Influence of Substrate Temperature and Film Thickness on Thermal, Electrical, and Structural Properties of HPPMS and DC Magnetron Sputtered Ge Thin Films
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201600854
Abstract: Ge was deposited as thickness gradient films at temperatures up to 800C by direct current (DC) and high power pulsed magnetron sputtering (HPPMS). Structural characterization shows increased crystallization with increasing substrate temperature and film thickness.… read more here.
Keywords: temperature; substrate temperature; thickness thermal; film thickness ... See more keywords
Chemical Synthesis and Substrate Temperature Effect on Morphology of 2D Vanadium Disulfide
Sign Up to like & getrecommendations! Published in 2021 at "Crystal Research and Technology"
DOI: 10.1002/crat.202000184
Abstract: 2D metallic transition metal dichalcogenides exhibit plenty of intriguing physical properties such as magnetism, charge density wave, and superconductivity resulting in worldwide attention from condensed‐matter physicists over the last few decades. Herein, the chemical synthesis… read more here.
Keywords: synthesis; microscopy; substrate temperature; effect ... See more keywords
Microstructural and electrochemical supercapacitive properties of Cr‐doped CuO thin films: Effect of substrate temperature
Sign Up to like & getrecommendations! Published in 2021 at "International Journal of Energy Research"
DOI: 10.1002/er.7075
Abstract: Transition metal oxides have attracted a special interest in the applications of energy storage and conversion devices because of their distinctive structural, electronic, and catalytic properties. In the current study, the effect of substrate temperature… read more here.
Keywords: cuo thin; cuo; film; doped cuo ... See more keywords
Substrate temperature influenced ZrO2 films for MOS devices
Sign Up to like & getrecommendations! Published in 2020 at "Surface and Interface Analysis"
DOI: 10.1002/sia.6775
Abstract: The effect of substrate temperature on the direct current magnetron‐sputtered zirconium oxide (ZrO2) dielectric films was investigated. Stoichiometric of the ZrO2 thin films was obtained at an oxygen partial pressure of 4.0 × 10−2 Pa.… read more here.
Keywords: temperature influenced; substrate temperature; temperature; influenced zro2 ... See more keywords
Highly transparent and conductive indium-doped zinc oxide films deposited at low substrate temperature by spray pyrolysis from water-based solutions
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science"
DOI: 10.1007/s10853-017-1084-8
Abstract: In this paper, indium-doped zinc oxide (IZO) films were grown by spray pyrolysis, using zinc acetate and indium acetylacetonate precursors. The focus was on developing a solution recipe based on water as solvent, with only… read more here.
Keywords: spray pyrolysis; indium doped; substrate temperature; zinc oxide ... See more keywords
ZnO wrinkled nanostructures: enhanced BTX sensing
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-018-9238-2
Abstract: Zinc oxide nanostructured thin films were deposited at different substrate temperatures on a glass substrate with spray pyrolysis method. The effect of substrate temperature on microstructural, morphological, optical properties of the thin films has been… read more here.
Keywords: zno wrinkled; thin films; microscopy; substrate temperature ... See more keywords
Substrate temperature effect on microstructure, oxygen adsorption and ethanol sensing response of sprayed In2S3 films
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-02378-7
Abstract: This paper reports the effect of the substrate temperature of sprayed In2S3 material on the sensing response to ethanol. Glass substrates have been the supports of In2S3 thin films elaborated by spray pyrolysis technique. The… read more here.
Keywords: temperature; substrate temperature; sensing response; sprayed in2s3 ... See more keywords
Microstructural, optical and electrical properties of CdS thin films grown by spray pyrolysis technique as a function of substrate temperature
Sign Up to like & getrecommendations! Published in 2019 at "Optical and Quantum Electronics"
DOI: 10.1007/s11082-019-2081-8
Abstract: In this research, nanocrystalline cadmium sulfide thin films were produced by the spray pyrolysis technique on glass substrates. The effects of substrate temperature in the range 400–550 °C on the structural, morphological, optical, and electrical… read more here.
Keywords: thin films; spray pyrolysis; substrate temperature; optical electrical ... See more keywords
Effects of Substrate Temperature on Structural and Optical Properties of Spray-Pyrolyzed Cu(Ga0.3In0.7)Se2 Thin Films on Polyimide Plastic Substrate
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-017-5746-8
Abstract: Chalcopyrite copper indium gallium diselenide Cu(Ga0.3In0.7)Se2 films have been deposited on polyimide (PI) plastic substrate by chemical spray pyrolysis using different substrate temperatures in the range from 350°C to 395°C. The influence of substrate temperature… read more here.
Keywords: 3in0 se2; substrate temperature; ga0 3in0; plastic substrate ... See more keywords
Effect of Deposition Pressure, Nitrogen Content and Substrate Temperature on Optical and Mechanical Behavior of Nanocomposite Al-Si-N Hard Coatings for Solar Thermal Applications
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3730-y
Abstract: Hard and optically transparent nanocomposite Al-Si-N thin films were deposited using DC magnetron sputtering at different process parameters. There was a significant effect of these parameters on the film properties affecting its mechanical and optical… read more here.
Keywords: nitrogen; nitrogen content; substrate temperature; deposition pressure ... See more keywords
Controlling substrate temperature with infrared heating to improve mechanical properties of large-scale printed parts
Sign Up to like & getrecommendations! Published in 2020 at "Additive manufacturing"
DOI: 10.1016/j.addma.2020.101068
Abstract: Abstract Additively manufactured parts made with polymer extrusion techniques can be 50–75 % weaker in the z-direction (across layers) than in the x- and y-directions. This has been attributed to poor mobility of polymer chains… read more here.
Keywords: large scale; temperature; substrate temperature; mechanical properties ... See more keywords