Assessment of melamine-coated MDF surface finish after peripheral milling under different cutting conditions
Sign Up to like & getrecommendations! Published in 2019 at "European Journal of Wood and Wood Products"
DOI: 10.1007/s00107-019-01413-y
Abstract: Milling is a machining process that is widely used in the furniture industry, since a good quality surface finish is essential. Produced MDF parts usually have aesthetic importance that is affected by poor surface finish… read more here.
Keywords: peripheral milling; surface; helix; melamine coated ... See more keywords
Electrochemical migration of Ni and ENIG surface finish during Environmental test contaminated by NaCl
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-7806-5
Abstract: The electrochemical migration (ECM) mechanism occurs at the presence of moisture in the case of operating circuits and results in shorts (dendrites) between adjacent conductor lines/traces. Dendrite growth occurs as a result of metal ions… read more here.
Keywords: enig surface; surface; electrochemical migration; test ... See more keywords
Effect of stress and surface finish on Pb-caustic SCC of alloy 690TT
Sign Up to like & getrecommendations! Published in 2021 at "Corrosion Science"
DOI: 10.1016/j.corsci.2021.109462
Abstract: Abstract The effect of surface preparation on lead-induced stress corrosion cracking (PbSCC) of Alloy 690 T T in Pb-caustic solution was investigated using C-rings manufactured from tubing that was either as-manufactured or polished. The surface deformed layer… read more here.
Keywords: stress surface; surface; surface finish; effect stress ... See more keywords
Role of textured tool in improving machining performance: A review
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2019.04.011
Abstract: Abstract Machining is basically defined as a process of gradual material removal used to finish materials of desired surface finish and dimensional accuracy. For achieving the desired surface finish and dimensional accuracy every machining operation… read more here.
Keywords: textured tool; surface finish; surface; cutting fluids ... See more keywords
Surface finish analysis of wire electric discharge machined specimens by RSM and ANN modeling
Sign Up to like & getrecommendations! Published in 2019 at "Measurement"
DOI: 10.1016/j.measurement.2019.01.044
Abstract: Abstract This study discusses the experimental investigation on WEDM of combustor material (i.e. nimonic 263). Experimentation has been executed by varying pulse-on time (Ton), pulse-off time (Toff), peak current (Ip) and spark gap voltage (Sv).… read more here.
Keywords: surface finish; surface; pulse time; discharge ... See more keywords
Machining of dental Alloys: Evaluating the surface finish of laterally milled Co-Cr-Mo Alloy
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.09.002
Abstract: Abstract The surface finish of multiple machined dental alloy specimens has been compared. The dental alloy used in this investigation was cobalt-chromium-molybdenum (Co-Cr-Mo), a popular biomedical material commonly found in artificial joints and orthopaedic implants.… read more here.
Keywords: alloy; dental alloys; surface; machining dental ... See more keywords
Rolling fatigue life of PM steel with different porosity and surface finish
Sign Up to like & getrecommendations! Published in 2019 at "Wear"
DOI: 10.1016/j.wear.2019.01.006
Abstract: Abstract Gears made of PM steel are of interest for the automotive industry because they can be produced to near net shape with only a few processing steps. Automotive gears experience a complex contact situation… read more here.
Keywords: steel; surface finish; surface; density ... See more keywords
A comparative study on the surface finish achieved during turning operation of AISI 4340 steel in flooded, near-dry and dry conditions
Sign Up to like & getrecommendations! Published in 2018 at "Australian Journal of Mechanical Engineering"
DOI: 10.1080/14484846.2018.1546363
Abstract: ABSTRACT The objective of this study is to analyse the surface finish achieved during turning of AISI 4340 cylindrical steel components in three machining conditions namely, flooded, near-dry and dry conditions with three separate CNMG… read more here.
Keywords: surface; study; finish achieved; achieved turning ... See more keywords
On improving the surface finish of 3D printing polylactic acid parts by corundum blasting
Sign Up to like & getrecommendations! Published in 2021 at "Rapid Prototyping Journal"
DOI: 10.1108/rpj-05-2021-0105
Abstract: Purpose Fused filament fabrication or fused deposition modeling (FFF/FDM) has as one of its main restrictions the surface quality intrinsic to the process, especially linked to the layer thickness used during manufacture. The purpose of… read more here.
Keywords: corundum blasting; polylactic acid; improving surface; surface finish ... See more keywords
FRACTAL-BASED ANALYSIS OF THE RELATIONSHIP BETWEEN THE SURFACE FINISH OF WORKPIECE AND CHIP FORMATION IN MILLING OPERATION
Sign Up to like & getrecommendations! Published in 2020 at "Fractals"
DOI: 10.1142/s0218348x20500991
Abstract: Surface finish is one of the most important issues that is discussed in machining of materials. In fact, reaching the required surface finish is the key scale in analysis of the quality of machined... read more here.
Keywords: fractal based; surface; analysis relationship; based analysis ... See more keywords
Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates
Sign Up to like & getrecommendations! Published in 2017 at "Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications"
DOI: 10.1177/1464420716671970
Abstract: Natural fibers, and more particularly, flax fibers, have a considerable potential as replacements for synthetic fibers. These fibers are of significant economic and environmental interest because they are natural products, are biodegradable, and unlike synthetic… read more here.
Keywords: synthetic fibers; flax epoxy; composite laminates; cutting forces ... See more keywords