Influence of Y2O3 on the microstructure and tribological properties of Ti-based wear-resistant laser-clad layers on TC4 alloy
Sign Up to like & getrecommendations! Published in 2020 at "Ceramics International"
DOI: 10.1016/j.ceramint.2020.02.159
Abstract: Abstract Multi-track Ti-based wear-resistant composite coatings were fabricated on TC4 alloy surfaces using laser-clad TC4 + Ni45 + Co–WC mixed powders with different Y2O3 contents (0, 1, and 3 wt%). The microstructure, microhardness, and tribological properties of the coatings were… read more here.
Keywords: y2o3; laser clad; based wear; tc4 alloy ... See more keywords
Ultrafine duplex microstructure and excellent mechanical properties of TC4 alloy via a novel thermo-mechanical treatment
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.07.141
Abstract: Abstract Combined with the decomposition of martensitic phase and the globularization of close-packed hexagonal α phase, TC4 alloy with ultrafine duplex microstructure and excellent mechanical properties is prepared by using a novel thermo-mechanical technique of… read more here.
Keywords: phase; ultrafine duplex; treatment; duplex microstructure ... See more keywords
Effect of tungsten micro-scale dispersed particles on the microstructure and mechanical properties of Ti–6Al–4V alloy
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.156847
Abstract: Abstract Ti–6Al–4V (TC4) alloy and Ti–6Al–4V-5 wt.%W (TC4-5%W) alloy were fabricated by spark plasma sintering (SPS). The crystalline structure and microstructure of both TC4 alloy and TC4-5%W alloy were confirmed using X-ray diffraction (XRD) technique,… read more here.
Keywords: strength; alloy; microscopy; dispersed particles ... See more keywords
Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Cleaner Production"
DOI: 10.1016/j.jclepro.2018.11.147
Abstract: Abstract Minimum Quantity Lubrication has been widely used in the titanium alloy milling process as an advanced and clean means of cooling and lubrication. The Minimum Quantity Lubrication parameters have a significant influence on the… read more here.
Keywords: tc4 alloy; milling characteristics; lubrication; quantity lubrication ... See more keywords
Vacuum brazing ZSCf composite ceramics to TC4 alloy with Ag-Cu filler
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.05.119
Abstract: Abstract In this study, the carbon fiber reinforced ZrB2-SiC composite ceramic was joined to Ti6Al4V alloy with Ag-Cu eutectic alloy filler at varied holding time and a fixed temperature of 800℃. Interface microstructure and shear… read more here.
Keywords: zscf; alloy filler; tc4 alloy; holding time ... See more keywords
Mechanical performance and failure modes of self-piercing riveted joints between AA6061 and solution-treated TC4 alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials Research Express"
DOI: 10.1088/2053-1591/acd6da
Abstract: TC4 titanium alloy and AA6061 aluminum alloy are widely used in the transportation industry because of their excellent mechanical properties and lightweight. In this work, the TC4 titanium alloy was solution heat treated between 800… read more here.
Keywords: titanium alloy; tc4 alloy; tc4 titanium; solution ... See more keywords
Enhancing Osseointegration of TC4 Alloy by Surficial Activation Through Biomineralization Method
Sign Up to like & getrecommendations! Published in 2021 at "Frontiers in Bioengineering and Biotechnology"
DOI: 10.3389/fbioe.2021.639835
Abstract: Titanium (Ti) alloys have been applied to biomedical implants for a long time. Although Ti alloys are biocompatible, efforts have been continuously made to improve their bone conductivity and osteogenesis for enhancing their performance. Silk… read more here.
Keywords: osseointegration tc4; alloy; enhancing osseointegration; alloy surficial ... See more keywords
Study of Wear and Corrosion Resistance of Cold Sprayed TC4 Coating on the Surface of Mg-Li Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Coatings"
DOI: 10.3390/coatings13060988
Abstract: Mg-Li alloys have achieved vital applications in aerospace, automotive, and 3C fields for their prominent properties. However, the Mg-Li alloy exhibits poor corrosion and wear resistance due to the high activity of Mg and Li… read more here.
Keywords: tc4 alloy; resistance; cold sprayed; sprayed tc4 ... See more keywords
Effect of Laser Micro-Texturing on Laser Joining of Carbon Fiber Reinforced Thermosetting Composites to TC4 Alloy
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma16010270
Abstract: Carbon fiber reinforced thermosetting composites (CFRTS) and TC4 alloy are important structural materials for lightweight manufacturing. The hybrid structure of these two materials has been widely used in the aerospace field. However, the CFRTS-TC4 alloy… read more here.
Keywords: laser micro; cfrts tc4; laser; tc4 alloy ... See more keywords