Articles with "tape casting" as a keyword



Photo from archive.org

Enhanced Soft Character of Crystallographically Textured Mn-Doped Binary 0.675[Pb(Mg1/3Nb2/3)O3]–0.325[PbTiO3] Ceramics

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Electronic Materials"

DOI: 10.1007/s11664-018-6563-4

Abstract: Lead magnesium niobate (PMN)–lead titanate (PT) solid solution with composition 0.675 PMN–0.325PT has been obtained with manganese (Mn) doping in various ratios. The effect of Mn on the electrical properties was examined in detail using… read more here.

Keywords: textured doped; crystallographically textured; soft character; character crystallographically ... See more keywords
Photo by primal_harmony from unsplash

Porous Al2O3 plates prepared by combing foaming and gel-tape casting methods for efficient collection of oil from water

Sign Up to like & get
recommendations!
Published in 2019 at "Chemical Engineering Journal"

DOI: 10.1016/j.cej.2019.03.218

Abstract: Abstract Absorbent materials are considered as the most effective way of dealing with oil spill accidents and the increasing industrial oily wastewater leakages. However, poor recycling ability and low efficiency limit their application. This paper… read more here.

Keywords: al2o3 plates; gel tape; oil; foaming gel ... See more keywords
Photo from wikipedia

High performance multi-layer varistor (MLV) from doped ZnO nanopowders by water based tape casting: Rheology, sintering, microstructure and properties

Sign Up to like & get
recommendations!
Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.01.218

Abstract: Abstract In this work, we report the fabrication of a high performance multi-layer varistor (MLV) via water based tape casting method using novel compositions of nanomaterials. Bi2O3, CaO and Co3O4 doped ZnO nanopowders were prepared… read more here.

Keywords: water; tape casting; rheology; mlv ... See more keywords
Photo from wikipedia

Bi4Ti3O12 multilayered ceramic tapes produced by aqueous tape casting and laminating process: Structural and dielectric properties

Sign Up to like & get
recommendations!
Published in 2018 at "Ceramics International"

DOI: 10.1016/j.ceramint.2018.05.146

Abstract: Abstract In this work, multilayered bismuth titanate ceramic tapes engineered by combining aqueous tape casting and laminating process were produced. The structural and dielectric properties of green and sintered multilayered materials, with 1–5 layers, were explored.… read more here.

Keywords: aqueous tape; structural dielectric; tape casting; dielectric properties ... See more keywords
Photo from archive.org

Tape casting of polysiloxane-derived ceramic with controlled porosity and surface properties

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of the European Ceramic Society"

DOI: 10.1016/j.jeurceramsoc.2018.07.016

Abstract: Abstract Tape casting has been applied to produce porous hybrid and SiOC ceramic tapes using ceramic precursors and commercially available polysiloxanes as polymeric binders. SiC particles of two different mean sizes (4.5 or 6.5 μm) were… read more here.

Keywords: porosity; polysiloxane derived; tape casting; surface ... See more keywords
Photo by dudek from unsplash

Thermoelectric properties of La3+ and Ce3+ co-doped CaMnO3 prepared by tape casting

Sign Up to like & get
recommendations!
Published in 2020 at "Journal of The European Ceramic Society"

DOI: 10.1016/j.jeurceramsoc.2019.08.021

Abstract: Abstract The structural and thermoelectric transport properties of Ca0.9La0.1–xCexMnO3–δ (x = 0 – 0.1) prepared through tape casting process were investigated. The thermoelectric transport properties of CaMnO3 were optimized by the La3+ and Ce3+ co-doping… read more here.

Keywords: la3 ce3; thermoelectric transport; tape; tape casting ... See more keywords
Photo by dudek from unsplash

Effect of flash sintering on microstructure of Ce0.9Gd0.1O1.95 electrolyte fabricated by tape-casting

Sign Up to like & get
recommendations!
Published in 2017 at "Materials Letters"

DOI: 10.1016/j.matlet.2017.07.129

Abstract: Abstract Flash sintering technique was applied to Ce 0.9 Gd 0.1 O 1.95 (10GDC) electrolyte fabricated by tape-casting at different temperatures under various electric fields. Densification of the electrolyte at constant electric field depended mainly… read more here.

Keywords: flash; tape casting; fabricated tape; flash sintering ... See more keywords

Manufacturing of Ti-10Nb based metal sheets by tape casting

Sign Up to like & get
recommendations!
Published in 2019 at "Materials Letters"

DOI: 10.1016/j.matlet.2018.11.109

Abstract: Abstract Sheets from Ti alloys like Ti-Nb are attractive as structural and functional components for applications in aerospace, biomedicine or electrochemical devices. Tape casting is a cost-effective production method, which has been widely used for… read more here.

Keywords: metal sheets; manufacturing 10nb; production; based metal ... See more keywords
Photo from archive.org

Tape casting fabrication and properties of planar waveguide YAG/Yb:YAG/YAG transparent ceramics

Sign Up to like & get
recommendations!
Published in 2017 at "Optical Materials"

DOI: 10.1016/j.optmat.2017.04.032

Abstract: Abstract Highly transparent YAG/10at.%Yb:YAG/YAG planar waveguide ceramics were fabricated by the non-aqueous tape casting and solid-state reactive sintering technology. The tapes are relatively homogeneous and the green body shows a dense structure without distinct interfaces… read more here.

Keywords: yag yag; tape casting; 10at yag; yag ... See more keywords
Photo from wikipedia

Aqueous-based tape casting of multilayer transparent Nd:YAG ceramics

Sign Up to like & get
recommendations!
Published in 2019 at "Optical Materials"

DOI: 10.1016/j.optmat.2019.01.060

Abstract: Abstract Transparent multilayer Nd:YAG ceramics were successfully fabricated by employing an ISOBAM-aqueous tape casting system, followed by oxygen sintering. Homogenous and flexible green tapes were obtained after drying the tapes for >24 h at room temperature in… read more here.

Keywords: transparent; aqueous based; tape casting; yag ceramics ... See more keywords
Photo from wikipedia

Effect of co-sintering time on magnetoelectric response of Pb0.895Sr0.06La0.03(Zr0.56,Ti0.44)O3 multilayer–Ni0.6Zn0.4Fe2O4 composite fabricated by tape casting

Sign Up to like & get
recommendations!
Published in 2019 at "Journal of Applied Physics"

DOI: 10.1063/1.5099299

Abstract: The effect of cosintering time on magnetoelectric (ME) behavior of Sr, La doped lead zirconate titanate multilayer–nickel zinc ferrite composites fabricated by the tape-casting method has been investigated. Powders of individual phases, viz., Pb(1 − x − 3y/2)SrxLay(Zrz,Ti(1 − z))O3 (PSLZT)… read more here.

Keywords: tape casting; time; sintering time; fabricated tape ... See more keywords