Articles with "term aging" as a keyword



Photo from wikipedia

The effect of microstructure evolution on the mechanical properties of martensite ferritic steel during long-term aging

Sign Up to like & get
recommendations!
Published in 2017 at "Acta Materialia"

DOI: 10.1016/j.actamat.2017.03.045

Abstract: Abstract The evolution of the microstructure and its effect on mechanical properties of a 10% Cr steel under long-term aging at 650 °C have been investigated. During short-term aging ( n m / h 1 /… read more here.

Keywords: steel long; term; evolution; long term ... See more keywords
Photo from wikipedia

Short-term aging resistance investigations of polymers and polyphosphoric acid modified asphalt binders under RTFOT aging process

Sign Up to like & get
recommendations!
Published in 2018 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2018.10.060

Abstract: Abstract High viscosity is an important feature of SBS modified asphalt, but it is not always favorable because it need more energy to achieve the same viscosity for mixing and construction. Therefore, there are many… read more here.

Keywords: modified asphalt; aging resistance; short term; term aging ... See more keywords
Photo from wikipedia

Comparative investigation on three laboratory testing methods for short-term aging of asphalt binder

Sign Up to like & get
recommendations!
Published in 2021 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2020.121204

Abstract: Abstract As one type of organic binder, asphalt is prone to aging under climatic conditions such as temperature, oxygen, water, sunlight, etc., which is one of the principal factors causing the performance degradation (raveling, potholes,… read more here.

Keywords: term; aging asphalt; term aging; binder ... See more keywords
Photo from wikipedia

Validation of a model to predict the effect of short-term aging on the rheological properties of asphalt binders

Sign Up to like & get
recommendations!
Published in 2021 at "Construction and Building Materials"

DOI: 10.1016/j.conbuildmat.2021.122381

Abstract: Abstract The impact of aging on asphalt binder depends on multiple factors including binder type and environmental conditions. In a previous study, Shalaby proposed two empirical equations to investigate the effects of extended short-term aging… read more here.

Keywords: predict effect; binder; short term; term aging ... See more keywords
Photo by riccardo__oliva from unsplash

Short-Term Aging of High-Content SBSMA

Sign Up to like & get
recommendations!
Published in 2018 at "Journal of Materials in Civil Engineering"

DOI: 10.1061/(asce)mt.1943-5533.0002382

Abstract: AbstractHighly modified styrene-butadiene-styrene–modified asphalt (SBSMA) with an SBS content of 6–9% is gaining popularity in China as an efficient binder for open graded friction course pavement... read more here.

Keywords: high content; aging high; term aging; content ... See more keywords
Photo by thisisengineering from unsplash

The effect of long-term aging on fatigue cracking resistance of asphalt mixtures

Sign Up to like & get
recommendations!
Published in 2020 at "International Journal of Pavement Engineering"

DOI: 10.1080/10298436.2020.1745206

Abstract: Asphalt aging is recognised as one of the important factors causing cracking related failures in asphalt pavements. Asphalt aging occurs during production, construction, and service life of the asp... read more here.

Keywords: long term; term aging; asphalt; aging fatigue ... See more keywords
Photo by bimoluki02 from unsplash

Long-Term Aging of Al2O3 Passivated and Unpassivated Flexible a-IGZO TFTs

Sign Up to like & get
recommendations!
Published in 2020 at "IEEE Transactions on Electron Devices"

DOI: 10.1109/ted.2020.3026613

Abstract: Amongst the new materials studied for the fabrication of high-performance flexible thin-film transistors (TFTs), amorphous indium-gallium-zinc-oxide (a-IGZO) exhibits a combination of advantages that enables its application in commercial electronics. Hence, it is crucial to understand… read more here.

Keywords: sub sub; sub; passivated unpassivated; igzo tfts ... See more keywords
Photo by philinit from unsplash

Evolution of Rheological Behaviors of Styrene-Butadiene-Styrene/Crumb Rubber Composite Modified Bitumen after Different Long-Term Aging Processes

Sign Up to like & get
recommendations!
Published in 2019 at "Materials"

DOI: 10.3390/ma12152345

Abstract: In this study, a new type of composite modified bitumen was developed by blending styrene-butadiene-styrene (SBS) and crumb rubber (CR) with a chemical method to satisfy the durability requirements of waterproofing material in the waterproofing… read more here.

Keywords: different long; long term; term aging; modified asphalt ... See more keywords
Photo from wikipedia

Review of Low-Frequency Noise Properties of High-Power White LEDs during Long-Term Aging

Sign Up to like & get
recommendations!
Published in 2021 at "Materials"

DOI: 10.3390/ma15010013

Abstract: Low-frequency noise investigation is a highly sensitive and very informative method for characterization of white nitride-based light-emitting diodes (LEDs) as well as for the evaluation of their degradation. We present a review of quality and… read more here.

Keywords: long term; frequency noise; power; term aging ... See more keywords
Photo by philinit from unsplash

Study on Stability of Mechanical Properties for Porous Fe-Cr-Al Alloys after Long-Term Aging

Sign Up to like & get
recommendations!
Published in 2022 at "Materials"

DOI: 10.3390/ma15103718

Abstract: Nowadays, both the ferrite phase and B2-structured intermetallic in the Fe-Cr-Al alloy system are developed as porous materials, which have been further applied as high-temperature filter materials in industry. This work presents a comparative study… read more here.

Keywords: long term; term aging; mechanical properties; porous alloys ... See more keywords

Effects of Long-Term Aging on Structure Evolution and Stress Rupture Property of DD6 Single-Crystal Superalloy

Sign Up to like & get
recommendations!
Published in 2023 at "Metals"

DOI: 10.3390/met13061063

Abstract: For China’s second-generation aero-engine blade DD6 single-crystal high-temperature alloy, the standard solution-treated test rods were subjected to long-term aging experiments (1290 °C, 1 h + 1300 °C, 2 h + 1315 °C, 4 h air… read more here.

Keywords: long term; dd6 single; term aging; single crystal ... See more keywords