Role of sintering temperature on microstructure and nonlinear electrical properties of 0.1 mol.% Nb2O5 added ZnO–V2O5 varistor ceramics
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-00857-5
Abstract: The effect of sintering temperature on the microstructure, density and nonlinear electrical properties of 0.1 mol% Nb2O5 added ZnO–V2O5 varistor ceramics had been investigated. Density measurement, scanning electron microscopy (SEM), X-ray diffraction (XRD) pattern analysis characterized… read more here.
Keywords: properties mol; temperature microstructure; sintering temperature; nonlinear electrical ... See more keywords
Effect of Aging Temperature on the Microstructure, Local Mechanical Properties, and Wear Behavior of a UNS S32750 Super Duplex Stainless Steel
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05332-5
Abstract: In this paper, the effect of aging temperature on the microstructure, local mechanical properties and wear behavior of a UNS S32750 super duplex stainless steel is investigated. A massive preferential precipitation of σ phase and… read more here.
Keywords: local mechanical; temperature; aging temperature; temperature microstructure ... See more keywords
Effects of sintering temperature on microstructure and dielectric properties of Sr0.985Ce0.01TiO3 ceramics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.05.140
Abstract: Abstract The effects of sintering temperature on microstructure and dielectric properties of Ce doped SrTiO3 were investigated. The dielectric properties are strongly depend on sintering temperature, the sample sintered at 1520 °C exhibits a colossal permittivity… read more here.
Keywords: temperature; effects sintering; dielectric properties; sintering temperature ... See more keywords
Influence of warm-rolling and annealing temperature on the microstructure and mechanical properties of ductile non-equal molar Co40Cr25Fe10Ni25 high entropy alloys
Sign Up to like & getrecommendations! Published in 2018 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2018.06.032
Abstract: Abstract The influence of warm-rolling and annealing temperature on the microstructure and mechanical properties of ductile non-equal molar Co40Cr25Fe10Ni25 high entropy alloys (HEAs) were investigated. The results indicate partial recrystallization occurs after annealing at 600 °C,… read more here.
Keywords: microstructure; temperature microstructure; warm rolling; influence warm ... See more keywords
Effects of sintering temperature on microstructure, initial permeability and electric behaviour of Ni-Mn-Zn ferrites
Sign Up to like & getrecommendations! Published in 2022 at "Materials Chemistry and Physics"
DOI: 10.1016/j.matchemphys.2021.125250
Abstract: Abstract The effects of sintering temperature on microstructure, initial permeability, and electrical behaviour of Ni0.5-xMnxZn0.5Fe2O4 (0.0 read more here.
Keywords: initial permeability; effects sintering; microstructure initial; temperature microstructure ... See more keywords
Effects of annealing temperature on microstructure and mechanical properties of LZ91 alloy
Sign Up to like & getrecommendations! Published in 2020 at "Materials Science and Technology"
DOI: 10.1080/02670836.2020.1853361
Abstract: Effects of annealing temperature on the microstructure and mechanical properties of cold-rolled LZ91 alloy are investigated. The results indicate that LZ91 alloy is composed of α-Mg, β-Li, MgLiZn and MgLi2Zn phases. The recrystallization of the… read more here.
Keywords: effects annealing; temperature microstructure; lz91 alloy; mechanical properties ... See more keywords
Influence of the sintering temperature on the microstructure, mechanical properties and densification characteristics of (TiB + TiC)/TC4 composite
Sign Up to like & getrecommendations! Published in 2021 at "Materials Research Express"
DOI: 10.1088/2053-1591/ac40b7
Abstract: A hybrid of TiB whiskers and TiC particles reinforced TC4 matrix composites were in situ synthesized by spark plasma sintering (SPS) using a TC4-0.6wt.% B4C powder mixture at temperatures range from 550 °C to 1150… read more here.
Keywords: tib tic; sintering temperature; properties densification; temperature ... See more keywords
Effects of Coiling Temperature on Microstructure and Precipitation Behavior in Nb–Ti Microalloyed Steels
Sign Up to like & getrecommendations! Published in 2018 at "Isij International"
DOI: 10.2355/isijinternational.isijint-2017-614
Abstract: Traditional thermo-mechanical controlled processing (TMCP) and microalloying technology are two major methods for refining microstructure and improving the mechanical properties of HSLA steels.1) The microstructure and mechanical properties of thermo-mechanically processed hot rolled strip steels… read more here.
Keywords: temperature; coiling temperature; microstructure precipitation; temperature microstructure ... See more keywords
Effect of Intercritical Tempering Temperature on Microstructure Evolution and Mechanical Properties of High Strength and Toughness Medium Manganese Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15062162
Abstract: The effect of intercritical tempering temperature (TT) on the microstructure evolution and mechanical properties of 3.6Mn medium manganese steel, which contained martensite and austenite, was investigated by X-ray diffraction, electron backscattering diffraction and transmission electron… read more here.
Keywords: strength; effect intercritical; intercritical tempering; temperature microstructure ... See more keywords
Effect of Tempering Temperature on Microstructure and Sulfide Stress Cracking of 125 Ksi Grade Casing Steel
Sign Up to like & getrecommendations! Published in 2022 at "Materials"
DOI: 10.3390/ma15072589
Abstract: The influence of tempering temperature on the microstructure of 0.5Cr0.4W steels was investigated by scanning electron microscope, and the roles of grain boundary character, dislocation, and Taylor factor in sulfide stress cracking (SSC) resistance were… read more here.
Keywords: stress; steel; temperature microstructure; temperature ... See more keywords
Effect of Tempering Temperature on Microstructure and Mechanical Properties of 35CrMo Steel
Sign Up to like & getrecommendations! Published in 2023 at "Metals"
DOI: 10.3390/met13040771
Abstract: In this paper, the influence mechanism of tempering temperature on the microstructure and mechanical properties of 35CrMo steel used in the hammerhead of piston-type impact pile hammer is systematically analyzed. The microstructure was characterized by… read more here.
Keywords: microstructure; temperature microstructure; microstructure mechanical; mechanical properties ... See more keywords