The influence of laser engineered net shaping (LENS™) technological parameters on the laser deposition efficiency and properties of H13 (AISI) steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2020.153840
Abstract: Abstract A successful attempt at laser cladding of H13 (AISI) hot work tool steel by the laser engineered net shaping technique is presented. Technological parameters, such as laser spot diameter, powder flow rate, and deposition… read more here.
Keywords: laser; h13 aisi; laser engineered; deposition ... See more keywords
Effect of technological parameters on densification of reaction bonded Si/SiC ceramics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of the European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2018.07.014
Abstract: Abstract Si/SiC composite ceramics was produced by reaction sintering method in process of molten silicon infiltration into porous C/SiC preform fabricated by powder injection molding followed by impregnation with phenolic resin and carbonization. To optimize… read more here.
Keywords: sic ceramics; effect technological; technological parameters; reaction ... See more keywords
Identification of Technological Parameters when Machining Ni-Alloys by Monolithic Ceramic Milling Tool
Sign Up to like & getrecommendations! Published in 2017 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2017.11.006
Abstract: Abstract Increasing productivity and usage of hard-to-machine progressive materials are the cause of continual finding of new ways and methods of machining in order to ensure the required quality especially in aviation and aerospace industry.… read more here.
Keywords: quality; tool; technological parameters; identification ... See more keywords
THE EFFECT OF TECHNOLOGICAL PARAMETERS ON THE CHANGE IN SURFACE MICROHARDNESS DURING THE EXTERNAL CYLINDRICAL BURNISHING OF X5CRNI18-10 STEEL WORKPIECES
Sign Up to like & getrecommendations! Published in 2025 at "MM Science Journal"
DOI: 10.17973/mmsj.2025_06_2025034
Abstract: Among the finishing machining operations, burnishing is an economical process with a low environmental impact. In special cases, grinding can be replaced by burnishing, creating the same roughness with a much lower environmental load. The… read more here.
Keywords: steel; parameters change; surface; effect technological ... See more keywords
Nutritional Value and Technological Parameters of Milk From Organic and Conventional Farms in Poland
Sign Up to like & getrecommendations! Published in 2024 at "Annals of Animal Science"
DOI: 10.2478/aoas-2024-0008
Abstract: Abstract The aim of the study was to assess the nutritional value and technological parameters of milk produced in organic and conventional farming systems, taking into account the breeds of cow, feeding system, and season… read more here.
Keywords: parameters milk; organic conventional; nutritional value; milk ... See more keywords
Determination of technological parameters for hydromechanical amber extraction in the Polissia region of Ukraine
Sign Up to like & getrecommendations! Published in 2024 at "Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu"
DOI: 10.33271/nvngu/2024-3/027
Abstract: Purpose. To develop and substantiate an effective methodology for determining the technological parameters for the use of hydraulic mining giants in the extraction of amber-bearing rocks, and to demonstrate the necessity of applying hydromechanical extraction… read more here.
Keywords: methodology; technological parameters; extraction; bearing rocks ... See more keywords
Optimization and Testing of the Technological Parameters for the Microwave Vacuum Drying of Mulberry Harvests
Sign Up to like & getrecommendations! Published in 2024 at "Applied Sciences"
DOI: 10.3390/app14104137
Abstract: This study focuses on mitigating the decrease in the quality of mulberry after harvest and increasing the value of mulberry products through microwave vacuum drying. The effects of mulberry moisture content on texture properties were… read more here.
Keywords: microwave vacuum; content; vacuum; technological parameters ... See more keywords
Optimisation of CO2 Laser Technological Parameters and Their Impact on the Surface Quality of Cut Wood
Sign Up to like & getrecommendations! Published in 2025 at "Forests"
DOI: 10.3390/f16050785
Abstract: This paper discusses cutting beech wood (Fagus sylvatica L.) using a CO2 laser and optimising its feed speed and laser power concerning the roughness of the cut surface and the kerf width. The roughness, defined… read more here.
Keywords: feed speed; kerf width; technological parameters; co2 laser ... See more keywords
Investigating Technological Parameters and TiN-Coated Electrodes for Enhanced Efficiency in Ti-6Al-4V Micro-EDM Machining
Sign Up to like & getrecommendations! Published in 2024 at "Metals"
DOI: 10.3390/met14020162
Abstract: Micro-electrical discharge machining (micro-EDM) stands out as a transformative methodology, offering substantial progress in both technical and economic efficiency through the integration of coated electrodes. This study meticulously analyzes various technological parameters in micro-EDM, focusing… read more here.
Keywords: methodology; micro edm; micro; technological parameters ... See more keywords
Optimizing Technological Parameters for Chromium Extraction from Chromite Ore Beneficiation Tailings
Sign Up to like & getrecommendations! Published in 2025 at "Minerals"
DOI: 10.3390/min15060555
Abstract: This study focuses on optimizing the alkali roasting conditions for chromite beneficiation tailings with the goal of enhancing chromium oxide (Cr2O3) extraction. Within the experimental framework, the variables included roasting temperature, the amount of added… read more here.
Keywords: chromite; beneficiation tailings; extraction; technological parameters ... See more keywords
Optimization of Technological Parameters of the Process of Forming Therapeutic Biopolymer Nanofilled Films
Sign Up to like & getrecommendations! Published in 2022 at "Nanomaterials"
DOI: 10.3390/nano12142413
Abstract: The prospects of using biopolymer nano-containing films for wound healing were substantiated. The main components of biopolymer composites are gelatin, polyvinyl alcohol, glycerin, lactic acid, distilled water, and zinc oxide (ZnO) nanoparticles (NPs). Biopolymer composites… read more here.
Keywords: nanofilled films; technological parameters; biopolymer nanofilled; therapeutic biopolymer ... See more keywords