Investigation into the Influence of Alkyl Thioureas with Varying Steric Hindrance on the Tensile Strength of Electrolytic Copper Foil
Sign Up to like & getrecommendations! Published in 2025 at "Advanced Materials Interfaces"
DOI: 10.1002/admi.202500164
Abstract: Thiourea derivatives are typical additives that exert different steric hindrance effects on the tensile strength of electrolytic copper foil (ECF). However, the underlying mechanisms remain unclear. Herein, thioureas with methyl, isopropyl, tertbutyl substituents, and unsubstituted… read more here.
Keywords: tensile strength; strength electrolytic; copper; steric hindrance ... See more keywords
Characterization of the Polycaprolactam‐ or Polycaprolactone‐Grafted Polyurethane and the Grafting Effect on Water Vapor Permeation and Tensile Strength
Sign Up to like & getrecommendations! Published in 2018 at "Advances in Polymer Technology"
DOI: 10.1002/adv.21771
Abstract: Polycaprolactam or polycaprolactone was graft-polymerized onto polyurethane (PU) to control the water vapor permeation and improve the tensile strength of PU. The tensile strength of the PU sharply increased with the grafting of polycaprolactam or… read more here.
Keywords: water vapor; polycaprolactam polycaprolactone; tensile strength; polycaprolactone ... See more keywords
Preparation and characterization of graphene‐agar and graphene oxide‐agar composites
Sign Up to like & getrecommendations! Published in 2017 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.45085
Abstract: Biodegradable counterparts of petro plastics for packaging applications are highly desired due to environmental considerations. Agar can be a potential material due to its availability and biodegradability. However, moderate mechanical strength and thermal stability, in… read more here.
Keywords: tensile strength; graphene oxide; rgo; agar ... See more keywords
Modeling of the temperature‐dependent tensile strength of polymer considering the effect of the two‐phase transition of glass and rubber phases
Sign Up to like & getrecommendations! Published in 2024 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.55826
Abstract: This study explores the contribution of glass phase and rubber phase to polymer failure, and establishes a theoretical model of temperature‐dependent tensile strength (TDTS) considering the effect of two‐phase transition based on the Force‐heat Equivalence… read more here.
Keywords: phase transition; tensile strength; two phase; polymer ... See more keywords
Porous Ultra‐High Molecular Weight Polyethylene Membrane Prepared by One‐ and Two‐Step Biaxially Stretching Method
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57271
Abstract: Volatile decalin as a solvent to prepare porous UHMWPE membrane is explored in this paper. Capillary force will lead to pore collapse, so decalin cannot be volatiled in the drawing process, and it must be… read more here.
Keywords: high molecular; step; tensile strength; biaxially stretching ... See more keywords
Enhancing Polycarbonate With Phosphoramide and PTFE: Achieving High Flame Retardancy, Transparency, and Tensile Strength
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57368
Abstract: A novel phosphoramide compound, DCPCD, was synthesized in this study, and then it was introduced into polycarbonate (PC) together with polytetrafluoroethylene (PTFE) through melt blending. The effects of DCPCD and PTFE on PC's thermal stability,… read more here.
Keywords: flame; transparency; flame retardancy; phosphoramide ... See more keywords
Copula‐Based Data Augmentation and Machine Learning for Predicting Tensile Strength of 3D‐Printed PLA Under Anisotropic Conditions
Sign Up to like & getrecommendations! Published in 2025 at "Journal of Applied Polymer Science"
DOI: 10.1002/app.57533
Abstract: In this study, 48 polylactic acid (PLA) samples were produced via 3D printing, incorporating four infill geometries (gyroid, lattice, honeycomb, and linear), four infill rates (15%–60%), and three printing directions (x, y, z). Tensile testing… read more here.
Keywords: tensile strength; data augmentation; infill; machine learning ... See more keywords
Elongational flow‐induced microstructure evolutions in polypropylene/layered double hydroxides nanocomposites
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28221
Abstract: In this work, the effect of the non‐isothermal elongational flow on the morphology and mechanical properties of polypropylene (PP)‐based nanocomposites containing Mg‐Al layered double hydroxides (LDHs) modified with stearate or oleate functional groups has been… read more here.
Keywords: flow induced; elongational flow; tensile strength; layered double ... See more keywords
Simulation of tensile strength for polymer hydroxyapatite nanocomposites by interphase and nanofiller dimensions
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.28469
Abstract: Several models have been used in literature studies to describe the mechanical behavior of hydroxyapatite (HA) polymer nanocomposites. However, previous models have often overlooked the size of HA and the properties of the interphase. In… read more here.
Keywords: interphase; strength polymer; nanocomposite strength; tensile strength ... See more keywords
Evaluation and enhancement of radial tensile strength of composite rotors for energy storage
Sign Up to like & getrecommendations! Published in 2024 at "Polymer Composites"
DOI: 10.1002/pc.29294
Abstract: This study focused on the measurement and improvement of the radial tensile strength of composite rotors for flywheel energy storage. Filament wound carbon/epoxy composite rotors were fabricated and the radial tensile strength was measured using… read more here.
Keywords: radial tensile; composite rotors; tensile strength; strength composite ... See more keywords
Durability of Basalt and Glass Fiber Composites Under Extreme Environments
Sign Up to like & getrecommendations! Published in 2025 at "Polymer Composites"
DOI: 10.1002/pc.30153
Abstract: This study evaluates the durability and mechanical performance of epoxy‐based glass fiber reinforced polymers (GFRP) and basalt fiber reinforced polymers (BFRP) under varying environmental conditions, including rainwater, distilled water, seawater, and acidic water, at temperatures… read more here.
Keywords: glass fiber; tensile strength; basalt glass; fiber ... See more keywords