Industrially scalable surface treatments to enhance the current density output from graphite bioanodes fueled by real domestic wastewater
Sign Up to like & getrecommendations! Published in 2021 at "iScience"
DOI: 10.1016/j.isci.2021.102162
Abstract: Summary Acid and electrochemical surface treatments of graphite electrode, used individually or in combination, significantly improved the microbial anode current production, by +17% to +56%, in well-regulated and duplicated electroanalytical experimental systems. Of all the… read more here.
Keywords: surface treatments; surface; industrially scalable; domestic wastewater ... See more keywords
Reading ceramic surfaces: Characterisation of surface treatments towards functional identification of vases
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Archaeological Science: Reports"
DOI: 10.1016/j.jasrep.2021.103021
Abstract: Abstract This study explores the characterisation of clay vases surfaces through tribological analysis and more precisely the relationship between surface treatments and watertightness. Different surface treatments were tested (pre-firing: smoothing with a wet hand, a… read more here.
Keywords: ceramic surfaces; surface; characterisation surface; reading ceramic ... See more keywords
CAD-CAM milled versus pressed lithium-disilicate monolithic crowns adhesively cemented after distinct surface treatments: Fatigue performance and ceramic surface characteristics.
Sign Up to like & getrecommendations! Published in 2019 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2019.03.005
Abstract: To evaluate the fatigue failure load (FFL), number of cycles for failure (CFF) and survival probabilities of lithium-disilicate (LD) monolithic crowns manufactured by two processing techniques (pressing vs. CAD/CAM) adhesively cemented to a dentin-analogue material,… read more here.
Keywords: surface treatments; surface; monolithic crowns; lithium disilicate ... See more keywords
Surface treatments and its effects on the fatigue behavior of a 5% mol yttria partially stabilized zirconia material.
Sign Up to like & getrecommendations! Published in 2021 at "Journal of the mechanical behavior of biomedical materials"
DOI: 10.1016/j.jmbbm.2021.104543
Abstract: This study evaluated the effect of distinct surface treatments on the fatigue behavior (biaxial flexural fatigue testing) and surface characteristics (topography and roughness) of a 5% mol yttria partially stabilized zirconia ceramic (5Y-PSZ). Disc-shaped specimens… read more here.
Keywords: topography; surface treatments; surface; fatigue behavior ... See more keywords
Effects of corrosion-inhibiting surface treatments on irradiated microstructure development in Ni-base alloy 718
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Nuclear Materials"
DOI: 10.1016/j.jnucmat.2018.10.006
Abstract: Abstract The objective of this study is to understand the influence of surface treatments, namely laser shock peening (LSP) and ultrasonic nanocrystal surface modification (UNSM), on the irradiation tolerance of a Ni-base alloy. Surface treatments… read more here.
Keywords: irradiation; surface treatments; surface; base alloy ... See more keywords
Thin coatings for fire protection: An overview of the existing strategies, with an emphasis on layer-by-layer surface treatments and promising new solutions
Sign Up to like & getrecommendations! Published in 2021 at "Progress in Organic Coatings"
DOI: 10.1016/j.porgcoat.2021.106217
Abstract: Abstract Catastrophes due to fires cause a lot of material damages and the loss of many human lives. They have been rising in number and severity over the years because of the extensive use of… read more here.
Keywords: coatings fire; thin coatings; fire; layer ... See more keywords
Surface treatments for boriding of Ti6Al4V alloy in view of applications as a biomaterial
Sign Up to like & getrecommendations! Published in 2018 at "Tribology International"
DOI: 10.1016/j.triboint.2018.05.006
Abstract: Abstract Even if Ti6Al4V has great biocompatibility, it cannot be used for several components of joint implants because of low wear and fretting resistance. This research is focused on improving the bio-tribological characteristics of Ti6Al4V… read more here.
Keywords: treatments boriding; ti6al4v alloy; surface treatments; surface ... See more keywords
Quantification of Effects of Bitumen Surface Treatments on Material Properties of Existing Asphalt Pavement
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials in Civil Engineering"
DOI: 10.1061/(asce)mt.1943-5533.0001789
Abstract: AbstractBituminous surface treatments (BSTs), or chip seals, can be placed soon after (e.g., within 1 year) the underlying asphalt layer is paved, toward the end of the life of the existing asphalt... read more here.
Keywords: surface treatments; quantification effects; existing asphalt; effects bitumen ... See more keywords
Assessment of airborne nanoparticles present in industry of aluminum surface treatments
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Occupational and Environmental Hygiene"
DOI: 10.1080/15459624.2016.1254782
Abstract: ABSTRACT Conventional industrial processes are emission sources of unintended nanoparticles which are potentially harmful for the environment and human health. The aim of this study is to assess airborne nanoparticle release from aluminum surface treatment… read more here.
Keywords: surface area; surface treatments; surface; area ... See more keywords
Surface Treatments for Spinal Implants: A Biological Perspective.
Sign Up to like & getrecommendations! Published in 2018 at "Spine"
DOI: 10.1097/brs.0000000000002572
Abstract: he first few weeks during which inflammation and T revascularization occur are likely the most critical ones to bone healing. Surface, chemical, and structural modifications can be made to encourage early granulation formation, and to… read more here.
Keywords: spinal implants; surface treatments; surface; biological perspective ... See more keywords
Experimental evaluation of the bond Between concrete and GFRP bars with different surface treatments
Sign Up to like & getrecommendations! Published in 2022 at "Journal of Composite Materials"
DOI: 10.1177/00219983221114695
Abstract: The bond between glass fiber-reinforced polymers (GFRPs) and steel reinforcements to concrete is investigated in this study. The experimental program includes two different testing methods (beam tests and pull-out tests) on three different types of… read more here.
Keywords: surface treatments; gfrp bars; experimental evaluation; bond ... See more keywords