Sign Up to like & get
recommendations!
1
Published in 2017 at "Journal of Materials Engineering and Performance"
DOI: 10.1007/s11665-017-2514-0
Abstract: Microsample tensile testing was conducted to evaluate the quality of impact welds created by vaporizing foil actuator welding. Tensile test samples with a gauge length of 0.6 mm were electro-discharge machined out of welds created between…
read more here.
Keywords:
impact;
temper flyers;
microsample tensile;
tensile test ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Journal of Alloys and Compounds"
DOI: 10.1016/j.jallcom.2018.03.144
Abstract: Abstract This paper provides several simple but significant formulas that shed light on the connection between the derived transverse stress and some special phenomena, including the premature fracture and largely slant fracture line, occurring during…
read more here.
Keywords:
transverse stress;
uniaxial tensile;
stress;
derived transverse ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2021 at "Materials Characterization"
DOI: 10.1016/j.matchar.2021.111180
Abstract: Abstract High-resolution X-ray computed tomography was used to perform in-situ observation of the microporosity evolution during a tensile test of a DD5 nickel-based single crystal superalloy. Every pore with the equivalent diameter over 7.53 μm has…
read more here.
Keywords:
single crystal;
tomography;
crystal superalloy;
ray ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2020 at "Materials today communications"
DOI: 10.1016/j.mtcomm.2019.100872
Abstract: Abstract Modelling the effect of fibre orientation in carbon fibre reinforced plastic (CFRP) on mechanical behaviour is critical for component design and manufacturing process optimization. The objectives of this paper are to simulate the mechanical…
read more here.
Keywords:
failure models;
fibre orientation;
failure;
test ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2019 at "Journal of Testing and Evaluation"
DOI: 10.1520/jte20180667
Abstract: The discrete element method (DEM) has recently been widely used to analyze the micromechanics behavior of asphalt mixtures. The objective of this study is to present a more accurate image-processing technique to perform an indirect…
read more here.
Keywords:
indirect tensile;
test;
discrete element;
tensile test ... See more keywords
Sign Up to like & get
recommendations!
1
Published in 2018 at "Metals"
DOI: 10.3390/met8090683
Abstract: The structural integrity of steel bolted joints may be compromised due to excessive loading. Therefore, condition assessment and the detection of potential defects before they cause a failure have become a major issue. The paper…
read more here.
Keywords:
tensile test;
bolted joints;
linear nonlinear;
steel bolted ... See more keywords
Sign Up to like & get
recommendations!
0
Published in 2021 at "Journal of Animal Science"
DOI: 10.47891/sabujas.v0i0.50-60
Abstract: In this research, samples of locally manufactured and imported reinforcing steel with different diameters 14 and 16 mm were studied by conducting tensile test, which is an important mechanical test to know the properties of…
read more here.
Keywords:
steel;
reinforcing steel;
yield;
test ... See more keywords