Microstructures and Tensile Properties of AZ91 Magnesium Alloys with Ca, Sm, and La Elements Additions
Sign Up to like & getrecommendations! Published in 2017 at "Advanced Engineering Materials"
DOI: 10.1002/adem.201700230
Abstract: Microstructures and tensile properties of as-cast and as-extruded AZ91 magnesium alloys with individual and combined additions of Ca, Sm, and La elements are investigated. The results show that Al2Ca, Al2Sm, and Al11La3 new phases form… read more here.
Keywords: microstructures tensile; az91 magnesium; magnesium alloys; tensile properties ... See more keywords
Morphology of Intermetallics Tailoring Tensile Properties and Quality Index of a Eutectic Al–Si–Ni Alloy
Sign Up to like & getrecommendations! Published in 2020 at "Advanced Engineering Materials"
DOI: 10.1002/adem.202000503
Abstract: Herein, the eutectic Al–11 wt% Si–5 wt% Ni alloy, directionally solidified under transient heat‐flow conditions, is comparatively evaluated in relation to the binary Al–11 wt% Si and Al–5 wt% Ni alloys. Correlations are developed relating the solidification cooling rate,… read more here.
Keywords: quality index; eutectic alloy; tensile properties;
Effect of coagulation conditions on solvent diffusions and the structures and tensile properties of solution spun polyacrylonitrile fibers
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.44390
Abstract: Polyacrylonitrile (PAN) fibers were spun by solution spinning. In this work, two coagulation compositions, dimethyl sulfoxide (DMSO)/water and methanol, were used, and coagulation temperatures were varied from −20 to 0 to 20°C. The coagulation compositions… read more here.
Keywords: coagulation; used coagulation; pan fibers; coagulation conditions ... See more keywords
Effect of the Deformation Amount on the Microstructure and Tensile Properties of 304 Stainless Steel with 2 wt% Al Content by Cold Rolling
Sign Up to like & getrecommendations! Published in 2020 at "steel research international"
DOI: 10.1002/srin.201900585
Abstract: The microstructure evolution during cold rolling and mechanical properties after solution treatment of 304 stainless steel with 2 wt% Al are investigated and the tensile properties of the steels are also tested. The results show that… read more here.
Keywords: tensile properties; steel; cold rolling; 304 stainless ... See more keywords
Tensile properties and wear resistance of epoxy nanocomposites reinforced with cellulose nanofibers
Sign Up to like & getrecommendations! Published in 2017 at "Polymer Bulletin"
DOI: 10.1007/s00289-017-2142-8
Abstract: Cellulose nanofibers (CNFs) were prepared from sugarcane bagasse and used as reinforcement in epoxy nanocomposites. To obtain CNFs, the cellulose was bleached with sodium chlorite, hydrothermally hydrolyzed with 5% w/v oxalic acid under pressure of 800… read more here.
Keywords: wear resistance; cellulose nanofibers; tensile properties; properties wear ... See more keywords
Thermal resistance and tensile properties studies on PVC-C/EVA submitted to 60Co γ-ray up to 50 KGy and thermal aging at 80 °C
Sign Up to like & getrecommendations! Published in 2018 at "Polymer Bulletin"
DOI: 10.1007/s00289-018-2389-8
Abstract: The interest of mixing PVC-C and EVA with different concentrations (5–10–15–20%) is to combine the useful properties to develop a product resistant to thermal aging and gamma rays up to 50 KGy. In this study, the… read more here.
Keywords: pvc eva; resistance tensile; tensile properties; thermal resistance ... See more keywords
Effect of annealing on microstructure and tensile properties of polypropylene cast film
Sign Up to like & getrecommendations! Published in 2017 at "Colloid and Polymer Science"
DOI: 10.1007/s00396-017-4220-8
Abstract: In this work, the effect of annealing on microstructure and tensile properties of polypropylene (PP) cast film was investigated by differential scanning calorimetry (DSC), wide-angle X-ray diffraction (XRD), small-angle X-ray scattering (SAXS), SEM, etc. The… read more here.
Keywords: annealing microstructure; effect annealing; tensile properties; microstructure tensile ... See more keywords
Effect of Scanning Speed with UV Laser Cleaning on Adhesive Bonding Tensile Properties of CFRP
Sign Up to like & getrecommendations! Published in 2019 at "Applied Composite Materials"
DOI: 10.1007/s10443-019-09768-4
Abstract: The surfaces of the carbon fiber resin matrix reinforced polymer (CFRP) are completely cleaned and partially cleaned by controlling the ultraviolet laser (UV) scanning speed. Residual resin and surface energy of laser cleaning samples are… read more here.
Keywords: laser; surface; cleaning; tensile properties ... See more keywords
Interface homogenization and its relationship with tensile properties of laser-arc hybrid welded Al/steel butt-joint via beam oscillation
Sign Up to like & getrecommendations! Published in 2021 at "Journal of Materials Science"
DOI: 10.1007/s10853-021-06234-0
Abstract: Homogenized intermetallic compound (IMC) layer at interface was achieved in laser-arc hybrid butt welded Al/steel dissimilar metals through beam oscillation. The beam oscillation reduced the macrosegregation of Fe element in the weld, which increased the… read more here.
Keywords: tensile properties; beam oscillation; interface; interface homogenization ... See more keywords
Hybridization of polyhedral oligomeric silsesquioxane and boron nitride for epoxy composites with improved dielectric, thermal and tensile properties
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-019-01375-0
Abstract: Low-dielectric polymer composites with high mechanical and thermal properties are very promising for microelectronic devices application. In this paper, chloride salt of octa (aminopropylsilsesquioxane) was prepared successfully and then was grafted onto silane modified boron… read more here.
Keywords: thermal tensile; boron nitride; dielectric thermal; tensile properties ... See more keywords
Influence of Selected Treatment on Tensile Properties of Short Pineapple Leaf Fiber Reinforced Tapioca Resin Biopolymer Composites
Sign Up to like & getrecommendations! Published in 2018 at "Journal of Polymers and the Environment"
DOI: 10.1007/s10924-018-1296-2
Abstract: This work reports the influence of various treatments of pineapple leaf fibers (PALF) reinforced tapioca biopolymer (TBP) on the tensile properties. Three different treatments were selected, such as maleic anhydride polypropylene (MAPP) compatibility, maleic anhydride… read more here.
Keywords: pineapple leaf; treatment; biopolymer; reinforced tapioca ... See more keywords