Synthesis and tensile properties of biomass‐based cis‐1,4‐polybutadiene using erythritol‐derived 1,3‐butadiene as a monomer
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55401
Abstract: Transition metal–catalyzed polymerization of 1,3‐butadiene obtained from the erythritol, a kind of biomass product, was investigated to evaluate the effect of byproducts in the synthesis of 1,3‐butadiene from erythritol. Nuclear magnetic resonance spectroscopy and size… read more here.
Keywords: derived butadiene; erythritol derived; tensile; polybutadiene ... See more keywords
Fibrous‐biocomposites scaffold of natural rubber with bioactive glass–ceramic particles obtained by solution blowing spinning
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.56448
Abstract: Bioactive glass‐ceramics (BGs) are widely used in clinical applications due to their excellent biodynamic and biological properties, though their low mechanical strength limits their use in load‐bearing contexts. This study aimed to develop fibrous biocomposite… read more here.
Keywords: bios bl0; bioactive glass; tensile; natural rubber ... See more keywords
Effects of silk degumming process on physicochemical, tensile, and optical properties of regenerated silk fibroin
Sign Up to like & getrecommendations! Published in 2018 at "Macromolecular Materials and Engineering"
DOI: 10.1002/mame.201800408
Abstract: Sericin removal from silk (degumming) affects material characteristics of silk fibroin (SF). Sodium carbonate is most commonly used for degumming, but numerous alternative methods are available. Herein, a systematic comparison of degumming methods is provided.… read more here.
Keywords: sodium carbonate; silk fibroin; silk degumming; tensile ... See more keywords
Mechanochromic Polymer Film with High Sensitivity toward Tensile Strain by the Post-Curing Ring-Closure Induced Pre-Stretching.
Sign Up to like & getrecommendations! Published in 2024 at "Macromolecular rapid communications"
DOI: 10.1002/marc.202400145
Abstract: Mechanochromic materials has received broad research interests recently, owing to its ability to monitor the in-situ stress/strain in polymer materials in a straight forward way. However, one major setback that hinder the practical application of… read more here.
Keywords: tensile; polymer; strain; tensile strain ... See more keywords
Polymer-Grafted, Gold Nanoparticle-Based Nano-Capsules as Reversible Colorimetric Tensile Strain Sensors.
Sign Up to like & getrecommendations! Published in 2023 at "Small"
DOI: 10.1002/smll.202300361
Abstract: Colloidal colorimetric microsensors enable the in-situ detection of mechanical strains within materials. Enhancing the sensitivity of these sensors to small scale deformation while enabling reversibility of the sensing capability would expand their utility in applications… read more here.
Keywords: tensile; polymer grafted; gold nanoparticle; grafted gold ... See more keywords
Hybridization of polyhedral oligomeric silsesquioxane and boron nitride for epoxy composites with improved dielectric, thermal and tensile properties
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01375-0
Abstract: Low-dielectric polymer composites with high mechanical and thermal properties are very promising for microelectronic devices application. In this paper, chloride salt of octa (aminopropylsilsesquioxane) was prepared successfully and then was grafted onto silane modified boron… read more here.
Keywords: thermal tensile; boron nitride; dielectric thermal; tensile properties ... See more keywords
The Effect of Carboxyl Group Content on Water Uptake Capacity and Tensile Properties of Functionalized Soy Protein-Based Superabsorbent Plastics
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Polymers and the Environment"
DOI: 10.1007/s10924-018-1183-x
Abstract: This manuscript studies the relation between macroscopic properties of the soy protein isolate (SPI)-based superabsorbent polymers (SAP) (e.g., water uptake capacity and tensile properties) and the extent of chemical modification conducted on the protein. The… read more here.
Keywords: capacity; water; soy protein; based superabsorbent ... See more keywords
The Effect of Ca Content on the Microstructure, Hardness and Tensile Properties of AZ81 Mg Cast Alloy
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2671-1
Abstract: The effects of various Ca contents (0.1-4 wt.%) on the microstructure and tensile properties of AZ81 magnesium alloy were investigated with the contribution of an analytical method. Ca addition (up to 1.0 wt.%) refined the… read more here.
Keywords: alloy; addition; properties az81; tensile properties ... See more keywords
Tensile Properties and Fracture Characteristics of Nanostructured Copper and Cu-SiC Nanocomposite Produced by Mechanical Milling and Spark Plasma Sintering Process
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3267-0
Abstract: The presence of large grains within nanometric and ultrafine grain matrix is an effective method in order to enhance strength while keeping the high ductility of metals. For this purpose, in this research, spark plasma… read more here.
Keywords: sic nanocomposite; plasma sintering; spark plasma; tensile properties ... See more keywords
Enhanced Hot Tensile Ductility of Mg-3Al-1Zn Alloy Thin-Walled Tubes Processed Via a Combined Severe Plastic Deformation
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-018-3350-6
Abstract: In the current study, combined parallel tubular channel angular pressing (PTCAP) and tube backward extrusion (TBE), as a recently developed severe plastic deformation (SPD) method, were applied at 300 °C on a commercial Mg-3Al-1Zn alloy tubes… read more here.
Keywords: 3al 1zn; severe plastic; hot tensile; tensile ... See more keywords
Tensile Properties of Built and Rebuilt/Repaired Specimens of 316L Stainless Steel Using Directed Energy Deposition
Sign Up to like & getrecommendations! Published in 2020 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-020-05087-z
Abstract: One of the most exciting possibilities brought forward by some additive manufacturing (AM) processes is their ability to deposit materials on existing parts. Mainly achievable with directed energy deposition systems, it is thus possible to… read more here.
Keywords: directed energy; energy deposition; stainless steel; tensile ... See more keywords