The effect of heat treatment on α/ β phases evolution of TC4 titanium alloy fabricated by spark plasma sintering
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.08.128
Abstract: Abstract The spark plasma sintered (SPS) TC4 titanium alloy was deformed at deformation temperature of 900℃ and 1000℃ on Gleeble-1500D thermal simulator, and then the microstructure and α/ β phases evolution at different heat treatment… read more here.
Keywords: phase; titanium alloy; temperature; tc4 titanium ... See more keywords
Mechanical performance and failure modes of self-piercing riveted joints between AA6061 and solution-treated TC4 alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials Research Express"
DOI: 10.1088/2053-1591/acd6da
Abstract: TC4 titanium alloy and AA6061 aluminum alloy are widely used in the transportation industry because of their excellent mechanical properties and lightweight. In this work, the TC4 titanium alloy was solution heat treated between 800… read more here.
Keywords: titanium alloy; tc4 alloy; tc4 titanium; solution ... See more keywords
Experimental Study on Forged TC4 Titanium Alloy Fatigue Properties under Three-Point Bending and Life Prediction
Sign Up to like & getrecommendations! Published in 2021 at "Materials"
DOI: 10.3390/ma14185329
Abstract: Ultrasonic fatigue tests of TC4 titanium alloy equiaxed I, II and bimodal I, II obtained by different forging processes were carried out in the range from 105 to 109 cycles using 20 kHz three-point bending.… read more here.
Keywords: titanium alloy; fatigue properties; tc4 titanium; fatigue ... See more keywords
Research on Underwater Wet Laser Self-Fusion Welding Process and Analysis of Microstructure and Properties of TC4 Titanium Alloy Weld
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15093380
Abstract: In order to explore the feasibility of underwater wet laser welding of the TC4 titanium alloy, research on the underwater laser self-fusion welding process was carried out. The weld structure and mechanical properties in both… read more here.
Keywords: underwater; titanium alloy; underwater wet; tc4 titanium ... See more keywords
Mechanical Properties and Fracture Behavior of a TC4 Titanium Alloy Sheet
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15238589
Abstract: TC4 titanium alloy has excellent comprehensive properties. Due to its light weight, high specific strength, and good corrosion resistance, it is widely used in aerospace, military defense, and other fields. Given that titanium alloy components… read more here.
Keywords: behavior tc4; titanium alloy; tc4 titanium; fracture behavior ... See more keywords
Corrosion Behavior of TiMoNbX (X = Ta, Cr, Zr) Refractory High Entropy Alloy Coating Prepared by Laser Cladding Based on TC4 Titanium Alloy
Sign Up to like & getrecommendations! Published in 2023 at "Materials"
DOI: 10.3390/ma16103860
Abstract: TiMoNbX (X = Cr, Ta, Zr) RHEA coatings were fabricated on TC4 titanium alloy substrate using laser cladding technology. The microstructure and corrosion resistance of the RHEA were studied by XRD, SEM and an electrochemical… read more here.
Keywords: rhea; titanium alloy; tc4 titanium; corrosion ... See more keywords
Study on the CBN Wheel Wear Mechanism of Longitudinal-Torsional Ultrasonic-Assisted Grinding Applied to TC4 Titanium Alloy
Sign Up to like & getrecommendations! Published in 2022 at "Micromachines"
DOI: 10.3390/mi13091480
Abstract: In this study, the CBN (cubic boron nitride) wheel wear model of TC4 titanium alloy in longitudinal-torsional ultrasonic-assisted grinding (LTUAG) was established to explore the grinding wheel wear pattern of TC4 titanium alloy in LTUAG… read more here.
Keywords: wheel; model; titanium alloy; tc4 titanium ... See more keywords
Effect of Cr2O3 on the Microstructure and Oxidation Resistance of Enamel Coating with TC4 Titanium Alloy
Sign Up to like & getrecommendations! Published in 2019 at "Materials Science"
DOI: 10.5755/j01.ms.26.2.21291
Abstract: By adding 0 % to 50 % Cr2O3 ceramic particles, the enamel composite coating is produced on the surface of TC4 titanium alloys. The detection analysis indicates that with the increase of the amount of Cr2O3 particles… read more here.
Keywords: particles added; tc4 titanium; enamel coating; oxidation resistance ... See more keywords