A Study on the Mechanism of the Effect of Low‐Frequency High‐Density Pulse Current on the Strength and Ductility of TC4 Titanium Alloy
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202500552
Abstract: The electrically assisted forming technique has attracted significant attention in recent years as an effective method for enhancing the formability of TC4 alloys. It has been demonstrated that localized overheating during the tensile deformation process… read more here.
Keywords: dislocation; high density; density; tc4 ... See more keywords
Strengthening the ZrC-SiC ceramic and TC4 alloy brazed joint using laser additive manufactured functionally graded material layers
Sign Up to like & getrecommendations! Published in 2018 at "Ceramics International"
DOI: 10.1016/j.ceramint.2018.03.087
Abstract: Abstract In order to improve the ZrC-SiC and TC4 brazed joint property, functionally graded material (FGM) layers (two SiC particles reinforced TC4-based composite layers) were designed to relieve the residual stress in the ZrC-SiC and… read more here.
Keywords: sic ceramic; tc4; zrc sic; brazed joint ... See more keywords
Trans-crocin 4 is not hydrolyzed to crocetin following i.p. administration in mice, while it shows penetration through the blood brain barrier.
Sign Up to like & getrecommendations! Published in 2018 at "Fitoterapia"
DOI: 10.1016/j.fitote.2018.06.012
Abstract: A novel, fit-for-purpose, highly sensitive, analytical UPLC-PDA methodology was developed and fully validated, according to ICH, FDA and EMA guidelines, for the rapid and accurate quantification of trans-crocin 4 (TC4) and crocetin (CRC) in mice… read more here.
Keywords: trans crocin; methodology; administration; blood brain ... See more keywords
Fabrication of highly dissimilar TC4/steel joint with V/Cu composite transition layer by laser melting deposition
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.158319
Abstract: Abstract The high production flexibility of laser additive manufacturing is a significant advantage in the fabrication of functionally graded materials such as TC4 alloy and 30CrNi2MoVA steel, which have applications in the nuclear and aerospace… read more here.
Keywords: steel; tc4; laser melting; layer ... See more keywords
Effects of hot extrusion on microstructure and mechanical properties of Mg matrix composite reinforced with deformable TC4 particles
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Magnesium and Alloys"
DOI: 10.1016/j.jma.2019.05.015
Abstract: Abstract Mg matrix composites were often reinforced by non-deformable ceramic particles. In this paper, a novel Mg matrix composite reinforced with deformable TC4 (Ti–6Al–4 V) particles was fabricated and then extruded. The evolutions of microstructure and… read more here.
Keywords: hot extrusion; tc4; tc4 particles; mechanical properties ... See more keywords
Microstructural characteristics and formation mechanism of laser cladding of titanium alloys on carbon fiber reinforced thermoplastics
Sign Up to like & getrecommendations! Published in 2017 at "Materials Letters"
DOI: 10.1016/j.matlet.2017.02.102
Abstract: TC4 coating was successfully prepared on the surface of carbon fiber reinforced thermoplastics (CFRP) via laser cladding technology. The microstructure of the TC4 coating/CFRP substrate interface was analyzed. The results indicated that the molten TC4… read more here.
Keywords: carbon fiber; tc4; fiber reinforced; cfrp substrate ... See more keywords
Influence of microstructure of TC4 substrate on the MAO coating
Sign Up to like & getrecommendations! Published in 2019 at "Surface Engineering"
DOI: 10.1080/02670844.2019.1693732
Abstract: ABSTRACT The influence of microstructures of the two TC4 substrates on the growth process and properties of micro-arc oxidation (MAO) coatings were investigated and compared. The morphologies, thickness, roughness and compositions of the coatings on… read more here.
Keywords: microscopy; tc4; mao coating; mao ... See more keywords
Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17153745
Abstract: In order to address the issues of excessive brittle intermetallic compounds (IMC) formation in the TC4 brazed joints, two types of novel Ti-Zr-Cu-Ni-Sn amorphous braze fillers were designed. The microstructure and shear strength of the… read more here.
Keywords: braze; brazed joints; braze fillers; amorphous braze ... See more keywords
The High-Strain-Rate Impacts Behaviors of Bilayer TC4-(GNPs/TC4) Composites with a Hierarchical Microstructure
Sign Up to like & getrecommendations! Published in 2024 at "Materials"
DOI: 10.3390/ma17225589
Abstract: Ti matrix composites (TMCs) are promising structural materials that meet the increasing demands for light weight the automobile and aircraft industries. However, the room temperature brittleness in the traditionally homogeneous reinforcement distribution of TMCs limits… read more here.
Keywords: tc4 gnps; strain rate; gnps tc4; high strain ... See more keywords
Simultaneous Improvement in Strength and Ductility of TC4 Matrix Composites Reinforced with Ti1400 Alloy and In Situ-Synthesized TiC
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13050965
Abstract: To overcome the tradeoff between strength and ductility of materials and obtain titanium matrix composites with excellent mechanical properties, in this study, the in situ-synthesized TiC particles and Ti-Al-V-Mo-Cr (Ti1400) alloy-reinforced Ti6Al4V (TC4) matrix composites… read more here.
Keywords: strength; tic tc4; ti1400 alloy; tc4 ... See more keywords