Tailored Printing Parameters for Optimized Tensile Performance of PETG‐CF Lightweight Structures in Industrial Use
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.70183
Abstract: This study focuses on optimizing the printing parameters of carbon fiber‐reinforced polyethylene terephthalate glycol (PETG‐CF) structures to improve their mechanical behavior under tensile loading. Three critical design parameters were strategically selected: infill pattern structure (gyroid,… read more here.
Keywords: tensile performance; printing parameters; petg; parameters optimized ... See more keywords
Enhanced tensile ductility and sustainability of high-strength strain-hardening cementitious composites using waste cement kiln dust and oxidized polyethylene fibers
Sign Up to like & getrecommendations! Published in 2021 at "Cement and Concrete Composites"
DOI: 10.1016/j.cemconcomp.2021.104030
Abstract: Abstract To improve the tensile performance and sustainability of high-strength strain-hardening cementitious composites (SHCC), waste cement kiln dust (CKD) was used, replacing 30% of ordinary Portland cement (PC), and polyethylene (PE) fibers were modified through… read more here.
Keywords: tensile performance; strength; cement; sustainability high ... See more keywords
Tensile performance of silica-based electrospun fibrous mats
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Non-crystalline Solids"
DOI: 10.1016/j.jnoncrysol.2017.05.016
Abstract: Abstract To understand the relationship between mechanical behavior and fiber assembly in electrospun ceramic-based fibrous mats, the tensile performance of silica, silica/polydimethylsiloxane and silica/polymethyl methacrylate hybrid fibrous mats was investigated. Elastic-plastic behavior as a whole… read more here.
Keywords: tensile performance; silica; silica based; performance silica ... See more keywords
Influence of stitching parameters on the tensile performance and failure mechanisms of CFRP T-joints
Sign Up to like & getrecommendations! Published in 2025 at "e-Polymers"
DOI: 10.1515/epoly-2025-0061
Abstract: Abstract T-joints made from carbon fiber reinforced polymer (CFRP) composites are widely used in aircraft fuselages. However, CFRP structures are prone to interlaminar delamination, for which stitching reinforcement presents a promising solution. Therefore, this work… read more here.
Keywords: stitching parameters; tensile performance; performance; influence stitching ... See more keywords
Predicting the Tensile Performance of 3D-Printed PE Fibre-Reinforced ECC Based on Micromechanics Model
Sign Up to like & getrecommendations! Published in 2025 at "Buildings"
DOI: 10.3390/buildings15224058
Abstract: To elucidate the influence of the extrusion-based 3D printing of concrete on the tensile performance of polyethylene fibre-based engineered cementitious composites (PE-ECC), quantitative analyses of reinforcing filament alignment and pore morphology were carried out using… read more here.
Keywords: tensile performance; fibre reinforced; performance printed; performance ... See more keywords
Corrosion Characteristics and Tensile Performance of Bolted Spherical Joints in Aggressive Environments
Sign Up to like & getrecommendations! Published in 2025 at "Materials"
DOI: 10.3390/ma18102185
Abstract: Bolted spherical joints (BSJs) are widely used in spatial grid structures owing to their clear force transmission paths and ease of on-site assembly. This study investigates the corrosion behavior and tensile performance of BSJs fabricated… read more here.
Keywords: tensile performance; spherical joints; bolted spherical; corrosion characteristics ... See more keywords
Tensile Performance Sensitivity to Variations of Standard 17-4 PH Heat Treatments on LPBF-Produced Material
Sign Up to like & getrecommendations! Published in 2025 at "Metals"
DOI: 10.3390/met15101141
Abstract: Standard heat treatments for metals of a particular composition are typically designed with the assumption of a conventional starting microstructure, such as that produced by casting or wrought processing. When applied to metals fabricated by… read more here.
Keywords: tensile performance; standard heat; heat; heat treatments ... See more keywords