A combined superconducting magnetic system with a uniform field of up to 20 T
Sign Up to like & getrecommendations! Published in 2020 at "Low Temperature Physics"
DOI: 10.1063/10.0001247
Abstract: A combined superconducting magnetic system with a uniform field of up to 20 T has been developed. The system contains several solenoidal sections and a magnetic flux concentrator consisting of hydroextruded dysprosium. The sections are wound… read more here.
Keywords: system; system uniform; magnetic system; field ... See more keywords
Efficient removal of fluoride from water using a paramagnetic adsorbent: FeAlOxHy combined with superconducting magnetic separation
Sign Up to like & getrecommendations! Published in 2017 at "Separation Science and Technology"
DOI: 10.1080/01496395.2016.1263661
Abstract: ABSTRACT The present study investigated fluoride removal by high-gradient superconducting magnetic separation (HGSMS) and paramagnetic adsorbents. FeAlOxHy adsorbents with different Fe/Al molar ratios were synthesized and characterized. The adsorption capacities of FeAlOxHy increased with increasing… read more here.
Keywords: magnetic separation; fealoxhy; separation; superconducting magnetic ... See more keywords
Superconducting magnetic bearings with bulks and 2G HTS stacks: comparison between simulations using H and A-V formulations with measurements
Sign Up to like & getrecommendations! Published in 2018 at "Superconductor Science and Technology"
DOI: 10.1088/1361-6668/aa9dc1
Abstract: A-V and H are two of the most widespread formulations applied in the literature to calculate current distribution in high-temperature superconductors (HTSs). Both formulations can successfully solve problems related to large-scale HTS applications, but the… read more here.
Keywords: magnetic bearings; hts stacks; formulation; bearings bulks ... See more keywords
Vertical and lateral drift behavior of a linear superconducting magnetic bearing system under multi-operating modes
Sign Up to like & getrecommendations! Published in 2020 at "Superconductor Science and Technology"
DOI: 10.1088/1361-6668/ab9540
Abstract: Since the discovery of high temperature superconducting (HTS) material, HTS maglev with the characteristics of self-stabilization and zero magnetic drag, has shown excellent potential for the future transportation application. However, this stability characteristic of HTS… read more here.
Keywords: drift; magnetic bearing; system; superconducting magnetic ... See more keywords
Effect of Parameters of an Electromagnetic Shunt Damper on Whirling Amplitude Reduction of a Rotor Supported by a Superconducting Magnetic Bearing
Sign Up to like & getrecommendations! Published in 2017 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2017.2653225
Abstract: A superconducting magnetic bearing can levitate a rotor without contact. However, the rotor can whirl with large amplitude. To reduce the whirling amplitude, we focused on an electromagnetic shunt damper that is appliable to a… read more here.
Keywords: electromagnetic shunt; rotor; superconducting magnetic; shunt damper ... See more keywords
Magnetic Shielding Capability of MgB2 Cup Made by Liquid Infiltration Process
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2019.2904471
Abstract: With the development of weak magnetic detection methods, the sensors, like superconducting quantum interference device (SQUID), become more and more sensitive. The magnetic shielding takes a more important part in weak signal detection systems than… read more here.
Keywords: superconducting magnetic; mgb2; shielding; magnetic shielding ... See more keywords
Experimental Characterization of the Temperature Influence on the Stiffness and Damping of a Field-Cooled Superconducting Magnetic Suspension
Sign Up to like & getrecommendations! Published in 2019 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2019.2915310
Abstract: Superconducting magnetic levitation has been used in contactless mechanical components for different applications like bearings or positioning devices. This technology is currently being investigated for its potential use as a vibration isolation and thermal disconnect… read more here.
Keywords: superconducting magnetic; superconducting levitation; field cooled; levitation ... See more keywords
Experimental Investigations of Novel Compound Bearing of Superconducting Magnetic Field and Hydrodynamic Fluid Field
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2019.2934443
Abstract: Long-life and high-reliability bearing is a key technology for developing the next generation of reusable liquid rocket turbopumps. We proposed a concept of superconducting compound bearing to combine the advantages of the superconducting magnetic field… read more here.
Keywords: superconducting magnetic; field; hydrodynamic fluid; compound ... See more keywords
Superconducting Magnetic Heterostructured Components for Electric Motor Applications
Sign Up to like & getrecommendations! Published in 2020 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2020.2969071
Abstract: Trapped flux magnets made by stacking high temperature superconducting tape portray an easy assembly with already available materials, high mechanical resistance, provided by the substrate and improved thermal stability, which enhances the trapped flux compared… read more here.
Keywords: superconducting magnetic; magnetic heterostructured; motor applications; heterostructured components ... See more keywords
Superconducting Magnetic Energy Storage for Pulsed Power Magnet Applications
Sign Up to like & getrecommendations! Published in 2023 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2023.3265620
Abstract: As part of the exploration of energy efficient and versatile power sources for future pulsed field magnets of the National High Magnetic Field Laboratory-Pulsed Field Facility (NHMFL-PFF) at Los Alamos National Laboratory (LANL), the feasibility… read more here.
Keywords: topology; magnet; energy; power ... See more keywords
Energy Storing and Fault Current Limiting in a Unified Superconducting Magnetic Device
Sign Up to like & getrecommendations! Published in 2023 at "IEEE Transactions on Applied Superconductivity"
DOI: 10.1109/tasc.2023.3273200
Abstract: This work describes a novel concept for unifying Superconducting Magnetic Energy Storage (SMES) and an inductive-type Fault Current Limiter (FCL). A single superconducting coil is used both as an energy source for the operation of… read more here.
Keywords: fault current; energy storing; energy; superconducting magnetic ... See more keywords