Acoustic emission monitoring of the tensile behavior of a HVOF-sprayed NiCoCrAlYCe coating
Sign Up to like & getrecommendations! Published in 2020 at "Applied Surface Science"
DOI: 10.1016/j.apsusc.2019.144400
Abstract: Abstract In this paper, the tensile behavior of a high velocity oxygen fuel (HVOF) sprayed NiCoCrAlYCe coating coupled with acoustic emission (AE) has been investigated. The results indicate that the NiCoCrAlYCe coating is composed of… read more here.
Keywords: hvof sprayed; acoustic emission; tensile behavior; nicocralyce coating ... See more keywords
Tensile behavior of γ/α2 interface system in lamellar TiAl alloy via molecular dynamics
Sign Up to like & getrecommendations! Published in 2019 at "Computational Materials Science"
DOI: 10.1016/j.commatsci.2018.12.043
Abstract: Abstract The deformability and strength of lamellar two-phase (γ and α2) TiAl intermetallic based alloy strongly depends on the lamellar interfaces in such microstructure. Molecular dynamics simulations are conducted to investigate the mechanical response and… read more here.
Keywords: molecular dynamics; interface; tensile behavior; interface system ... See more keywords
On the modeling of tensile behavior of ultra-high performance fiber-reinforced concrete with freezing-thawing actions
Sign Up to like & getrecommendations! Published in 2019 at "Composites Part B: Engineering"
DOI: 10.1016/j.compositesb.2019.106983
Abstract: Abstract An analytical model is proposed to predict the tensile behavior of Ultra-High Performance fiber-reinforced Concrete (UHPC) with extended cyclic freezing-thawing (F-T) actions. Based on the work mechanisms of stress transfer at the matrix-fiber interface,… read more here.
Keywords: behavior ultra; ultra high; tensile behavior; behavior ... See more keywords
Splitting tensile behavior of autoclaved aerated concrete: Comparison of different specimens’ results
Sign Up to like & getrecommendations! Published in 2017 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2017.09.167
Abstract: Abstract This research presents results of the experimental and numerical study of Brazilian tests on cylindrical and cubic specimens made of autoclaved aerated concrete. Failure mechanisms are discussed based on spatial finite element simulations and… read more here.
Keywords: concrete comparison; behavior autoclaved; splitting tensile; autoclaved aerated ... See more keywords
Tensile behavior and microstructure of hybrid fiber ambient cured one-part engineered geopolymer composites
Sign Up to like & getrecommendations! Published in 2018 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2018.07.012
Abstract: Abstract This paper investigates the tensile behavior of the recently developed ambient-cured one-part engineered geopolymer composites (EGC) incorporating different hybrid combinations of steel (ST) and polyethylene (PE) fibers while maintaining the total fiber volume at… read more here.
Keywords: cured one; matrix; tensile behavior; ambient cured ... See more keywords
Tensile behavior of a novel high-strength and high-toughness steel at strain rates from 0.1 s−1 to 1000 s−1
Sign Up to like & getrecommendations! Published in 2021 at "Construction and Building Materials"
DOI: 10.1016/j.conbuildmat.2021.124606
Abstract: Abstract This paper aims to investigate the tensile behavior of a novel high-strength and high-toughness steel at different strain rates ranging from 0.1 s−1 to 1000 s−1. Uniaxial tensile tests with seven different strain rates were conducted… read more here.
Keywords: steel; strength; tensile behavior; strain ... See more keywords
Tensile behavior of polymer nanocomposite reinforced with graphene containing defects
Sign Up to like & getrecommendations! Published in 2018 at "European Polymer Journal"
DOI: 10.1016/j.eurpolymj.2017.11.050
Abstract: This paper investigates the tensile behavior in both armchair and zigzag directions of polymer nanocomposites reinforced with defective single layer graphene containing single or double vacancies by using molecular dynamics simulations. The results show that… read more here.
Keywords: polymer nanocomposite; graphene containing; nanocomposite reinforced; behavior polymer ... See more keywords
Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates
Sign Up to like & getrecommendations! Published in 2019 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2019.102426
Abstract: Abstract In composite structures, the strength of a standard single-lap joint with multiple bolts at best matches the strength predicted by the standard open-hole tension (OHT) test, which is about 50% of the tensile strength… read more here.
Keywords: bonded joints; multi bolted; strength; behavior hybrid ... See more keywords
Tensile behavior of 2D-C/SiC composites at elevated temperatures: Experiment and modeling
Sign Up to like & getrecommendations! Published in 2017 at "Journal of The European Ceramic Society"
DOI: 10.1016/j.jeurceramsoc.2016.11.011
Abstract: Abstract In this paper, on-axis tensile behavior of a coated 2D-C/SiC composite at elevated temperatures was studied experimentally and theoretically. The measured data reveals that the tensile modulus and strength increase continuously with increasing temperature… read more here.
Keywords: tensile behavior; behavior sic; composites elevated; sic composites ... See more keywords
The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA)
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Manufacturing Processes"
DOI: 10.1016/j.jmapro.2018.08.013
Abstract: Abstract Fused deposition modeling (FDM) is widely accepted AM process due to its capability of fabricating intricate geometries using filament of thermoplastic materials such as ABS, PLA, etc. Due to the limitations of the filament… read more here.
Keywords: process; effect process; process parameters; tensile behavior ... See more keywords
Utilization of Random Vector Functional Link integrated with Marine Predators Algorithm for tensile behavior prediction of dissimilar friction stir welded aluminum alloy joints
Sign Up to like & getrecommendations! Published in 2020 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2020.08.022
Abstract: Abstract Friction stir welding (FSW) method becomes an effective technique for welding dissimilar alloys such as AA2024 and AA5083 as the conventional fusion welding methods are not very suitable for welding the dissimilar alloysand cause… read more here.
Keywords: tensile behavior; aluminum alloy; stir welded; friction stir ... See more keywords