Simultaneous Edge-on to Face-on Reorientation and 1D Alignment of Small π-Conjugated Molecules Using Room-Temperature Mechanical Rubbing
Sign Up to like & getrecommendations! Published in 2018 at "Advanced Functional Materials"
DOI: 10.1002/adfm.201707038
Abstract: In this study, room-temperature mechanical rubbing is used to control the 3D orientation of small π-conjugated molecular systems in solution-processed polycrystalline thin films without using any alignment substrate. High absorption dichroic ratio and significant anisotropy… read more here.
Keywords: mechanical rubbing; temperature mechanical; edge face; room temperature ... See more keywords
High-Temperature Mechanical Properties of Zn-Based High-Temperature Lead-Free Solders
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Electronic Materials"
DOI: 10.1007/s11664-018-6776-6
Abstract: The effect of a minor addition of Ti on the mechanical behavior of Zn-25Sn-xTi (x = 0 wt.%, 0.02 wt.% and 0.04 wt.%) solder alloy at high temperatures of 80°C, 100°C, and 120°C was investigated. The investigation revealed that Ti… read more here.
Keywords: properties based; solders high; temperature; high temperature ... See more keywords
A New Method of Creating High-Temperature Speckle Patterns and Its Application in the Determination of the High-Temperature Mechanical Properties of Metals
Sign Up to like & getrecommendations! Published in 2018 at "Experimental Techniques"
DOI: 10.1007/s40799-018-0256-z
Abstract: Speckle techniques, such as DIC (Digital Image Correlation) and DSP (Digital Speckle Photography), are frequently used to determine the high-temperature mechanical properties of materials. Speckle techniques require the creation of a random speckle pattern on… read more here.
Keywords: temperature; creating high; speckle; high temperature ... See more keywords
Preparation and in-situ high-temperature mechanical properties of Cf-SiCf reinforced geopolymer composites
Sign Up to like & getrecommendations! Published in 2017 at "Ceramics International"
DOI: 10.1016/j.ceramint.2016.09.192
Abstract: Abstract The hybrid Cf and SiCf reinforced geopolymer (Cf-SiCf/KGP) composites were successfully prepared by a simple method that mixing a kind of hybrid fiber preform pre-developed in geopolymer resin. The microstructure evolution and high temperature… read more here.
Keywords: temperature; reinforced geopolymer; high temperature; sicf reinforced ... See more keywords
Effect of food chemicals and temperature on mechanical reliability of bio-based glass fibers reinforced polyamide
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2018.08.078
Abstract: This paper presents an experimental study to assess the effects of food chemicals and temperature on the mechanical performance of glass fiber reinforced bio-based polyamide. The diffusion of food ... read more here.
Keywords: temperature mechanical; food; bio based; food chemicals ... See more keywords
Microstructure evolution and high-temperature mechanical properties of SiCf/SiC composites in liquid fluoride salt environment
Sign Up to like & getrecommendations! Published in 2017 at "Corrosion Science"
DOI: 10.1016/j.corsci.2017.05.016
Abstract: Abstract High temperature mechanical properties and microstructure evolution of chemical-vapor-infiltrated SiC fiber reinforced SiC ceramic matrix composites (SiC f /SiC) in 46.5LiF-11.5NaF-42.0KF (mol.%, FLiNaK) eutectic salt were investigated. The results indicate that the corrosion of… read more here.
Keywords: temperature; high temperature; corrosion; temperature mechanical ... See more keywords
Influence of heat treatment on the microstructure evolution and elevated temperature mechanical properties of Hastelloy-X processed by laser directed energy deposition
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2021.159207
Abstract: Abstract The microstructure and elevated temperature mechanical properties of Hastelloy-X (Hast-X) bulk structures built using Laser Directed Energy Deposition (LDED) based Additive Manufacturing is investigated in as-built (AB) and heat-treated (HT) conditions. Microscopic analysis show… read more here.
Keywords: temperature mechanical; elevated temperature; heat; mechanical properties ... See more keywords
Microstructure and elevated-temperature mechanical properties of dispersoid-strengthened Al-Mg-Si-Mn alloys produced by twin roll casting
Sign Up to like & getrecommendations! Published in 2021 at "Progress in Natural Science: Materials International"
DOI: 10.1016/j.pnsc.2021.08.004
Abstract: Abstract The microstructure and elevated-temperature mechanical properties of dispersoid-strengthened Al-Mg-Si-Mn alloys produced by twin roll casting (TRC) and conventional mold casting (MC) were studied. A specific heat treatment at 430 °C for 6 h was applied, followed… read more here.
Keywords: sample; trc sample; microstructure elevated; elevated temperature ... See more keywords
The effect of temperature on the mechanical characteristics of individual particles
Sign Up to like & getrecommendations! Published in 2018 at "Powder Technology"
DOI: 10.1016/j.powtec.2018.06.023
Abstract: Abstract The current work investigates the effect of temperature on the mechanical characteristics such as breakage force, breakage energy, yield force and effective modulus of elasticity of individual particles. This is important for modeling particle… read more here.
Keywords: temperature; effect temperature; individual particles; temperature mechanical ... See more keywords
Microstructure and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints
Sign Up to like & getrecommendations! Published in 2020 at "Transactions of Nonferrous Metals Society of China"
DOI: 10.1016/s1003-6326(19)65188-5
Abstract: Abstract The microstructure evolution and high-temperature mechanical properties of laser beam welded TC4/TA15 dissimilar titanium alloy joints under different welding parameters were studied. The results show that the weld fusion zone of TC4/TA15 dissimilar welded… read more here.
Keywords: tc4 ta15; ta15; high temperature; temperature mechanical ... See more keywords
Effect of Temperature on the Mechanical Properties of Hydrate-Bearing Sand under Different Confining Pressures
Sign Up to like & getrecommendations! Published in 2021 at "Energy & Fuels"
DOI: 10.1021/acs.energyfuels.1c00052
Abstract: Natural gas hydrate has always been the focus of scientists’ research as a kind of clean energy. There is a causal relationship between the thorough study of mechanical properties of hydrate-bearin... read more here.
Keywords: effect temperature; temperature mechanical; bearing sand; mechanical properties ... See more keywords