Adhesive properties of laminated veneer lumber poles for use in temporary soil nailing: development and evaluation of a test method for curved structures in a high-alkaline environment
Sign Up to like & getrecommendations! Published in 2018 at "Wood Science and Technology"
DOI: 10.1007/s00226-018-0997-y
Abstract: AbstractInnovative circular, hollow, laminated veneer lumber (LVL) beech sections for use as temporary geotechnical soil reinforcement members are currently being developed. Appropriate surface gluing quality between the veneers is fundamental to this subsoil application of… read more here.
Keywords: tensile shear; veneer lumber; geometry; laminated veneer ... See more keywords
Cantilever testing of sintered-silver interconnects
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Materials Science: Materials in Electronics"
DOI: 10.1007/s10854-017-8063-3
Abstract: Cantilever testing is an underutilized test method from which results and interpretations promote greater understanding of the tensile and shear failure responses of interconnects, metallizations, or bonded joints. The use and analysis of this method… read more here.
Keywords: cantilever testing; testing sintered; tensile shear; silver interconnects ... See more keywords
Investigation of important influencing factors on the tensile shear strength of two component polyurethane with distinct foaming behaviour
Sign Up to like & getrecommendations! Published in 2018 at "International Journal of Adhesion and Adhesives"
DOI: 10.1016/j.ijadhadh.2018.04.013
Abstract: Abstract In this experimental research study, the tensile shear strengths of gap-filling two-component polyurethane (PUR) bonded lap joint specimens made out of spruce wood were investigated more closely. Based on a general full factorial design,… read more here.
Keywords: strength; wood; component polyurethane; influencing factors ... See more keywords
Microstructure evolution and mechanical behaviour of severely deformed pure titanium through multi directional forging
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.10.196
Abstract: Abstract Multi directional forging (MDF) is one of the severe plastic deformation methods utilized for production of ultrafine grained materials with improved mechanical properties. The main goal of the current study is to enhance mechanical… read more here.
Keywords: directional forging; tensile shear; pure titanium; titanium ... See more keywords
Crack front waves: A 3D dynamic response to a local perturbation of tensile and shear cracks
Sign Up to like & getrecommendations! Published in 2020 at "Journal of The Mechanics and Physics of Solids"
DOI: 10.1016/j.jmps.2019.103806
Abstract: Abstract Crack front waves are long-lived perturbations propagating along the crack front. They are triggered by heterogeneities on the crack plane, as for instance tough asperities, which disturb the crack front shape. Crack front waves… read more here.
Keywords: shear cracks; tensile shear; front waves; crack front ... See more keywords
Optimization of the tensile-shear strength of laser-welded lap joints of ultra-high strength abrasion resistance steel
Sign Up to like & getrecommendations! Published in 2021 at "Journal of materials research and technology"
DOI: 10.1016/j.jmrt.2021.01.121
Abstract: Abstract The tensile-shear strength of laser-welded lap joints developed in abrasion resistance ultra-high strength ARS-600 steel was optimized by evaluating the joints achieved with different welding parameters and various configurations of weld patterns, including multiple… read more here.
Keywords: tensile shear; strength laser; laser welded; strength ... See more keywords
Probability Distribution of Joint Point Loadings in Car Body Structures under Global Bending and Torsion
Sign Up to like & getrecommendations! Published in 2020 at "Procedia Manufacturing"
DOI: 10.1016/j.promfg.2020.04.324
Abstract: Abstract More than 6000 cylindrical joining points connect the individual sheet metal components of a current car body. Due to multi-material design, a large number of these points are currently realized by bulk-sheet metal-forming processes,… read more here.
Keywords: tensile shear; joining points; joint point; probability distribution ... See more keywords
Straintronics in graphene: Extra large electronic band gap induced by tensile and shear strains
Sign Up to like & getrecommendations! Published in 2019 at "Journal of Applied Physics"
DOI: 10.1063/1.5095600
Abstract: The possibility of inducing a sizeable energy gap in the electronic structure of a graphene layer is still one of the biggest and most debated challenges in graphene electronics. Despite promising theoretical results, some experimental… read more here.
Keywords: gap; bandgap; graphene extra; straintronics graphene ... See more keywords
Effect of short-range order on the mechanical behaviors of tensile and shear for NiCoFeCr
Sign Up to like & getrecommendations! Published in 2021 at "Applied Physics Letters"
DOI: 10.1063/5.0064420
Abstract: We adopt the modified embedded atom potentials based classical molecular dynamics in combination with the similar atomic environment method to investigate the effects of different short-range orders on the mechanical behaviors of NiCoFeCr under the… read more here.
Keywords: range order; short range; deformation; tensile shear ... See more keywords
Tensile and shear failure behaviour of compacted clay – hybrid failure mode
Sign Up to like & getrecommendations! Published in 2020 at "International Journal of Geotechnical Engineering"
DOI: 10.1080/19386362.2017.1408242
Abstract: Abstract Tensile and shear behaviour of unsaturated soil have been investigated separately in the past. However, there is no comprehensive study on the transition from tensile to shear failure in compacted clayey soils. A series… read more here.
Keywords: tensile shear; shear failure; behaviour; clay ... See more keywords
Effect of denture cleansing agents on tensile and shear bond strengths of soft liners to acrylic denture base
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Dental Research, Dental Clinics, Dental Prospects"
DOI: 10.15171/joddd.2017.033
Abstract: Background. The aim of the present study was to evaluate the effect of Corega and 2.5% sodium hypochlorite cleansing agents on the shear and tensile bond strengths of GC soft liner to denture base. Methods.… read more here.
Keywords: bond; bond strengths; tensile shear; shear bond ... See more keywords