ga solder alloys bearing Pr
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-6537-y
Abstract: Effect of Pr element on the wettability, microstructure, interface morphology and mechanical property of Sn–0.3Ag–0.7Cu–0.5Ga–xPr solder has been studied. The result exhibits that the wettability of solders could significantly be improved by adding an approximate… read more here.
Keywords: 7cu 5ga; study microstructure; 3ag 7cu; microstructure properties ... See more keywords
A comparative study on the microstructure and cycling stability of the amorphous and nanocrystallization Mg60Ni20La10 alloys
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Hydrogen Energy"
DOI: 10.1016/j.ijhydene.2018.08.129
Abstract: Abstract Amorphous and nanocrystalline Mg60Ni20La10 alloys were prepared by melt-spun and crystallization of the amorphous alloy respectively. Microstructural evolution of the amorphous and crystallized (CA) alloys during hydrogenation/dehydrogenation cycles was studied and compared in the… read more here.
Keywords: cycling stability; mg60ni20la10; microstructure cycling; comparative study ... See more keywords
Comparative study on microstructure and oxidation behaviour of ZrB2-20 vol% SiC ceramics reinforced with Si3N4/Ta additives
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2019.05.097
Abstract: Abstract Multi-stage Spark Plasma Sintering (MS-SPS) of ZrB 2 -20 vol% SiC-10 vol% Si 3 N 4 (ZSS) and ZrB 2 -20 vol% SiC-10 wt% Ta (ZST) composites were carried out at 1900 °C for 3 min to densify the ZrB… read more here.
Keywords: comparative study; oxidation; zrb; vol ... See more keywords
A comparative study on the microstructure and mechanical properties of fusion welded 9 Cr-1 Mo steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2019.12.053
Abstract: Abstract Modified 9 Cr–1 Mo is an ideal candidate preferred for high temperature applications in power plants. In this study, three P91 welds of 12 mm thickness are produced using Gas Tungsten Arc Welding (GTAW), Cold… read more here.
Keywords: comparative study; properties fusion; microstructure mechanical; study microstructure ... See more keywords
Study of the microstructure and the optical, electrical, and magnetic feature of the Dy2Bi2Fe4O12 ferromagnetic semiconductor
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.07.073
Abstract: Abstract With the aim to produce a material with magnetic and semiconductor properties, a lanthanide bismuth-ferrite type material is proposed in this work. Polycrystalline samples of Dy2Bi2Fe4O12 were produced following the standard solid-state reaction method.… read more here.
Keywords: feature; semiconductor; electrical magnetic; study microstructure ... See more keywords
Study of Microstructure and Hardness in A356 Aluminum Alloy Reinforced with Al2O3 and WC After Hot Extrusion.
Sign Up to like & getrecommendations! Published in 2020 at "Microscopy and Microanalysis"
DOI: 10.1017/s1431927620020826
Abstract: The A356 alloy system has as a principal alloying element the silicon, where the high levels of such element (4.0–13%) generate excellent casting characteristics [1]. In order to expand its application range, a method commonly… read more here.
Keywords: hardness a356; microstructure hardness; study microstructure; aluminum alloy ... See more keywords
Experimental and simulation study of microstructure and magnetic properties of (AlFeMnNi)1−x Nd x
Sign Up to like & getrecommendations! Published in 2023 at "Philosophical Magazine"
DOI: 10.1080/14786435.2023.2193911
Abstract: ABSTRACT The high-entropy alloy (Al25Fe30Mn25Ni20)1−x Nd x (all in at.%) (AlFeMnNi)1−x Nd x ) was prepared by vacuum arc melting (AM) and casting method (CM). X-Ray Diffraction (XRD) and Scanning Electron Microscopy, transmission electron microscope… read more here.
Keywords: magnetic properties; experimental simulation; simulation study; study microstructure ... See more keywords
A Study on Microstructure and Properties of PHS Fiber Laser Welded Joints Obtained in Air Atmospheres
Sign Up to like & getrecommendations! Published in 2018 at "Materials"
DOI: 10.3390/ma11071135
Abstract: Press-hardened steels (PHS) with a 1.5-mm-thick coated Al–Si layer is welded using an IPG YLS6000 continuous fiber laser in the air atmosphere. An SU5000 scanning electron microscope (SEM) and an Oxford EDS X-Max20 energy spectrometer… read more here.
Keywords: air; fiber laser; welded joints; study microstructure ... See more keywords
Study on the Microstructure, Mechanical Properties, and Erosive Wear Behavior of HVOF Sprayed Al2O3-15 wt.%TiO2 Coating with NiAl Interlayer on Al-Si Cast Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials"
DOI: 10.3390/ma13184122
Abstract: Alumina oxide coatings are widely used in many industrial applications to improve corrosion protection, wear and erosion resistances, and thermal insulation of metallic surfaces. The paper presents study of the microstructure, mechanical, and wear properties… read more here.
Keywords: alloy; sprayed al2o3; microstructure mechanical; al2o3 tio2 ... See more keywords